Worked walkthrough — Cantor alloy CoCrFeMnNi (HEA / MPEA framing) through the alloy-design checklist
- 1 Diagram
- 2 Mechanism
- 3 Failure past the window
- 4 Metastability
- 5 SPECULATIVE Bridge A peg
What’s claimed and how well supported
- Labels on this page
- REAL ×2 SPECULATIVE ×15
- Strongest label used
- REAL
- Main caveat (quoted)
- Locks: Bridge A locked as ◆ SPECULATIVE supporting case only (pedagogy after materials).
Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.
Terms on this page (11), plain-language definitions
- Host (matrix)
- Majority element/phase whose lattice dominates the material.
- FCC
- Face-centered cubic — many slip systems; Al, Cu, Ni typically ductile.
- Solid solution
- Solute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase.
- HCP
- Hexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.
- Dopant
- Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
- Solute
- Intentional minority species dissolved in the host (alloying addition).
- Work hardening
- Strength rise from cold deformation via dislocation multiplication/tangling.
- Dislocation
- Line defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries.
- Precipitate
- Second-phase particle that forms (often on aging) and blocks dislocations.
- BCC
- Body-centered cubic — Fe/steel common; plasticity more temperature-sensitive.
- Valency (ling.)
- Arity: how many actants a predicate takes; formal vs semantic valency can diverge.
Definitions quoted from the Chem for linguists primer glossary.
Materials first. The cross-domain peg stays last, and it stays SPECULATIVE.
Date: 2026-09-19
Audience: syntax/semantics readers building alloy-design literacy (Chem for linguists)
Purpose: Execute a Cantor alloy (equiatomic CoCrFeMnNi) hostMajority element/phase whose lattice dominates the material. walkthrough that grounds Triskelion Prayerant Layer A metallurgy anchors — FCCFace-centered cubic — many slip systems; Al, Cu, Ni typically ductile. HEA, cryogenic twinning / TWIP-like plasticity, triple junctions, GBE — without promoting Layer C ditransitive ↔ microstructure mappings. Same checklist discipline as Fe–C / Ni–γ′ / metal SSS hosts.
Locks: Bridge A locked as SPECULATIVE supporting case only (pedagogy after materials). Materials facts first; linguistic parallels only in a flagged box. No joint-field claim. Triskelion Prayerant ditransitive ↔ triple-junction mapping remains SPECULATIVE / parked (see §9–§10). Dowty / Merge·Agree / kanji / Navajo θ-typing not advanced here.
Companion notes: secondary index (Layer A only — A1 Cantor, A2 triple junctions, A3 TWIP/TRIP, A4 GBE); Conclusions; Mechanism taxonomy; Ni–γ′; Fe–C; Chem for linguists §5–§8; Solubility windows; Process metastability.
- 0. Design brief (problem-driven)
- 1. Chem-for-linguists checklist (§8) — filled (Cantor / HEA edition)
- 2. What Cantor / HEA is (REAL materials)
- 3. Goal-dependent windows — name the mechanisms
- 4. What “over” / “off-window” means — not one physics
- 5. Metastability / kinetics — first-class
- 6. Vocabulary hygiene — “doping” vs multi-principal composition
- 7. REAL microstructure anchors (Triskelion Layer A — no θ-roles)
- 8. Bridge A add-on checklist — filled carefully
- 9. Under / useful / over — materials only (no linguistics yet)
- 10. SPECULATIVE Bridge A overlay (supporting only) + Triskelion park
- 11. Contrast table — Cantor vs prior REAL pegs
- 12. What this walkthrough trains you to do next
- 13. Sources consulted (2026-09-19 note)
0. Design brief (problem-driven)
| Slot | Choice |
|---|---|
| Host / alloy | Equiatomic CoCrFeMnNi — the Cantor alloy (Cantor et al. 2004 lineage; also written CrMnFeCoNi) |
| Framing class | HEA (high-entropy alloy) / MPEA (multi-principal-element alloy) / sometimes CCA (complex concentrated alloy) — not a dilute-doped base metal |
| Named “weakness” of single-principal metals (contrast) | Classic one-principal alloys often face a strength–ductility trade-off; many structural metals lose toughness as T falls. Cantor is famous for the opposite trend toward cryogenic T |
| Intended mechanism | Concentrated multi-principal FCC solid solutionSolute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase. + low stacking-fault energy (SFE) → planar slip → deformation nanotwinning (TWIP-like) at high stress / low T; optional TRIP-like FCC→HCPHexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic. pathways in related non-equiatomic / metastability-engineered compositions or at extreme cryogenic T |
| Service hint | Cryogenic structural / damage-tolerant applications (LNG, space, high-field magnets class of duty); research benchmark for HEA toughness |
Vocabulary lock (critical for this note): Prefer alloying / MPEA / HEA / concentrated solid solution. Do not call equiatomic Cantor “doped Co” or “doped Ni.” Reserve dopantIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase. for dilute electronic (etc.) intent. When papers say “doped Cantor” they usually mean a minor fourth/sixth addition (C, Al, N, …) to a multi-principal base — still not Si:P-style doping. See §6.
