No joint field · Bridge A = SPECULATIVE pedagogy

Labels: SOURCED HYPOTHESIS SPECULATIVE OPEN NONE (REAL = same-domain materials or linguistics, shown like SOURCED)

Path E · Materials scout (slot vs element, metal host)

Solute strengthening: what the host sets and what the solute sets — materials scout,

What’s claimed and how well supported

Labels on this page
STRONG ×1 WEAK ×1 SPECULATIVE ×7
Strongest label used
STRONG
Main caveat (quoted)
The Bridge A section and the Navajo remark come after the materials and are ◆ SPECULATIVE.

Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.

Terms on this page (8), plain-language definitions
Host (matrix)
Majority element/phase whose lattice dominates the material.
Solute
Intentional minority species dissolved in the host (alloying addition).
Dopant
Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
Dislocation
Line defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries.
Solid solution
Solute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase.
FCC
Face-centered cubic — many slip systems; Al, Cu, Ni typically ductile.
Valence (chem.)
Bonding capacity / oxidation-related electron count of an atom in context.
Valency (ling.)
Arity: how many actants a predicate takes; formal vs semantic valency can diverge.

Definitions quoted from the Chem for linguists primer glossary.

Date: 2026-10-15 PT (weekday research push, evening)
Status: Materials scout. The metallurgy is same-domain description from the sources opened below (REAL inside physical metallurgy). The grades are my analysis. The Bridge A section and the Navajo remark come after the materials and are SPECULATIVE. Not a correlate. Not a joint field.
Audience: Grant (syntax/semantics; less chemistry). End goal: designing new metal alloys. This is the first metal-hostMajority element/phase whose lattice dominates the material. test of the slot-vs-element split found in the Si-donor note and the lattice-strain model.
Vocabulary lock kept: percent-level additions are solutesIntentional minority species dissolved in the host (alloying addition). / alloying additions, not dopantsIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase. (Doping vs alloying vocabulary).
Does not: claim that a solute, a lattice site or a dislocationLine defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries. is an argument, operator or theta role; supply a chemical stand-in for a theta role; invent numbers or quotes; revise Bridge A; run the six-point ranking-edge spec.

Why this note. Two earlier notes found the same division of labour in two non-metal cases: a shallow donor in silicon (the host sets a template; the element shows up only at the core; Si donors: slot or element?) and the lattice-strain model of a crystal site (the site carries its own ideal radius r₀ and stiffness E; the ion is scored by its radius and charge; Navajo findings vs materials: a scorecard §2.1). The Si-donor note's open question 3 asked for a metal-host property with the same split. The navajo-to-materials note (§8 item 1) guessed that solute strengthening fits, because it is classically written with a "size misfit" and a "modulus misfit", and flagged the likeness of that pair to the lattice-strain (r₀, E) as my unverified inference. Tonight's job was to open solute-strengthening sources and check.

The case, in plain words. A metal deforms permanently when dislocations — line-shaped faults in the stacking of atoms — glide through the crystal. Put foreign atoms (solutes) into the crystal at random and they make the glide harder: each solute either squeezes or stretches the lattice around it (a size misfit), or is stiffer or softer than the host (a modulus misfit), or changes how easily atomic planes slip over each other at the dislocation's core (a chemical misfit, in the Mg paper below). A dislocation passing a misfitting atom gains or loses energy, so it gets caught. The yield strength rises. This is solid-solution strengthening (Family 3 in Mechanism taxonomy; companions SSS family, Chemical interaction vs valence effect).

What is new (one sentence). The modern elasticity form of solute strengthening divides its inputs cleanly — the host (or, in a high-entropy alloy, the averaged alloy) supplies the lattice constant, elastic constants, line tension and core structure, and each solute supplies only its concentration and its misfit volume ("Application of the theory thus requires only the alloy lattice constant, elastic constants, and the elemental misfit volumes in the alloy at the composition of interest", Yin et al. 2020) — and the Mg first-principles work shows the Si-donor shape (long-range part set by the host field times a size number; core part element-specific), but my earlier pairing of "size + modulus misfit" with lattice-strain "(r₀, E)" was mis-mapped: r₀ and E both belong to the site, while size and modulus misfit both belong to the solute in that host; the correct pairing is host stiffness ↔ E, host reference size ↔ r₀, size misfit ↔ (rⱼ − r₀), and the modulus misfit has no lattice-strain counterpart.


