No joint field · Bridge A = SPECULATIVE pedagogy

Labels: SOURCED HYPOTHESIS SPECULATIVE OPEN NONE (REAL = same-domain materials or linguistics, shown like SOURCED)

Path B · Bridge A

Depth note — Precipitation / second-phase family contrast

What’s claimed and how well supported

Labels on this page
SPECULATIVE ×7
Strongest label used
SPECULATIVE
Main caveat (quoted)
Materials first; Bridge A only after.

Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.

Terms on this page (6), plain-language definitions
Host (matrix)
Majority element/phase whose lattice dominates the material.
FCC
Face-centered cubic — many slip systems; Al, Cu, Ni typically ductile.
Dopant
Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
Precipitate
Second-phase particle that forms (often on aging) and blocks dislocations.
Solute
Intentional minority species dissolved in the host (alloying addition).
HCP
Hexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.

Definitions quoted from the Chem for linguists primer glossary.

Date: 2026-09-19 PT
Audience: syntax/semantics readers building alloy-design literacy (Chem for linguists)
Purpose: One linguist-readable contrast of precipitation / second-phase “windows” across the corpus Family 4 hostsMajority element/phase whose lattice dominates the material. — what is “saturated,” what “over” looks like, which process clock (metastability) matters, and which vocabulary to keep (never dilute doping). Materials first; Bridge A only after.
Locks: Bridge A locked as SPECULATIVE supporting case only. Materials facts first; linguistic parallels only in a flagged box. No joint-field claim. Dowty / Triskelion / Merge·Agree / kanji / Navajo θ-typing not advanced here.
Hard separations: precipitation ≠ electronic carrier saturation; SSS ≠ precipitation; wanted γ′/T₁ ≠ unwanted GB β; Fe–C quench/temper is a transformation cousin, not “carbide doping of iron.”

Companion stack: Mechanism taxonomy §4 (Family 4); Process metastability (three clocks); Doping vs alloying vocabulary (Path D); Ni–γ′; Al–Li; Mg host; Al–Mg (Al–Mg β sensitization foil); Fe–C; Conclusions.


0. One-screen claim

Four corpus flavors share a second-phase / morphology surface without sharing one mechanism or one “over” physics:

Peg Second phase / product Wanted? Headline meter First “over” (typical)
Ni–γ′ Coherent ordered γ′ (Ni₃Al-class) in FCCFace-centered cubic — many slip systems; Al, Cu, Ni typically ductile. γ Yes (creep strength) γ′ size / f_γ′ / solvus-relative HT Overaging / rafting gone wrong / TCP
Al–Li Coherent δ′ (Al₃Li) and/or plate T₁ (Al₂CuLi) Yes (strength + density/E) Li% (ρ, E) + T₁/δ′ size–fraction + TMP Toughness / anisotropy / SCC / overage / melt Li loss
Mg β (+ Al–Mg β foil) β-Mg₁₇Al₁₂ in Mg-AZ; β-Mg₂Al₃-related on Al–Mg GBs Ambivalent (Mg) / No (Al–Mg) IMC fraction / galvanic vs strength; DoS (Al–Mg) Brittle/galvanic β (Mg); GB sensitization IGC (Al–Mg)
Fe–C (brief nod) Cementite / pearlite; quench martensite (± RA) → temper Morphology- and path-dependent C% + TTT/CCT + temper Cementite networks; brittle as-quenched M; temper–RA

Pedagogy in one line: “precipitation window” is a family name, not a single physics. Name the phase, whether it is wanted, and which clock before hanging under/useful/over.

Vocabulary lock (all four): prefer alloying / formers / carbide / intermetallic / precipitation hardening. Do not call percent-level Li, Al, or C “dopantsIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase..” Reserve dopant for dilute electronic (etc.) intent (Si:P, GaN:Mg, oxide electronic).


1. Ni–γ′ (Ni₃Al-class) — coherent ordered precipitates; overaging / TCP

Pointer: Ni–γ′.

What it is (REAL)

Ni-superalloys intentionally grow a dense array of coherent ordered γ′ (L1₂, Ni₃(Al,Ti)-class) inside FCC γ. The precipitateSecond-phase particle that forms (often on aging) and blocks dislocations. is the strength win — creep resistance at high homologous T for blades/disks. Solution (sub- or super-solvus) → cool/quench → multi-step age writes the useful size distribution; service T–time–stress then ripens, rafts, or nucleates wrong phases.

