Worked walkthrough — Al–Li aerospace alloys through the alloy-design checklist
- 1 Diagram
- 2 Mechanism
- 3 Failure past the window
- 4 Metastability
- 5 SPECULATIVE Bridge A peg
What’s claimed and how well supported
- Labels on this page
- SPECULATIVE ×9
- Strongest label used
- SPECULATIVE
- Main caveat (quoted)
- Locks: Bridge A locked as ◆ SPECULATIVE supporting case only (pedagogy after materials).
Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.
Terms on this page (8), plain-language definitions
- Host (matrix)
- Majority element/phase whose lattice dominates the material.
- Precipitate
- Second-phase particle that forms (often on aging) and blocks dislocations.
- FCC
- Face-centered cubic — many slip systems; Al, Cu, Ni typically ductile.
- Dopant
- Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
- Dislocation
- Line defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries.
- Work hardening
- Strength rise from cold deformation via dislocation multiplication/tangling.
- Solute
- Intentional minority species dissolved in the host (alloying addition).
- Vacancy
- Point defect: a missing atom site in the lattice.
Definitions quoted from the Chem for linguists primer glossary.
Materials first. The cross-domain peg stays last, and it stays SPECULATIVE.
Date: 2026-09-19
Audience: syntax/semantics readers building alloy-design literacy (Chem for linguists)
Purpose: Execute an Al–Li (aluminum–lithium) aerospace-alloy hostMajority element/phase whose lattice dominates the material. walkthrough with the same checklist discipline as Al–Mg (Al–Mg SSS contrast) and Ni–γ′ (wanted-precipitateSecond-phase particle that forms (often on aging) and blocks dislocations. cousin). Materials first; density / modulus / precipitation windows as the real design meters.
Locks: Bridge A locked as SPECULATIVE supporting case only (pedagogy after materials). Materials facts first; linguistic parallels only in a flagged box. No joint-field claim. Dowty / Triskelion / Merge·Agree / kanji / Navajo θ-typing not advanced here.
Companion notes: Al–Mg (AA5083 Al–Mg SSS foil); Ni–γ′ (intentional precipitation window); Mechanism taxonomy (Family 4 precipitation); Doping vs alloying vocabulary (Path D — alloying / precipitation, not dilute electronic doping); Conclusions; Chem for linguists §4–§8; Solubility windows; Process metastability.
- 0. Design brief (problem-driven)
- 1. Chem-for-linguists checklist (§8) — filled (Al–Li edition)
- 2. Why Li in Al — density, stiffness, precipitation (REAL materials)
- 3. Goals — lightweight airframe / tankage and the trade space
- 4. Windows — Li / Cu / Mg / Zr / Sc; quench; overaging; δ′ coarsening
- 5. What “over” means — not one physics
- 6. Vocabulary hygiene
- 7. Bridge A add-on checklist (depth note §6) — filled
- 8. Under / useful / over — materials only (no linguistics yet)
- 9. SPECULATIVE Bridge A overlay (supporting only)
- 10. Contrast table — Al–Li vs Al–Mg vs Ni–γ′
- 11. What this walkthrough trains you to do next
- 12. Sources consulted (2026-09-19 note)
0. Design brief (problem-driven)
| Slot | Choice |
|---|---|
| Host | Aluminum (FCCFace-centered cubic — many slip systems; Al, Cu, Ni typically ductile. α) |
| Candidate alloy family | Al–Li / Al–Cu–Li aerospace alloys — classic 2090-class through modern 2099 / 2195 / 2050-class plate/extrusion/sheet |
| Named weakness of pure / conventional Al | Soft when annealed; density of conventional Al (~2.70 g cm⁻³) and modulus (~70 GPa) leave airframe / tankage weight and stiffness on the table vs redesign with denser Ti or composites |
| Intended mechanism | Precipitation hardening (age hardening) by controlled δ′ Al₃Li and/or plate-like T₁ Al₂CuLi (plus θ′-type / S' depending on Cu–Mg), plus Li-driven density↓ and E↑. Not AA5083-style SSS-only; not semiconductor electronic doping |
| Service hint | Lightweight airframe structure, cryogenic tankage (e.g. 2195-class), medium–thick plate (2050-class); strength–toughness–corrosion–anisotropy tradeoffs |
Vocabulary lock: Prefer alloying / Al–Li alloy / precipitation hardening / Li addition. Do not call ~1–2+ wt% Li “doped aluminum.” Reserve dopantIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase. for dilute electronic (etc.) intent. See §6 and Path D note.