1. Sources

1.1 Opened this run

Key Source How read Used for
S1 Nöhring & Curtin, "Correlation of microdistortions with misfit volumes in High Entropy Alloys," arXiv:2009.11695v1 (preprint of Scripta Mater. 168 (2019) 119–123) arXiv PDF; text layer (equations garbled; prose only quoted) Curtin-line theory stated in brief: components at concentrations cₙ on the lattice; ΔVₙ "average misfit volume of the nth component in the alloy"
S2 Yin, Yoshida, Tsuji & Curtin 2020, "Yield strength and misfit volumes of NiCoCr and implications for short-range-order," Nat. Commun. 11: 2507 Europe PMC full-text XML (PMC7237450), TeX of formulas kept The full elastic-form strength formula with every parameter named; host-side vs solute-side inputs; misfit volume depends on environment; Ni₂Cr vs NiCoCr
S3 Winkens et al. 2023, "The influence of lattice misfit on screw and edge dislocation-controlled solid solutionSolute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase. strengthening in Mo-Ti alloys," Commun. Mater. 4: 26 Europe PMC full-text XML (PMC11549039); MathML flattened, so formulas read garbled Fleischer's δ_F vs Varvenne's δ_CV; binary √(x(1−x)) form; peak at 30–40 at% Ti, no softening; Labusch-like x^(2/3) fit for oxygen; e/a gate on dissolved O; screw dislocations and modulus misfit
S4 Yasi, Hector & Trinkle, "First-principles data for solid-solution strengthening of magnesium: From geometry and chemistry to properties," arXiv:1007.2585v1 (2010) arXiv PDF; two-column text layer; page 7 also read as a page image for Eqs. (9)–(11) Size vs chemical misfit; elasticity vs core; Fleischer-type √c law; solubility caps strengthening; potency–solubility trade-off
S5 Okamoto et al. 2016, "Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy," Sci. Rep. 6: 35863 Europe PMC full-text XML (PMC5075899) No solvent or solute in an equiatomic alloy; Fleischer = dilute, modified Labusch = concentrated; modulus misfit neglected; radius scale matters
S6 Joele & Matizamhuka 2021, "A Review on the High Temperature Strengthening Mechanisms of High Entropy Superalloys (HESA)," Materials 14: 5835 Europe PMC full-text XML (PMC8510092). Secondary: a review restating Varvenne et al. and Toda-Caraballo & Rivera Classical combined mismatch of modulus misfit and size misfit; drawback of the elastic model; adding an element can soften
S7 Toda-Caraballo & Rivera-Díaz-del-Castillo 2015, "Modelling solid solution hardening in high entropy alloys," Acta Mater. 85: 14–23 Abstract only (Lancaster University research-directory page, WebFetch) Labusch's approach needs a solvent/reference atom, "which does not exist in HEAs"; elastic (size) misfit dominant

Reused, not re-opened: Blundy & Wood 2003 and Shimizu et al. 2017 (lattice strain) and Saraiva et al. 2014 (Si donors), through the excerpt files of the two earlier notes.

Verbatim passages: excerpts-verbatim.md (not published here) (cut programmatically by make_excerpts.py from the saved text files; quote fragments in this note machine-checked with check_quotes.py).