What is “saturated” / useful

Fine coherent γ′ size / spacing / volume fraction after controlled aging — enough f_γ′ and the right cutting↔Orowan balance for the duty, without TCP-prone chemistry and without coarsening past the useful window.

What “over” looks like (plural already)

Overrun mode What goes wrong
Overaging / Ostwald ripening γ′ grows; spacing ↑; strength/creep ↓
Rafting gone wrong Stress-aligned γ′ / widened channels soften or crack under the wrong misfit–stress pairing
TCP (σ, μ, Laves, …) Brittle particles; crack starters; deplete Re/W/Mo/Cr from γ — wrong second phase, not “too much γ′” alone
Excess formers / wrong HT Unworkable hardness; primary-γ′ miss; incipient melting

Process clock (metastability)

Clock Ni–γ′ reading
Diagram γ / γ′ solvus; f_γ′(T); TCP-prone corners
Process Sub- vs super-solvus solution + cool + age schedule
Service Coarsening / rafting / TCP under duty T–time–stress

Kinetic one-liner: solution clears the slate; aging writes fine γ′; service erases it unless chemistry and T–stress stay inside the envelope (Process metastability §2.3).

Vocabulary

γ′-formers / Al–Ti alloying / precipitation hardening — never “doped nickel” for structural γ′ intent.


2. Al–Li — δ′ (Al₃Li) coherent vs T₁ (Al₂CuLi) plate; toughness / anisotropy

Pointer: Al–Li.

What it is (REAL)

Aerospace Al–Li / Al–Cu–Li alloys put Li in FCC Al for density↓ (~3% per 1 wt% Li) and E↑ (~5–6% per 1 wt% Li), then harden by intentional precipitates:

Phase Habit Typical story
δ′ Al₃Li Coherent L1₂ spheres High-Li / 2nd-gen class; shearable → planar slip → toughness / anisotropy risk
T₁ Al₂CuLi Plates on {111} Cu-bearing 3rd-gen (2099 / 2195 / 2050-class); often principal strength; stretch helps nucleation

Same Al host as AA5083 Al–Mg, but Family 4 precipitation, not SSS-first sensitization. Closest pedagogical cousin: Ni–γ′ (wanted precipitate) — different meters (ρ/E/anisotropy/SCC vs creep/TCP/oxidation).

What is “saturated” / useful

Goal-relative: enough Li for density/E targets; Cu–Mg–(Ag)–Zr/Sc balance so the wanted precipitate is T₁-first (modern) or a controlled δ′+T₁ mix; solution → quench → stretch → age that yields fine intragranular T₁/δ′, acceptable toughness/corrosion, controlled texture.

What “over” looks like (plural — teach this)

Overrun mode What goes wrong
Anisotropy Direction-dependent strength/toughness/E; thick-plate gradients
Low toughness / planar slip Shearable δ′ → localized slip bands (2nd-gen fame)
SCC / IGC GB precipitates / PFZs; T₁ electrochemical contrast
Overaging / δ′ coarsening Strength↓; thermal instability under warm service
Quench-induced coarse plates Soft / anisotropic mid-thickness (process clock)
Melt Li loss / weld HAZ Composition drift; fusion Li burn-off; FSW NZ soft zones

Process clock (metastability)

Clock Al–Li reading
Diagram Al–Li / Al–Cu–Li solvus + precipitate zoo (δ′ / T₁ / θ′ / S'…)
Process Solution T + quench rate + stretch + age T–time (+ melt cover practice)
Service δ′ coarsening / continued precipitation; weld thermal cycles

Kinetic one-liner: solution/quench buys supersaturation; stretch/age writes fine T₁/δ′; service and weld heat ripen or dissolve them.

Vocabulary

Alloying / Li addition / precipitation hardening / δ′- or T₁-formers — never “Li-doped aluminum” for structural aerospace intent. Path D: same shelf as Ni–γ′, not Si:P / GaN:Mg.


3. Mg β (Mg₁₇Al₁₂) — often unwanted GB phase / sensitization analog

Pointers: Mg host (Mg as host); Al–Mg (Al–Mg AA5083 β as soluteIntentional minority species dissolved in the host (alloying addition).-overrun foil).