Hard contrast to prior checklists: Al–Mg / Cu–Ni / Fe–C / Ni–γ′ are one-principal hosts with minority solutesIntentional minority species dissolved in the host (alloying addition). or formers. Cantor has five principals at ~20 at.% each — no single “host lattice owner.” Bridge A’s binary solvus window metaphor is riskier here (§9).
Triskelion Layer A earn (from refinement note): Cantor as a concrete place where triple junctions / twin nucleation / GB networks matter.
Collapse: claiming Prayerant Give/Lead modes are observed Cantor mechanisms — parked.
1. Chem-for-linguists checklist (§8) — filled (Cantor / HEA edition)
1. What is the inherent weakness of the pure / base form?
- There is no single pure base in the Cantor sense. Pedagogy contrast: annealed single-principal FCC metals (pure Ni, pure Cu) are soft; many cryogenic steels trade toughness for strength.
- Fully recrystallized equiatomic Cantor at RT can have relatively modest yield — property fame is not “always stronger than everything,” but strength + ductility + toughness that improve together toward cryogenic T.
- Design goal: sustain work hardeningStrength rise from cold deformation via dislocation multiplication/tangling. to large strain (delay necking) while keeping toughness high as T drops.
2. Which obstacle / plasticity mechanism is doing the work?
| Regime | Mechanism (name it) |
|---|---|
| Low strain / RT | Planar dislocationLine defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries. slip on {111}⟨110⟩; Shockley partials + stacking faults; high lattice friction from concentrated multi-element environment |
| Higher strain and/or cryogenic T | Deformation nanotwinning (TWIP-like) — twins refine effective mean free path → sustained strain hardening |
| Extreme cryogenic (e.g. ~20 K class) / metastability-tuned relatives | Progressive synergy: SF → nanotwins → limited FCC→HCP (ε) transformation (TRIP-like) in some CrCoNi-family reports |
| Microstructure levers | Grain refinement (Hall–Petch); annealing-twin / Σ3 fraction; GBE; optional precipitatesSecond-phase particle that forms (often on aging) and blocks dislocations. in modified Cantor (not required for classic single-phase fame) |
Explicitly not: Mott-style electronic doping; Labusch dilute SSS as the whole story (concentrated SSS + twinning synergy is the headline); Prayerant mode toggles.
3. What trade-offs are accepted?
- Equiatomic single-phase FCC → excellent toughness/ductility, but RT yield often needs grain refinement, work hardening, or non-equiatomic TWIP/TRIP tuning to raise strength.
- Mn helps SFE / twinning story ↔ hurts high-T oxidation (fast Mn oxide growth).
- Long intermediate-T anneals can nucleate Cr-rich GB secondary phases (σ-family / Cr-rich precipitates) — single-phase is not forever.
- Composition deviations (Al, C, Cu, …) can raise strength via second phases or SFE change ↔ risk embrittlement / dual-phase complexity.
4. How critical is processing vs nominal composition?
First-class. Same equiatomic chemistry can be soft recrystallized FCC or high-strength work-hardened / nanotwin-engineered material depending on thermomechanical path (cold work, anneal T/time, grain size, twin density). Oxidation and GB precipitation are process/service-clock failures, not “more Mn% = always better.”
5. Problem-driven or exploratory?
Both historically. Cantor/Yeh 2004 opened an exploratory multi-principal design space; the cryogenic toughness result (Gludovatz et al. lineage) made Cantor a problem-driven damage-tolerance benchmark. This checklist treats it as a REAL Layer A peg for literacy — not as proof of linguistic alloy ontology.