1.2 Not opened (do not treat as read)

  • Varvenne, Luque & Curtin 2016, Acta Mater. 118: 164 ("Theory of strengthening in fcc high entropy alloys"): no arXiv version found; ScienceDirect not tried as a full text. Its content enters here only as restated by S1, S2 and S6. A search-result abstract was seen and is not used.
  • Varvenne, Leyson, Ghazisaeidi & Curtin 2017, Acta Mater. 124: 660 (overview): both EPFL Infoscience preprint URLs returned an AWS WAF bot challenge (HTTP 202, x-amzn-waf-action: challenge) to curl. Not routed around. (An earlier corpus note, Chemical interaction vs valence effect, records an EPFL preprint fetch on an earlier day; not re-read tonight.)
  • Geslin 2024 review, Comput. Mater. Sci. 232: 112624 (HAL hal-04276461) and a second HAL review (amu.hal.science hal-02082220): HAL served a "Making sure you're not a bot!" proof-of-work page. Not routed around.
  • Sboui, Geslin & Rodney 2025, Scripta Mater. ("What pins edge dislocations in random alloys? Comparing size and elastic heterogeneities"): SSRN returned a Cloudflare "Just a moment" check; HAL blocked as above. Only a search-result summary was seen (that modulus mismatch can pin bcc edge dislocations as strongly as size mismatch); not used as evidence.
  • Toda-Caraballo & Rivera 2015 full text: Southampton ePrints returned HTTP 401. Abstract only (S7).
  • A physics-based flow-stress model for Alloy 718 (Metall. Mater. Trans. A, 2022, doi 10.1007/s11661-022-06819-7): Springer returned a client challenge page. Not routed around.
  • Leyson & Curtin 2013, "Friedel vs. Labusch: the strong/weak pinning transition in solute strengthened metals," Phil. Mag. 93: 2428: Taylor & Francis abstract page timed out in WebFetch. Not opened.
  • Labusch 1970, Fleischer 1961 / 1963, Leyson et al. 2010 (Nat. Mater.), Okamoto et al. 2016 supplementary information (where their Fleischer/Labusch formulas are written out): not opened.
  • An arXiv API search (three queries) ran two minutes and returned nothing; dropped.

2. Sourced materials

2.1 (a) Which parameters belong to the host and which to the solute

The modern elastic form, every parameter named (S2). Yin et al. write the zero-temperature strength τ_y0 as a numerical prefactor × (line tension Γ / b²)^(−1/3) × (shear modulus term)^(4/3) × δ^(4/3), where δ = √(Σₙ cₙ ΔVₙ²)/(3V_alloy) (transcribed from the TeX in the PMC XML) "is the well-known δ-parameter describing the collective effect of the individual solute misfit volumes ΔVn". They name the rest: "b is the Burgers vector"; Γ "is the dislocation line tension"; "μV and νV are the Voigt average of shear modulus and Poisson’s ratio"; the prefactors "are associated with a typical fcc dislocation core structure consisting of two well-separated partial dislocations plus a small correction for elastic anisotropy". And the summary: "Application of the theory thus requires only the alloy lattice constant, elastic constants, and the elemental misfit volumes in the alloy at the composition of interest."

Sorted:

Host / matrix side ("slot") Solute side ("filler")
lattice constant → Burgers vector b, atomic volume V_alloy concentration cₙ
elastic constants → μ, ν, anisotropy correction misfit volume ΔVₙ
line tension Γ (from μ and b) —
core structure (two partials) → prefactors —

The host side can be seen on its own (S2). Comparing Ni₂Cr with NiCoCr: "The misfit parameter in the Ni2Cr alloy without SRO is quite similar to NiCoCr, and the lower strength arises mainly due to lower elastic moduli." Same filler number, different slot stiffness, different strength.

The classical (Labusch/Fleischer) form has two filler numbers (S6, S3, S5). The review S6, restating Toda-Caraballo & Rivera: "Mismatch parameter εi accounts for modulus misfit ηi and elastic misfit δi by the following relation:" — read from the MathML as εᵢ = (η′ᵢ² + α² δᵢ²)^(1/2) — "where α is a parameter that accounts for the difference in interaction forces between screw and edge dislocations and the solute atom; 3 < α < 16 for screw dislocations and α > 16 for edge dislocations" (as printed in the review). Both η′ (modulus) and δ (size; this review calls it "elastic misfit") are properties of the solute relative to the host; α is set by which kind of dislocation is moving, i.e. by the host's defect. In practice the modulus term is often dropped: Okamoto et al. state their estimate "is based on the assumption that atomic size misfit makes a major contribution to solid solution hardening and the contribution of the shear modulus misfit can be neglected. This is believed to be a reasonable approximation in many FCCFace-centered cubic — many slip systems; Al, Cu, Ni typically ductile. solid solutions52,53." Toda-Caraballo & Rivera (abstract): "elastic misfit is shown to be prominent; experimental evidence suggests it has a dominant effect with respect to other misfit forms." Where modulus misfit is still needed is the screw dislocation: "For screw dislocations, which generate no long range pressure field, there is no reduction of Un(xi, yj) to a simple form. Historically, a modulus misfit between solute and matrix has been used16,22." (S3).