What it is (REAL) — two hosts, one β letter, different jobs

Host β identity (teaching) Role
Mg–Al (AZ-class) β-Mg₁₇Al₁₂ discontinuous / continuous precipitation in HCPHexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic. α Ambivalent: can contribute strength in cast/age paths; often galvanic cathode, ductility killer, creep morphologies that hurt
Al–Mg (AA5083) GB β (Mg₂Al₃ / Al₃Mg₂-related) from warm-service precipitation out of supersaturated SSS Unwanted — sensitization / IGC / IGSCC; not the strength win (strength was SSS)

Do not collapse: Mg-host β (IMC in a Mg matrix) ≠ Al–Mg GB β (sensitization of an Al matrix). Same Greek letter, different phase stoichiometries, different design verdicts — shared lesson is “second phase on boundaries can be a corrosion or brittleness liability.”

What is “saturated” / useful

Host Useful state
Mg–AZ Intended IMC fraction / distribution for the alloy goal when β is helpful — or a temper that keeps harmful networks sparse
Al–Mg Enough dissolved Mg for SSS inside a service T–time box that keeps GB β sparse (DoS / sensitization windows)

What “over” looks like

Host Typical “over”
Mg host Brittle β networks; galvanic attack; creep-weakening morphologies; plus ignition / anisotropy misses that are not β alone
Al–Mg Warm-service GB β → IGC / IGSCC (service clock of an intentionally supersaturated SSS)

Process clock (metastability)

Clock Mg β / Al–Mg β
Diagram Mg–Al / Al–Mg solvus; β fields
Process Cast segregation + age (Mg); solution + quench (Al–Mg)
Service β coarsening / galvanic exposure (Mg); ~40–220 °C sensitization (Al–Mg)

Kinetic one-liner (Al–Mg foil): solution/quench buys supersaturation; warm service spends it as sensitization risk (Process metastability §2.1).

Vocabulary

Solute / alloying / intermetallic / β phase — never “doped Mg” or “doped Al” for these structural stories. Al–Mg is Family 3 SSS with a Family 4 failure mode; Mg-AZ mixes SSS + precipitation.


4. Fe–C — cementite / martensite family (brief nod; transformation-adjacent)

Pointer: Fe–C. Filed in taxonomy Family 4 as a transformation / morphology cousin — interstitial C + eutectoid / quench / temper — not pure Labusch SSS and not electronic doping of iron.

What it is (REAL), in one screen

Path Product Design note
Slow cool Pearlite ± proeutectoid α or Fe₃C Hypereutectoid cementite networks = brittle GB path
Quench Martensite (BCT, C supersaturated) ± RA Metastable — not an equilibrium phase field; usually too brittle as-quenched
Temper Transition carbides → cementite; recovery; RA may decompose Controlled relaxation you can live with

What is “saturated” / useful

Intended constituent / temper state for the duty (pearlite; tempered martensite; …) — C% plus TTT/CCT plus temper schedule, not “max C.”

What “over” looks like

Cementite networks; brittle as-quenched M put into service; temper embrittlement / RA issues — transformation / morphology overrun.

Process clock

Diagram (Fe–Fe₃C) ≠ TTT/CCT ≠ temper/service aging. Austenitize dissolves C; quench traps it; temper schedules the relaxation.

Vocabulary

Carbide / alloying / heat treatment — never “C-doped iron” for structural steel intent.


5. Side-by-side (Family 4 contrast)

Ni–γ′ Al–Li Mg β / Al–Mg β Fe–C (nod)
Wanted second phase? Yes — γ′; TCP unwanted Yes — T₁ (modern) / controlled δ′ Mg: ambivalent; Al–Mg: No Morphology-dependent
Coherent ordered? Yes (γ′ L1₂) δ′ yes; T₁ plate β often discontinuous / GB Cementite / M different story
Headline “over” Overaging / TCP Toughness / anisotropy / SCC / overage / Li loss Galvanic/brittle β; sensitization Cementite networks; brittle M
Density/E first-class? No Yes (Li) No No
Useful state metastable/fine? Central Central Al–Mg SSS yes; Mg precipitates yes Central (M / temper)
Honest word γ′-formers / alloying Alloying / precipitation Solute / IMC Carbide / HT
Bridge A second-phase peg Strong (wanted vs TCP) Strong (wanted vs wrong GB/coarse) Strong (unwanted / ambivalent) Strong (morphology + quench)

Stacked pedagogy: Ni–γ′ and Al–Li train wanted-precipitate windows with different meters; Mg β / Al–Mg β train unwanted or ambivalent second phases; Fe–C trains that the useful state may be a metastable transformation product. Shared Family 4 label; plural physics.