2. What Cantor / HEA is (REAL materials)
2.1 Identity card
| Fact | Approximate figure / lore | Role |
|---|---|---|
| Composition | Equiatomic CoCrFeMnNi (~20 at.% each) | Five principals; no dilute dopant |
| Structure (as-processed / typical) | Single-phase FCC solid solution | Famous “unexpected” single phase vs brittle intermetallics |
| Origin | Cantor et al. 2004; Yeh “HEA” framing concurrent | HEA field anchor |
| Long-hold caveat | Prolonged anneals (e.g. hundreds of days ~500–700 °C class) can form GB Cr-rich precipitates / multi-phase states | Single-phase ≠ eternal equilibrium |
| Related MEAs | CrCoNi, CrFeCoNi — often even tougher at cryogenic T | Number of elements ≠ automatic property win |
| SFE (order) | ~20–30 mJ m⁻² class (composition- and SRO-sensitive) | Enables planar slip + twinning |
HEA vs MPEA vs CCA (vocabulary):
- HEA: common label; historically tied to high configurational entropy stabilizing single-phase SSS — useful brand, not a universal law (Otto et al.: swapping elements at same entropy does not guarantee single phase).
- MPEA: broader, less entropy-dependent — preferred when teaching “many principals, not dilute doping.”
- CCA: complex concentrated alloys — umbrella for multi-phase concentrated designs.
- MEA: 3–4 principals (e.g. CrCoNi).
2.2 Cryogenic toughness / strength–ductility synergy (headline properties)
| Metric (class figures; process-dependent) | RT class | Cryogenic class |
|---|---|---|
| Yield / UTS | Modest YS when fully recrystallized; UTS can still be high with work hardening | YS and UTS rise (e.g. YS ~800 MPa class, UTS ≳1 GPa at 77 K in Gludovatz-lineage reports) |
| Tensile ductility | Already high (~50–70% class) | Often maintained or improved |
| Fracture toughness | Exceptional (KJIc ≳ 200 MPa·m½ class) | Remains exceptional; at 20 K, Cantor KJIc ~262 and CrCoNi ~459 MPa·m½ (Liu/Ritchie Science 2022 lineage) |
| Twin onset strain (Laplanche / Keli lineage) | Nanotwins after ~~25% plastic strain at 293 K | Onset ~~8% at 77 K; critical twinning stress ~~750 MPa (≈ temperature-insensitive) |
Pedagogy sentence: Unlike many alloys where toughness falls as strength rises at low T, Cantor-family FCC HEAs can show strength and toughness rising together — driven by sustained hardening from planar slip + nanotwinning (+ optional TRIP-like features at extreme T).
Sources (headline): Gludovatz et al. Science 2014 (cryogenic toughness); Zhang et al. Nat. Commun. 2015 (nanoscale damage-tolerance mechanisms); Laplanche et al. Acta Mater. 2016 + Keli et al. Intermetallics 2019 (twin onset); Liu et al. Science 2022 (20 K toughness; CrCoNi vs Cantor); Li/Zhao/Ritchie/Meyers Prog. Mater. Sci. 2019 review; Jiang et al. cMat 2025 cryogenic HEA review.