But the solute's number is not the element's own number. Every solute parameter is defined in the host: - Mg (S4): the size misfit is "the logarithmic derivative of the lattice constant with solute concentration" — how fast this host's lattice grows as the solute is added. - NiCoCr (S2): "The misfit volume of an element in a given alloy reflects the average local atomic environment around the element." Measured values: "we determine the misfit volumes of Ni, Co, and Cr in NiCoCr as −0.493 Å3, −0.497 Å3, and +0.990 Å3, respectively." Even first-principles theory can miss it: "DFT provides very poor results for the misfit volumes in NiCoCr." - Radius tables are not a safe substitute (S5): with Goldschmidt radii the largest misfit in CrMnFeCoNi came out at 1.05 %, and "This may be due to the fact that the Goldschmidt radii do not give accurate values of the size misfit in the alloy"; with first-principles radii "the largest atomic misfit is found to be 4.1% between Cr and Co (or Fe)". - Fleischer's old misfit is retired for prediction (S3): "it is not useful for any model predictions."

So the division is clean in the formula (host block × solute block), but the solute block is a solute-in-this-host number, not a portable property of the element.

2.2 The Si-donor shape in a metal: long-range part from the host, core part element-specific (S4)

Yasi, Hector & Trinkle (Mg, 29 solutes) is the cleanest metal statement found of the Si-donor split:

  • The problem: "Existing theories of strength rely on solutedislocation interactions, but do not consider dislocation core structures, which need an accurate treatment of chemical bonding."
  • Two solute numbers: "The misfit of a solute quantifies relative changes in the lattice from dilute substitution of a solute, and consists of two important components: a “size” misfit for the change in the local volume, and a “chemical” misfit for the change in energy to slip the crystal in the basal plane." (Here the second number is a stacking-fault one, not a modulus misfit.)
  • Long range vs core: "The long-range strain and stress fields of a dislocation are known from anisotropic elasticity[21], and so the change in local volume around a solute (size misfit εb, the logarithmic derivative of the lattice constant with solute concentration) controls the solute-dislocation interaction. In the dislocation core, the interaction energy is largest, but it is no longer described by elasticity." The size term stays the main one even there: "This approximation is the largest contribution to the interaction energy; the next largest contribution is from the slip in the partial cores and the stacking fault." And: "The size-misfit approximation is expected to be accurate in the far-field, and is accurate even in the partial cores where the interaction is the strongest."
  • Elasticity alone fails at the Mg core: "All of the elasticity predictions contradict our atomic-scale calculations:" (screw and edge interaction forces came out equal, where elasticity predicts a weak screw interaction).
  • The host is computed once, the solutes as two numbers each: "This permits us to use much simpler and computationally efficient first-principles calculations of misfits with our first-principles calculation of pure Mg dislocation cores."
  • Counter-cases inside the same paper. The two solute numbers are not independent: "The negative εb εSFE term shows that the effect of the size and chemical misfits is not completely independent, but that due to the geometry of the dislocation core—where the sites of largest slip energy are neighboring sites of largest strain energy—a larger gradient can be produced by having the size and slip misfits with opposite signs. However, the magnitude of the denominators also shows that the size misfit is the dominant interaction." And the filler partly picks its slot inside the core: "The particular site that produces the largest interaction force changes depending on the magnitudes of the misfits εb and εSFE, leading to different regimes."

The review S6 states the same limit for the elastic (Curtin) form: "The drawback of the elasticity model as represented above is that a chemical-specific core interaction is absent and fluctuations due to local structural and chemical disorder in HEAs are neglected."

2.3 When there is no host: high-entropy alloys

  • "there are no “solvent” or “solute” atoms in equiatomic alloys" (S5); "there are no definite criteria which distinguish a solute from a solvent" (S6); Labusch's approach "is based on the misfit produced in the lattice of a solvent/reference atom, which does not exist in HEAs" (S7).
  • The Curtin-line fix: "Varvenne et al. [56,57] assumed each element in an alloy to be a solute embedded in the average effective medium matrix of the surrounding material" (S6); the δ_CV parameter "properly quantifies the volumetric misfit of each atom in a solid solution compared to a virtual “average matrix”, and so is appropriate across the entire concentration range" (S3).
  • The older work-around picks a host by hand: Okamoto et al. "make a rough estimate by assuming that the atoms with the largest and smallest sizes are the “solvent” and “solute” atoms, respectively" (S5).