Hard contrast to prior checklists: - vs Al–Mg AA5083: same FCC Al host, but Al–Mg headlines SSS + unwanted β; Al–Li headlines intentional precipitates (δ′ / T₁) as the strength win — closer to Ni–γ′ pedagogy than to sensitization-first Al–Mg. - vs Ni–γ′: both are wanted-precipitate windows; Al–Li adds density and modulus as first-class meters and brings aerospace-specific anisotropy / SCC / melt Li-loss failure modes. - vs Si:P / GaN:Mg: mechanical / aerospace property window, not carrier density.
1. Chem-for-linguists checklist (§8) — filled (Al–Li edition)
1. What is the inherent weakness of the pure / base form?
- Pure / dilute Al is soft (easy FCC slip) and relatively low specific stiffness for weight-critical aerospace.
- Conventional high-strength Al–Cu / Al–Zn–Mg–Cu grades deliver strength but not the density cut Li uniquely buys among common Al alloying elements.
- Design goal: raise specific strength and specific modulus (E/ρ) while keeping toughness, corrosion, and processability inside aerospace allowables.
2. Which obstacle mechanism is doing the work?
| Regime | Mechanism (name it) |
|---|---|
| Density / modulus | Li in solution and in precipitates: ~3% density drop per 1 wt% Li; Young’s modulus rises ~5–6% per 1 wt% Li (order-of-magnitude teaching lore; confirm on the specific temper) |
| High-Li / 2nd-gen class | Coherent ordered δ′ (Al₃Li, L1₂) — shearable; strengthens but promotes planar slip → toughness / anisotropy risk |
| Cu-bearing / 3rd-gen class | Plate-like T₁ (Al₂CuLi) as principal hardener (often with θ′-type Al₂Cu, minor δ′, S'/T₂ depending on Mg–Cu–Li balance); stretch before age nucleates T₁ on dislocationsLine defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries. |
| Dispersoids / recrystallization control | β′ Al₃Zr (and/or Al₃Sc / Al₃(Sc,Zr)) — grain/texture control, not the primary strength story |
| Concurrent | Some SSS from Cu/Mg/Li still dissolved; work hardeningStrength rise from cold deformation via dislocation multiplication/tangling. from stretch (T8-class) |
Explicitly not: Mott-style electronic doping; calling Li a “dopant.”
3. What trade-offs are accepted?
- More Li ↑ density benefit and δ′ volume ↔ planar slip, lower toughness, thermal instability (δ′ coarsening), melt handling pain.
- Cu ↑ enables T₁ strength ↔ quench sensitivity, corrosion / SCC nuance, weld HAZ precipitate damage.
- Stretch (cold work) before age ↑ T₁ density ↔ residual stress / formability limits; through-thickness quench gradients in thick plate.
- Zr/Sc ↑ recrystallization resistance ↔ cost; Sc is expensive; over-refinement is not free.
- Aerospace win (lighter structure) ↔ anisotropy, SCC, fusion-weld Li loss / porosity, and temper-window discipline.
4. How critical is processing vs nominal composition?
First-class — three clocks. Composition sets Li/Cu/Mg solvus ceilings and which precipitate family dominates. Solution T + quench rate + stretch + age T–time decide whether you get fine intragranular T₁/δ′ or coarse quench-induced plates, GB films, and PFZs. Service T–time then drives overaging / δ′ coarsening. Melt practice (cover / vacuum / flux) decides whether Li stays in the metal or burns/oxidizes out. Composition alone does not “use up” the window.
5. Problem-driven or exploratory?
Problem-driven: cut airframe/tankage mass and raise specific stiffness vs incumbent Al (and sometimes vs composites on cost/formability), then stay inside toughness–corrosion–anisotropy allowables that killed many 2nd-generation deployments.
2. Why Li in Al — density, stiffness, precipitation (REAL materials)
2.1 Density and modulus rules of thumb
| Fact | Approximate figure | Role |
|---|---|---|
| Li density | ~0.53–0.54 g cm⁻³ (lightest metal) | Unique density lever in Al |
| Al density baseline | ~2.70 g cm⁻³ | Host |
| Density drop | ~3% per 1 wt% Li (also cited ≈0.08 g cm⁻³ per 1 wt% Li) | Primary lightweighting meter |
| Young’s modulus rise | ~5–6% per 1 wt% Li (also ≈+3 GPa per 1 wt% Li in some handbooks) | Specific stiffness E/ρ |
| Max Li solubility lore | Terminal solubility ~~4 wt% Li near eutectic T (~600 °C class); engineering alloys use far less | Solvus ceiling ≠ useful product window |
| 2nd-gen density win | High-Li chemistries (Li often >2 wt%) claimed ~7–10% density benefit vs baseline strength peers | Commercial disappointment from toughness/anisotropy/corrosion |
| 3rd-gen Li band | Often ~0.75–1.7 wt% Li (Rioja / Williams lineage; alloy-specific) | Trade density for property balance |
Pedagogy sentence: Li is in Al first for mass and stiffness, and second as a precipitation participant — not as an electronic dopant.