3. Goal-dependent windows — name the mechanisms
“Useful window” is not one binary solvus number. Name the goal first:
| Goal | Useful regime (materials) | Mechanism to name |
|---|---|---|
| Cryogenic toughness | Single-phase (or controlled dual-phase) FCC; grain size + twin propensity tuned; avoid brittle GB films | Planar slip + nanotwinning; crack-tip twin bridging / intrinsic toughening |
| RT strength–ductility | Fine grains / gradient / hierarchical twins; optional minor C/Al additions | Hall–Petch + twinning engineering; not “more entropy” alone |
| Oxidation / hot gas | Often lower Mn, higher Cr Cantor-derived chemistries | Mn-oxide kinetics dominate equiatomic Cantor — composition deviation is the window |
| Phase stability (long hold) | Avoid long dwells in Cr-precipitation nose; or accept/design dual-phase | GB Cr-rich / σ-family risk |
| Metastability TWIP/TRIP design | Non-equiatomic SFE tuning (e.g. Fe–Mn–Co–Cr TRIP-DP “high-entropy steels”) | Controlled FCC↔HCP; related family, not identical to equiatomic Cantor RT behavior |
4. What “over” / “off-window” means — not one physics
Carry prior hosts’ lesson: “too much” is goal-dependent. For Cantor / MPEA space:
| Overrun / miss mode | What goes wrong | Physics family |
|---|---|---|
| Composition deviation → unwanted second phases | Al / Cr overload → BCCBody-centered cubic — Fe/steel common; plasticity more temperature-sensitive. / σ / intermetallics; C → M23C6 embrittlement | Phase stability in multi-component space |
| Mn-driven oxidation | Fast Mn oxide / spinel; Mn depletion; Kirkendall voids; interrupted chromia | High-T environmental failure (equiatomic Cantor is a poor superalloy substitute without Mn↓/Cr↑) |
| Long anneal GB precipitation | Cr-rich GB particles after prolonged intermediate T | Kinetics / service-clock (Otto-lineage decomposition) |
| Soft recrystallized RT yield | Miss structural strength target if no grain/twin engineering | Process miss — “under” on strength axis, not over-doping |
| Wrong SFE (too high) | Twin delayed; lose cryogenic synergy | Stacking-fault / twinning-stress window |
| Wrong SFE / metastability (too low, uncontrolled) | Excess martensite / brittle products in some TRIP designs | Transformation overrun (cousin of Fe–C quench miss) |
Honest split: none of these is Mott MIT, AA5083 GB-β sensitization as the intended strength story, Cu–Ni Nordheim collapse, or Ni–γ′ TCP from refractory overload — though wrong second phases rhyme with Ni–γ′ TCP / Fe–C cementite-network lessons at the pedagogical layer only.
5. Metastability / kinetics — first-class
| Clock | Cantor reading |
|---|---|
| Equilibrium / CALPHAD | Equiatomic FCC often metastable or slowly decomposing at intermediate T; multi-component phase space is not a binary solvus line |
| Process path | Melt → homogenize → cold work → recrystallize sets grain size, annealing-twin density, residual dislocations |
| Deformation metastability | Stress/strain + low T activate twins (and sometimes ε-HCP); twinning stress ~constant, slip stress rises as T falls → twins earlier at cryogenic T |
| Service / oxidation clock | Mn oxidation and subsurface depletion evolve with T–time in air |
Three clocks (Process metastability) still apply — name which clock before hanging under/useful/over.
6. Vocabulary hygiene — “doping” vs multi-principal composition
| Prefer | Avoid for equiatomic Cantor |
|---|---|
| HEA / MPEA / CCA; multi-principal; concentrated solid solution | “Doped cobalt” / “doped nickel” / “five dopants in a host” |
| Alloying addition for minor C, Al, N, Ti into Cantor | Calling the five principals “dopants” |
| TWIP-like / deformation nanotwinning; TRIP-like when FCC→HCP is evidenced | Equating Prayerant “Lead mode” with twinning |
| Triple junction / GB character / Σ3 fraction as microstructure metrics | “θ-role at the junction” as metallurgy |
| Solute / SSS when discussing dilute additions to a Cantor base | Semiconductor dopant language for mechanical HEAs |
Mechanism-taxonomy placement: Cantor headline sits closest to Family 3 (concentrated SSS) + deformation twinning / transformation plasticity (TWIP/TRIP cousins of Fe–Mn steels) — not Family 1 electronic doping. Minor interstitial C in Cantor-derived MPEAs is still alloying, not Si:P doping.
Key pedagogy sentence: Multi-principal composition ≠ dilute doping. Equal ~20 at.% partners are co-principals, not foreigners saturating a host the way P saturates Si.
7. REAL microstructure anchors (Triskelion Layer A — no θ-roles)
These are the Bible’s honest metallurgy pegs. They do not entail ditransitive grammar.
7.1 Triple junctions — REAL geometry
- Where three grains and three GB segments meet. Ubiquitous in polycrystals; measurable by EBSD.
- Twin nucleation, crack-path selection, and boundary-network topology often involve junctions (stress concentration, competing GB choices).
- Earn: arity-3 meeting-point geometry as a visual motif.
- Collapse if: “triple junction is a ditransitive verb” stated as metallurgy — SPECULATIVE / parked (§10).