So in a high-entropy alloy the "slot" (μ, ν, V_alloy, b) is built from the fillers by averaging, and every element is at once part of the host and a solute in it.

2.4 (b) How concentration enters — the Bridge A concentration-window angle

  1. Dilute, isolated obstacles (Fleischer-type): strength ∝ √c. Yasi et al. use "a dilute-concentration, weak-obstacle model for solid-solution strengthening from Fleischer[23]" and state that "This point-pinning model is applicable for isolated obstacles with a short-ranged—on the scale of the soluteseparation distance—interaction force between solute and dislocations, and hence will capture the dilute-concentration limit." Their Eq. (9) (read on the page image of p. 7; garbled in the text layer) gives a strengthening that scales as F_max^(3/2) and √c_s (their wording, as read on the page image), and Eqs. (10)–(11) carry the factor c_s^(1/2). "The concentration-independent prefactor in Equation 10 is the solute “strengthening potency.”"
  2. Collective pinning (Labusch-type): strength ∝ c^(2/3). Winkens et al. fit oxygen strengthening in Ti-9Mo with "A simplified Labusch-like strengthening, H=A⋅xO2/3+HO−free" (text layer; the exponent is 2/3 on x_O). In the Curtin elastic form (S2), strength ∝ δ^(4/3) with δ ∝ √(Σ cₙ ΔVₙ²), i.e. strength ∝ (Σ cₙ ΔVₙ²)^(2/3); for one dilute solute that is c^(2/3) (my arithmetic on the S2 formula, assuming the host atoms' own misfit term is negligible at low c — not a statement in S2).
  3. Which applies where (S5): the "classical Fleischer model49 and modified Labusch model50,51, which were originally applied to dilute and relatively concentrated binary solid-solutions, respectively". The crossover itself (Leyson & Curtin 2013) was not opened.
  4. Concentrated binaries: a peak in the middle. For Mo–Ti, the Curtin misfit "is simplified to δCV=1a∂a∂xTixTi(1−xTi)" (text layer; it reads δ_CV = (1/a)(∂a/∂x_Ti)·√(x_Ti(1−x_Ti))). With the S3 edge formula (strength ∝ δ_CV^(4/3) at fixed moduli), that is strength ∝ [x(1−x)]^(2/3) if the lattice-parameter slope were constant — a hump peaking at 50 % (my arithmetic). Winkens et al. state the same symmetry for their screw model and why the data depart from it: "According to Eq. (7), the values of the parameter ΔE~p are symmetrical about a maximum value at 50 at% Ti. Thus, the yield strength is also expected to be symmetrical about a maximum at 50% Ti" — but because self-interstitial formation energy falls from Mo to Ti, "the maximum in yield strength is shifted to smaller Ti contents, consistent with the peak observed at around 40 at% in the experimental data." Measured: "The peak strength or hardness is detected at 30 or 40 at% Ti, which will be rationalized later. There is no softening observed." And Mo–Ti's lattice parameter is strongly non-linear, so "the misfit values are very sensitive to the precise fit to the data in the region 40–50 at% Ti, where the derivative changes from low to high values."
  5. Across binaries (S5, their Fig. 6): "The extent of solid solution hardening increases with increase in solute concentration for all the alloys listed in Fig. 6, but the effect is more pronounced as the atomic size misfit between the solvent and solute atoms increases."

Plainly: concentration enters with diminishing returns (square root, or two-thirds power), there is no built-in count at which strengthening stops, and in a concentrated binary the hump at mid-composition comes from the x(1−x) symmetry: past 50 % the "solute" is the majority and the labels swap.