Sources (headline): Rioja & Liu / Rioja & Williams Metall. Mater. Trans. Al–Li evolution reviews; Lequeu et al. on 2050 plate; IOP/open Al–Cu–Li T₁ papers repeating the 3% / 5–6% lore; Total Materia / handbook density–modulus summaries.
2.2 Precipitate cast (name the phases)
| Phase | Rough stoichiometry / structure | When it dominates | Design note |
|---|---|---|---|
| δ′ | Al₃Li, L1₂, coherent spheres | High-Li / low-Cu paths; also present in many Al–Cu–Li tempers | Shearable → planar slip; coarsens on overage; thermal-stability risk |
| T₁ | Al₂CuLi, plate-like on {111} | Cu-bearing 3rd-gen (2099 / 2195 / 2050 class) | Often principal strength; nucleates on dislocations → stretch helps |
| θ′ / θ-type | ~Al₂Cu family | Low-Li / high-Cu corners | Concurrent hardener; not the Li density story |
| S′ / T₂ / TB… | Al–Cu–Mg–Li equilibrium zoo | Overage / GB / wrong balance | Toughness / corrosion / thermal-stability spoilers |
| β′ Al₃Zr (dispersoid) | L1₂ coherent dispersoids | Almost all modern Al–Li | Recrystallization / texture control |
| Al₃Sc / Al₃(Sc,Zr) | Dispersoids | Sc-bearing variants | Grain refinement; thermal stability; cost |
Generation sketch (teach once): - 1st/2nd generation (e.g. 2090, 8090/8091-class): higher Li; δ′-heavy; density win; limited commercial success — anisotropy, low toughness, corrosion/thermal issues. - 3rd generation (e.g. 2099, 2195, 2050): lower Li, Cu-forward, T₁-first; better damage-tolerance / corrosion balance for airframe and tankage.
2.3 Classic / modern grade pegs (+ Al–Mg foil)
| Grade / class | Role in this checklist | Contrast |
|---|---|---|
| AA2090 | Classic Cu–Li–Zr plate/sheet; δ′+T₁ story; cryogenic fame; anisotropy / vintage TMP lessons | Early aerospace Al–Li peg |
| AA2099 | Modern extrusion/plate Al–Cu–Li–Zn–Mg–Zr; T₁-centered; FSW literature common | 3rd-gen airframe |
| AA2195 | High-strength Al–Cu–Li (Ag/Mg/Zr class); cryogenic tankage / structural fame | Strength + weld/FSW process story |
| AA2050 | Medium–thick plate Al–Cu–Li; designed around T₁; density ~5% below 7050-class lore in product papers | Thick-section quench / toughness balance |
| AA5083 (foil) | Al–Mg SSS; β unwanted; marine sensitization | Same Al host, different mechanism family — soluteIntentional minority species dissolved in the host (alloying addition). not precipitation |
3. Goals — lightweight airframe / tankage and the trade space
| Goal | Useful regime (materials) | Mechanism to name |
|---|---|---|
| Lightweighting | Enough Li for density target without returning to 2nd-gen δ′-dominated toughness failure | Density rule of thumb + precipitate family choice |
| Specific stiffness | Li elevates E while cutting ρ | Modulus lore + texture (E is anisotropic in wrought product) |
| Strength | Fine intragranular T₁ (stretch-aged) and/or controlled δ′ | Precipitation hardening; cutting → Orowan as plates coarsen |
| Toughness / damage tolerance | Avoid continuous GB films, coarse δ′, planar-slip localization; control texture | Microstructure + TMP, not “more Li” |
| Corrosion / SCC | Temper that breaks continuous anodic GB paths; Zn in some 3rd-gen for corrosion | Electrochemical phase contrast (T₁ vs matrix) |
| Welded structure | Prefer FSW over fusion for many Al–Li joints; post-weld age where allowed | Process clock — precipitate dissolve/coarsen in NZ/HAZ |
One-sentence design reading: pick Li% for density/E, pick Cu–Mg–(Ag)–Zr/Sc so the wanted precipitate is T₁ (modern) or a controlled δ′+T₁ mix, then defend that microstructure against quench, overage, anisotropy, SCC, and melt/weld Li loss.