6. Hard separation — precipitation ≠ electronic carrier saturation

Precipitation / second-phase (this note) Electronic doping (Family 1)
Slot filled Obstacle array / phase morphology / (Fe–C) transformation product Carriers / bands / Fermi level
Success meter Strength, creep, toughness, corrosion, density/E, hardness Controlled n or p
“Saturated” means Useful precipitate size–fraction or temper state Useful extrinsic carrier window
“Over” examples Overaging, TCP, planar-slip toughness collapse, GB β, cementite networks Mott / impurity band, self-compensation, mid-gap recombination
Prefer saying Alloying / formers / carbide / IMC Dopant

Same surface pattern (“intentional foreigners in a host”). Different slots. Do not read Al–Li Li% or f_γ′ as N_D; do not read Si:P as precipitation hardening.


SPECULATIVE Cross-domain section. Open after the materials.

7. SPECULATIVE Bridge A after materials

Everything in this section is pedagogical analogy. It does not make doping × θ-roles a joint field.

Materials fact SPECULATIVE Bridge A reading
Useful fine γ′ / T₁/δ′ / tempered M / sparse-β service state Successful “saturation” of a named design configuration
Under-age soft; under-Li soft/heavy; under-tempered wrong Under-filling relative to that configuration
Overaging, TCP, planar-slip collapse, sensitization, cementite networks Plural “over” modes — count ladder is a memory peg, not one physics
Continuous wt% + continuous T–time–stress Continuous composition ≠ discrete linguistic arity — do not force integer slots onto f_γ′ or Li%
Precipitation window ≠ carrier window Hang Bridge A only after naming Family 4 vs Family 1; never equate Ostwald ripening with Mott MIT

Earn: one depth note that forces the reader to say which second-phase story before using under/useful/over; pairs Al–Li (peg #14) with Ni–γ′ wanted-precipitate pedagogy and with Al–Mg unwanted-β foil.
Collapse: if T₁ cutting ≡ θ-saturation; if β ≡ adjunct; if cementite ≡ fossil morpheme; if “precipitation saturation” is treated as identical to electronic carrier saturation; if Navajo morphological typing is treated as evidence (typing stays parallel).

Explicit non-equations: - γ′ / δ′ / T₁ / β / Fe₃C ≠ θ-role fillers.
- Overaging ≠ over-arity as science identity.
- Three clocks ≠ synchronic/diachronic linguistics (mnemonic only in the metastability note — collapse if elevated).


8. What to do next (reader checklist)

  1. Pick the host; open the checklist.
  2. Name whether the useful obstacle is wanted precipitate, unwanted GB phase, or transformation product.
  3. Name which clock (diagram / process / service).
  4. List the plural “over” modes for that host — do not stop at “past the solvus.”
  5. Audit vocabulary (Path D): alloying/precipitation ≠ dopant.
  6. Only then, if useful for memory, hang the SPECULATIVE Bridge A count peg.
  7. Cross-check Family 1 electronic hosts if the abstract said “doping” — mechanism may not be precipitation at all.

9. Sources / corpus pointers

Source Role
Ni–γ′ REAL: γ′ solvus, overaging, rafting, TCP
Al–Li REAL: δ′/T₁, density/E, toughness/anisotropy/SCC, quench/age clocks
Mg host REAL: β-Mg₁₇Al₁₂ ambivalent; galvanic/creep/ignition
Al–Mg REAL: Al–Mg GB β sensitization foil
Fe–C REAL: cementite / martensite / temper transformation cousin
Mechanism taxonomy §4 Family 4 map
Process metastability Three clocks; Al–Mg / Fe–C / Ni–γ′ kinetics stories
Doping vs alloying vocabulary Path D — never dilute doping for these pegs
Conclusions Fourteen-host table; Bridge A lock

v0 — 2026-09-19 PT continue-research. Real metallurgy contrast across Family 4; Bridge A flagged SPECULATIVE. Precipitation ≠ electronic carrier saturation. No joint field.

Corpus note: depth-precipitation-family-contrast-v0.md. Cross-domain mappings are speculative.