2.5 (d) Ceilings and over-concentration

  • The ceiling is solubility, and it is tied to potency (S4). The "solubility of a solute controls the maximum possible" √c_s (the √ is on the page image; the text layer drops it), "and hence the maximum possible strengthening of a solute in an alloy." The Mg design map "also gives a guide to solubility—which decreases with increasing misfit magnitudes." So the same misfit numbers that make a solute potent narrow its window: "Yttrium represents a reasonable compromise between strength and solubility."
  • The host can gate whether a solute dissolves at all (S3). For interstitial oxygen in Mo–Ti: "For solid solutions with ea≥5.7, no dissolved O was experimentally detected. The threshold of 5.7 is reached at 15 at% Ti, if 6 and 4 valenceBonding capacity / oxidation-related electron count of an atom in context. electrons are assumed for Mo and Ti, respectively. In agreement with these results, no interstitial O was detected in Mo-10Ti ( ea=5.8 ) using APT, while the entire O was dissolved in Mo-80Ti ( ea=4.4 )." A host property (electrons per atom) decides whether the slot is open.
  • More elements is not more strength (S6, restating Varvenne et al.): high strength comes from "maximising the shear elastic modulus of the matrix and maximising the concentration-weighted mean-squared misfit volume quantity" and "the number of components and/or equiatomic composition does not lead to high strengthening." In the Toda-Caraballo model as S6 restates it, adding an element can lower strength: "an addition of Fe on CoCrNi softens the alloy because of the decrement of the sum of areas, viz., CoCrNi is 9.92 × 10−6 while CoCrFeNi is 8.4 × 10−6" — the new element dilutes the misfit rather than adding to it.
  • Not found: no opened source states an "over-concentration" regime in which adding more of one solute to one host lowers strength while it stays in solution. Mo–Ti says outright "There is no softening observed" over 0–80 at% Ti. Past the solubility limit a second phase forms, which leaves the solid-solution family (precipitation is Family 4; Precipitation family).

3. (c) Does size + modulus misfit really parallel lattice-strain (r₀, E)? — grading (analysis)

What the lattice-strain model has (from the earlier note's excerpts). Shimizu et al.: "r0 is the radius of a hypothetical cation that substitutes into the site with zero strain; rj is the ionic radius of the element of interest; E is the effective Young’s modulus for the lattice site". Blundy & Wood: the lattice-strain models treat "trace ions as charged point defects in a dielectric, elastic continuum", and "The elastic strain energy is roughly symmetrical about an optimum ionic size."

Line-up, corrected:

Lattice strain (site partitioning) Solute strengthening (elastic form) Match?
r₀ — site's ideal radius (site) host lattice constant / V_alloy / b (host) yes, both slot-side reference sizes
E — site's Young's modulus (site) μ, ν of host or average alloy (host) yes, both slot-side stiffness
rⱼ − r₀ — ion's mismatch to the site ΔVₙ, size misfit (solute in host) yes, both filler-vs-slot size mismatch
penalty roughly symmetric about r₀ ΔVₙ enters squared (S2 formula), so too big and too small count alike at equal size (my reading of the formula) yes in the elastic form; Mg cross term (S4) breaks the sign symmetry once core chemistry enters
ion charge (selects the charge series) — no counterpart
— modulus misfit η′ (solute in host) no lattice-strain counterpart (the parameter list in S2.2 of the earlier note has no ion stiffness)
— chemical / stacking-fault misfit (Mg, S4) no counterpart
— the moving dislocation (edge vs screw sets α, and whether a long-range pressure field exists) no counterpart: partitioning has no moving defect

Grades.

  • My earlier inference as stated — "(r₀, E) resembles the size + modulus misfit pair": WEAK (superficial, mis-mapped). It paired two slot parameters with two filler-in-host parameters. The modulus misfit has no partner, and E's real partner is the host modulus, not the modulus misfit.
  • The corrected mapping — slot stiffness × (filler-vs-slot size mismatch)², in elasticity: STRONG, for the elastic, size-dominated form (fcc edge-dislocation theory; many fcc solid solutions per S5). Both are sourced as elastic-continuum models; both put the reference size and stiffness on the slot and only a mismatch on the filler; S2 states the host/solute division of inputs in so many words.
  • The host/solute split itself (Si-donor open question 3): STRONG, with the Si-donor shape stated by S4: the long-range part is host field × size misfit; the core part is element-specific (chemical misfit), smaller than the size part in Mg but needed.