4. Windows — Li / Cu / Mg / Zr / Sc; quench; overaging; δ′ coarsening
4.1 Composition windows (order-of-magnitude pedagogy)
| Lever | Typical teaching band | What it buys | Past the window |
|---|---|---|---|
| Li | 3rd-gen often ~0.8–1.8 wt%; 2nd-gen often >2 wt% | Density, E, δ′/T₁ participation | δ′-dominated planar slip; toughness↓; melt loss↑ |
| Cu | Often ~2–4+ wt% in Cu–Li grades | Enables T₁; strength | Quench sensitivity; corrosion; coarse θ/T₂ if mismanaged |
| Mg | Minor–moderate (alloy-specific) | SSS + S'/T₁ assistance; density | GB phases / corrosion if wrong |
| Zr | ~0.08–0.16 wt% class | Al₃Zr dispersoids; unrecrystallized structures | Excess constituents / cost of poor cast practice |
| Sc | Dilute when used | Al₃Sc / Al₃(Sc,Zr); grain refine; thermal stability | Cost; diminishing returns |
2050 design lore (Lequeu et al.): Li capped to avoid deleterious δ′ for thermal stability; Cu set for T₁ strength while staying workable vs solubility limit — T₁-first, not “max Li.”
4.2 Process windows
| Process choice | Intent | Risk if wrong |
|---|---|---|
| Solution treatment | Dissolve hardening solutes into α | Incipient melting / incomplete dissolve |
| Quench | Freeze supersaturation for later age | Quench sensitivity: slow mid-thickness cool → quench-induced coarse T₁ / property gradients (thick 2195/2050 plate literature) |
| Stretch (T8 path) | Dislocations as T₁ nucleation sites | Residual stress; form limits; uneven stretch → uneven T₁ |
| Artificial age | Peak fine T₁/δ′ distribution | Underage soft; overage coarsens plates/δ′, strength↓, corrosion path changes |
| Service hold | Microstructure should stay near peak | δ′ coarsening / continued precipitation → thermal instability (esp. high-δ′ chemistries) |
Metastability (three clocks): diagram allows α+precipitates; process captures fine T₁/δ′; service can ripen them. Same lesson as Ni–γ′ overaging and Al–Mg sensitization — different phases, same “useful state is not forever.”
5. What “over” means — not one physics
| Overrun mode | What goes wrong | Physics family |
|---|---|---|
| Anisotropy | Strength/toughness/E vary with direction; thick plate through-thickness gradients | Texture + elongated grains + precipitate distribution |
| Low toughness / planar slip | Shearable δ′ → localized slip bands; low-energy fracture | Precipitate shearing / slip planarity (2nd-gen fame) |
| SCC / IGC | Preferential attack along GB precipitates / PFZs; T₁ electrochemical contrast | Corrosion electrochemistry + temper |
| Overaging / δ′ coarsening | Strength↓; thermal instability under warm service | Ostwald ripening / continued precipitation |
| Quench-induced coarse precipitates | Soft or anisotropic mid-thickness | Kinetics during cool (process clock) |
| Li loss / oxidation in melt | Composition drifts; dross; hydrogen porosity risk | Melt metallurgy — Li avidly oxidizes / volatilizes |
| Weld issues | Fusion: Li burn-off, porosity, hot cracking, HAZ overage; FSW: T₁/δ′ dissolve or coarsen in NZ/HAZ → local soft zones | Joining process clock |
Under (for completeness): too little Li → miss density/E target; too little Cu/stretch/age → miss T₁ strength; under-solution → remnant coarse particles.
Honest split: none of this is a Mott MIT, none is AA5083 GB-β as the intended strength story, none is Cu–Ni Nordheim conductivity collapse. Same Bridge A count mnemonic only at the pedagogical layer (§8).
6. Vocabulary hygiene
| Prefer | Avoid for structural Al–Li |
|---|---|
| Alloying / Li addition; precipitation hardening; δ′- or T₁-formers | “Dopant” / “Li-doped Al” (unless a paper’s electronic intent is explicit — rare here) |
| Precipitate volume fraction / size / habit vs solute still dissolved | Collapsing “Li%” into one number without saying dissolved vs in δ′/T₁ |
| 3rd-gen T₁-first vs 2nd-gen δ′-heavy | Treating all “Al–Li” as one microstructure |
| Precipitation hardening ≠ electronic doping | Using “doped” because both put foreign atoms in a host |
Path D pointer: Doping vs alloying vocabulary — Al–Li sits with Family 4 precipitation / alloying, same vocabulary shelf as Ni–γ′, not Si:P / GaN:Mg dopant language.
Key pedagogy sentence: alloying + precipitation — not dilute electronic doping.
7. Bridge A add-on checklist (depth note §6) — filled
-
Where is the solvus / critical boundary at process and service T?
Read Li/Cu solvus ceilings; mark solution T; then read quench rate and age T–time against T₁/δ′ size maps — not only a binary Al–Li line. -
Intended mechanism?
Name it: precipitation hardening (T₁ and/or δ′) plus density/modulus from Li. Do not call structural Al–Li “electronic doping of aluminum.” -
What fails first past the window?
Goal-dependent (§3–§5): anisotropy, toughness (planar slip), SCC, overaging/δ′ coarsening, quench gradients, melt Li loss, weld HAZ soft zones — pick the failure that matches the named goal. -
Metastability?
Yes — central for the useful fine precipitate state. Aging builds it; service and weld thermal cycles relax it. -
Only then — SPECULATIVE Bridge A mnemonic
See §8. Never invert: do not pick Li% or age T from a linguistic arity table.
8. Under / useful / over — materials only (no linguistics yet)
| Zone | Al–Li aerospace reading (airframe / tankage framing) |
|---|---|
| Under | Too little Li (miss density/E) and/or under-Cu / under-stretch / under-age (miss T₁ strength) |
| Useful window | Goal-relative: 3rd-gen Li band + Cu for T₁ + Zr(/Sc) dispersoids + solution→quench→stretch→age that yields fine intragranular T₁, acceptable toughness/corrosion, controlled texture |
| Over / wrong regime | 2nd-gen-style δ′ overload (toughness/anisotropy); overaged coarse T₁/δ′; quench-induced coarse plates; SCC-prone GB films; melt Li burn-off; fusion-weld damage |
SPECULATIVE Cross-domain section. Open after the materials.
9. SPECULATIVE Bridge A overlay (supporting only)
Everything in this section is pedagogical analogy. It does not make doping × θ-roles a joint field.
| Materials fact | SPECULATIVE Bridge A reading |
|---|---|
| Useful Li–Cu–(Mg)–Zr window + age/stretch schedule for a named aerospace duty | Successful “saturation” of the design configuration |
| Under-Li soft/heavy Al or under-aged soft α | Under-filling relative to the intended property configuration |
| δ′-driven toughness collapse / overaging / SCC / quench coarse plates | Overrun: chemistry may still “fit” a phase field, but leaves the useful property cast |
| Continuous wt% + continuous T–time–quench–stretch | Same asymmetry as prior hosts: composition is continuous; verb arity is typically discrete — do not force integer slots onto Li% or f_T₁ |
| Multiple distinct “over” physics | Bridge A’s count ladder is a memory peg; Al–Li trains that “over” includes precipitate family choice, ripening, anisotropy, and process/melt clocks — not one solvus corrosion story |
Earn: expands the Al host set from SSS-only (5083) to intentional precipitation + density/modulus aerospace design; pairs cleanly with Ni–γ′ wanted-precipitate pedagogy.
Collapse: if T₁ cutting is equated with θ-saturation; if Li% is read off an arity table; if “doped Al–Li” vocabulary smuggles electronic-doping metaphors; if Navajo morphological typing is treated as evidence for this count story (typing stays parallel).
Explicit asymmetries (keep on the whiteboard): - Linguistics: often categorical well-formedness; Al–Li: graded optima + TMP + three clocks. - Continuous composition / fraction ≠ discrete lexical arity. - Precipitate “participants” are not θ-role fillers — metaphor only.