Counter-cases (each weakens the parallel; none reverses it). 1. The filler number is host-relative. rⱼ in lattice strain is a tabulated ionic radius; ΔVₙ is measured in this alloy and "reflects the average local atomic environment" (S2), and radius tables give the wrong misfit (S5). The filler is not a portable feature bundle. 2. Core chemistry. In Mg, elasticity predictions "contradict" the atomic-scale results (S4); the size and chemical misfits interact (cross term), and the strongest site depends on the misfits — the filler partly chooses its slot in the core. 3. No host in high-entropy alloys. The slot parameters are averages over the fillers (S3, S5, S6, S7). The lattice-strain model has a milder version: "The lattice strain parameters (D0, r0, E) are, in general, a function of pressure (P), temperature (T), and composition (X)" (Shimizu et al., earlier note). 4. Screw dislocations. No long-range pressure field, so no simple size form; modulus misfit was the classical stand-in (S3). The "slot" changes with the kind of defect moving through it. 5. Different outcome. Partitioning is an equilibrium distribution between crystal and melt; strengthening is a barrier to a moving defect. The parallel is in the bookkeeping of parameters and the elastic penalty, not in the outcome.

Host gating, as in Si donors. In silicon the host decided how much the donor's identity leaks through (multivalley Si vs single-valley GaAs). Here the host's dislocation does: for edge dislocations a long-range size term carries most of it; for screw dislocations, with no long-range pressure field, the solute's short-range, element-specific terms carry it (S3; S4 found Mg screw and edge forces nearly equal, against elasticity's prediction).


SPECULATIVE Cross-domain section. Open after the materials.

4. Bridge A — SPECULATIVE (after the materials)

Bridge A (locked): doping concentration windows and over-doping ↔ valencyArity: how many actants a predicate takes; formal vs semantic valency can diverge., argument saturation and over-arity. What solute strengthening adds, as shape only:

  • The window's upper edge is a solubility ceiling, not a saturation of slots. Strength grows sublinearly (√c or c^(2/3)) with no internal count at which it stops; the stop is where the solid solution ends (S4). Argument saturation is discrete (a verb's slots fill, and one more argument is out). The lock "continuous wt% ≠ discrete arity" holds; the parallel is to the edge of a window, as in Solubility windows, not to a count.
  • Potency and window width trade off through one number. A solute with a big misfit strengthens a lot per atom but dissolves less (S4). If anything on the language side matched, it would be a filler whose strong selection narrows how many hosts accept it — I know of no sourced linguistic statement of that, and none is claimed.
  • The "over" is not over-doping. Inside the solid solution no opened source shows softening from more of one solute (Mo–Ti: none, 0–80 at%). In concentrated binaries the mid-composition hump is a host/solute swap, not an overrun; in multicomponent alloys an extra element can soften by diluting the misfit (S6). Neither is over-arity.
  • Host gate on entry. The e/a gate for oxygen (S3) is a host property deciding whether a slot exists at all — the nearest thing here to a frame that does or does not license a participant. Shape only.

Navajo remark ( SPECULATIVE, one paragraph). On Navajo Decoded, a role-bearing pronoun slot is set by the verb and a noun links to it by features. The elastic form of solute strengthening is the cleanest metal case found so far of "frame parameters first, filler parameters second" (S2's input list). Two of tonight's counter-cases cut against using it for Grant's layered-assignment conjecture: the filler's number is host-relative (it is not a portable feature bundle), and in a high-entropy alloy the frame is computed from the fillers. No chemical stand-in for a theta role or a feature bundle; not a correlate; Bridge A unrevised; not a joint field.


5. Open questions

  1. Fleischer–Labusch crossover. At what concentration (and for which misfit strengths) does √c give way to c^(2/3)? Leyson & Curtin 2013 not opened. → Taken up 2026-10-19 evening in Fleischer–Labusch crossover: when does one solute pin alone?: zero-T ~10⁻²; finite-T below ~10⁻⁴ for Al–X and Mg–Al (Varvenne et al. 2017 restating Leyson & Curtin 2013). Refines §2.4 item 1 here: per that overview, Yasi et al.'s √c model predicts "trends in solute strengthening at 0 K"; at finite temperature ordinary dilute alloys are already in the collective (c^(2/3)) regime. This note is otherwise left as written.
  2. Is the modulus misfit a co-equal filler number anywhere? Sboui, Geslin & Rodney 2025 (bcc edge; size vs elastic heterogeneity) would test this; blocked tonight (SSRN Cloudflare, HAL bot check).
  3. Portability of a filler number. Yin et al. find Ni's apparent volume in NiCoCr close to that in Ni₂Co and Ni₂Cr; how far across hosts does one element's misfit volume carry? (A direct test of "the element brings a fixed feature".) → Taken up 2026-10-16 evening in Misfit volume: does the element carry its size?: two layers — the misfit is host-relative by construction (STRONG); the apparent volume carries within a family in one structure (STRONG) but is not an element constant (concentration, magnetism, cross-host spreads; WEAK). Counter-case 1 in §3 ("The filler is not a portable feature bundle") is refined there: the apparent volume is a partly portable element number, the misfit is not. This note is otherwise left as written.
  4. Lattice-strain derivation. Brice 1975 and Blundy & Wood 1994 still not opened — would confirm that the ion's own stiffness is absent from the strain energy (the basis of "no counterpart" for modulus misfit in §3).
  5. Process side. As in the Si-donor note: nothing opened on how a process puts the solute on the site; strengthening is a result-side property.

6. Separation

SOURCED (inside metallurgy)

The elastic strength formula and its inputs (S2); misfit volumes as environment-dependent (S2); Fleischer vs Varvenne misfit, the binary √(x(1−x)) form, the Mo–Ti peak and no softening, the Labusch-like x^(2/3) oxygen fit, the e/a gate, screw dislocations and modulus misfit (S3); size vs chemical misfit, elasticity vs core, √c law, potency, the solubility cap and trade-off (S4); no solvent/solute in equiatomic alloys, Fleischer = dilute and Labusch = concentrated, modulus misfit neglected, radius-scale sensitivity (S5); the classical combined mismatch, the elastic model's drawback, softening on adding Fe (S6, secondary); the HEA reference-atom problem (S7, abstract). Lattice-strain and Si-donor statements as quoted in the earlier notes.

ANALYSIS (mine, beside the sources)

The host/solute table; the c^(2/3) and [x(1−x)]^(2/3) reductions (arithmetic on sourced formulas); the corrected line-up and the grades in §3; the host-gating comparison with Si donors.

SPECULATIVE

§4 (Bridge A shapes; Navajo remark). Grant's layered-assignment frame remains his.

Not claimed

No chemical correlate. No chemical stand-in for a theta role, a feature bundle or a slot. Not a joint field. Bridge A unrevised. No over-concentration softening regime claimed. Nothing from the blocked or unopened sources used as evidence.


7. Verdict

Yes — solute strengthening has the split: the host (or the averaged alloy) supplies lattice size, elastic constants, line tension and core structure; each solute supplies a concentration and a misfit, stated as such by Yin et al. 2020, with the Si-donor shape (long-range host field × size misfit; element-specific core term) stated for Mg by Yasi et al. STRONG for the split and for the corrected mapping to lattice strain (host stiffness ↔ E, host size ↔ r₀, size misfit ↔ rⱼ − r₀). WEAK for my earlier pairing of "size + modulus misfit" with "(r₀, E)", which was mis-mapped; the modulus misfit has no lattice-strain partner. Concentration enters as √c (dilute, Fleischer-type) or c^(2/3) (collective, Labusch-type), peaks mid-composition in a concentrated binary, and is capped by solubility, which falls as misfit (and so potency) grows; no opened source shows over-concentration softening within the solid solution.


v0 — 2026-10-15 PT, evening. Pointers added: corpus-reading-order row; CONCLUSIONS-v1-addendum paragraph; site-content-map (inventory, Path E list, slug, near-ready, Path E page row); back-pointer at navajo-to-materials-connections §8 item 1 and Si-donor open question 3. Speculation flagged. Bridge A lock unrevised. No joint field.

Corpus note: solute-strengthening-slot-vs-element-v0.md. The metallurgy is same-domain description from the sources the note lists as opened; blocked and unopened sources are listed and not used. The grades (STRONG / WEAK) are analysis, not a declared correlate. The Bridge A section and the Navajo remark come after the materials and are speculative. No chemical stand-in for a theta role. Bridge A unrevised. Not a joint field.