10. Contrast table — Al–Li vs Al–Mg vs Ni–γ′
| Al–Li (this note) | Al–Mg AA5083 | Ni–γ′ | |
|---|---|---|---|
| Solute / phase role | Li (+Cu…) → wanted δ′/T₁ precipitates + density/E | Substitutional Mg SSS; β unwanted | Substitutional γ′-formers → ordered precipitate |
| Diagram family | Al–Li / Al–Cu–Li solvus + precipitate zoo | Limited solubility; solvus + β | γ / γ′ solvus; f_γ′(T) |
| Headline “window” metric | Li% (ρ, E) + T₁/δ′ size–fraction + TMP | Solvus + service T–time + DoS | γ′ size + fraction + solvus-relative HT |
| First “over” (typical) | Anisotropy / toughness / SCC / overage / Li melt loss | GB β sensitization (IGC) | Overaging / TCP / excess f_γ′ |
| Useful second phase? | Yes — T₁ (modern) / controlled δ′ | No — β is failure mode | Yes — γ′ |
| Metastability of useful state | Central (fine T₁/δ′; service/weld coarsening) | Useful Mg SSS often supersaturated | Central (fine γ′; rafting/TCP) |
| Vocabulary | Alloying / precipitation; avoid “dopant” | Solute; avoid “doped Al” | γ′-formers / alloying; avoid “dopant” |
| Bridge A second-phase peg | Strong (wanted T₁ vs wrong GB/coarse phases) | Strong (unwanted β) | Strong (wanted γ′ vs TCP) |
Pedagogy takeaway: Al–Mg and Al–Li share an FCC Al host but split mechanism families (SSS vs precipitation). Al–Li and Ni–γ′ share wanted-precipitate pedagogy but different meters (aerospace ρ/E/anisotropy/SCC vs creep/TCP/oxidation).
11. What this walkthrough trains you to do next
For any new host/solute pair:
- Classify whether the useful obstacle is dissolved solute, intentional precipitate, or transformation product.
- Open / sketch the relevant diagram; mark solvus and process vs service T.
- Name the mechanism (SSS / T₁–δ′ precipitation / γ′ / electronic doping / …).
- Name the metric that defines the useful window (ρ+E+f_T₁ vs DoS vs conductivity vs hardenability).
- Name the first failure past that window — expect plural modes in Al–Li.
- Ask whether the useful state is metastable (yes for fine T₁/δ′).
- Audit vocabulary (Path D): alloying/precipitation ≠ dopant.
- Only then, if useful for memory, hang the SPECULATIVE Bridge A count peg.
Stacked with Al–Mg and Ni–γ′: you now have an Al-host SSS foil, an Al-host precipitation aerospace peg, and a Ni-host precipitation creep peg — without claiming any is linguistics.
12. Sources consulted (2026-09-19 note)
| Source | Role |
|---|---|
| Rioja & Williams / Rioja & Liu Al–Li evolution reviews (Metall. Mater. Trans. lineage; open PDF digests) | REAL: 2nd vs 3rd gen; Li bands; T₁/δ′/θ′; Zr/Mn/Zn roles; aerospace product history |
| Lequeu et al. — AA2050 medium–thick plate (J. Mater. Eng. Perform. lineage) | T₁-first design; Li cap vs δ′; density vs 7050 lore; anisotropy/toughness motivation |
| Open Al–Cu–Li T₁ characterisation papers (e.g. IOP Conf. Ser. 2099-T83; Materials IGC/T₁ temper studies) | T₁ as principal hardener; stretch nucleation; corrosion vs GB T₁ morphology |
| Quench-sensitivity / thick-plate anisotropy literature (e.g. 2195 / 2297 through-thickness studies; arXiv digests) | Process-clock quench-induced T₁; texture gradients |
| Multicomponent Al–Li aging reviews (e.g. PMC9231015 lineage) | δ′ on quench; vacancyPoint defect: a missing atom site in the lattice.–Li binding; overaging / thermal stability |
| FSW Al–Li joint papers (2099 / 2195) | Weld clock: T₁/δ′ dissolve or coarsen; FSW preferred vs fusion Li loss |
| Sc/Zr dispersoid papers in Al–Li–Cu | Al₃(Sc,Zr) grain refine / recrystallization control |
| Handbook / Total Materia density–modulus lore; binary Al–Li solubility digests | ~3% ρ↓ and ~5–6% E↑ per 1 wt% Li; ~4 wt% max solubility lore |
| Project-internal: Al–Mg + Ni–γ′ checklists; Mechanism taxonomy; Doping vs alloying vocabulary; Chem for linguists §4–§8; CONCLUSIONS-v1-addendum | Stack consistency; Path D vocabulary; Bridge A lock |
v0 — 2026-09-19 continue-research. Real metallurgy walkthrough; Bridge A flagged SPECULATIVE. No joint field.
Corpus note: worked-al-li-host-checklist-v0.md. Materials first; Bridge A peg last.