7.2 Grain-boundary engineering (GBE) — REAL practice
- Thermomechanical processing to raise fractions of special / CSL boundaries (esp. Σ3 annealing twins) and improve boundary-network connectivity.
- Closest real materials practice to “engineering the junction network.”
- Still without Agent/Theme/Recipient stickers.
7.3 TWIP / TRIP — REAL mechanisms (Layer A3)
| Acronym | Meaning | Rough effect in Cantor family |
|---|---|---|
| TWIP | Twinning-Induced Plasticity | Nanotwins → dynamic Hall–Petch → sustained hardening + ductility |
| TRIP | Transformation-Induced Plasticity | Stress/strain-induced FCC→HCP (ε) in some related / extreme-T cases |
Classic in high-Mn steels; engineered into medium-/high-entropy alloys via SFE / metastability control.
8. Bridge A add-on checklist — filled carefully
-
Where is the critical boundary?
Not a simple binary solvus. Read: (a) single-phase FCC vs second-phase fields in multi-component space; (b) twinning-stress vs flow-stress crossover; (c) oxidation / Mn-depletion envelopes; (d) long-anneal GB precipitation noses. -
Intended mechanism?
Concentrated FCC SSS + planar slip + nanotwinning (± TRIP-like). Not electronic doping of a host. -
What fails first past the window?
Goal-dependent (§4): oxidation (Mn), GB Cr-rich phases, unwanted BCC/σ from Al/Cr, soft recrystallized yield, uncontrolled martensite in TRIP designs. -
Metastability?
Yes — central for deformation twinning/TRIP and for phase stability under long holds / oxidation. -
Only then — SPECULATIVE Bridge A mnemonic
See §9. Extra caution: continuous multi-component composition space ≠ discrete valencyArity: how many actants a predicate takes; formal vs semantic valency can diverge. slots; arity metaphors are riskier than in binary Al–Mg.
9. Under / useful / over — materials only (no linguistics yet)
| Zone | Cantor / MPEA reading (cryogenic-toughness framing example) |
|---|---|
| Under | Too-coarse grains / insufficient twin propensity / SFE too high → miss hardening synergy; or equiatomic RT yield too low for the structural duty |
| Useful window | Goal-relative: single-phase FCC with process-tuned grain/twin structure for cryogenic toughness; or Mn↓/Cr↑ variants for oxidation; or non-equiatomic TWIP/TRIP for strength |
| Over / wrong regime | Unwanted second phases; Mn-oxidation failure; long-anneal GB films; TRIP products that embrittle; treating “more elements / more entropy” as automatic improvement |
SPECULATIVE Cross-domain section. Open after the materials.
10. SPECULATIVE Bridge A overlay (supporting only) + Triskelion park
Everything in this section is pedagogical analogy. It does not make doping × θ-roles a joint field. It does not promote Triskelion Prayerant ditransitive ↔ triple-junction as metallurgy.
10.1 Bridge A (count / window) — careful fit
| Materials fact | SPECULATIVE Bridge A reading |
|---|---|
| Useful process + composition envelope for a named duty (cryogenic toughness vs oxidation vs TWIP strength) | Successful “saturation” of a design configuration |
| Soft under-processed recrystallized Cantor | Under-filling relative to strength target |
| Second phases / oxidation / GB films past the envelope | Overrun: chemistry may still be “HEA-branded,” but leaves the useful property cast |
| Continuous multi-component composition space | Stronger asymmetry than binary hosts: five continuous at.% axes ≠ discrete lexical arity — do not force integer slots onto Co:Cr:Fe:Mn:Ni ratios |
| Twin onset as stress threshold (~750 MPa) | Count-adjacent threshold intuition — still not θ-saturation |
Earn: trains that Bridge A’s under/useful/over ladder can hang on process + multi-component phase/oxidation/twinning windows, not only binary solvus doping.
Collapse: if Cantor is called “five-dopant saturation”; if entropy is treated as linguistic arity; if continuous MPEA space is read off a valency table.
10.2 Triskelion Prayerant — explicit park
| Mapping | Status |
|---|---|
| Cantor HEA, TWIP/TRIP, GBE, triple junctions as materials facts | REAL (Layer A) |
| Ditransitive / three-argument verbs as linguistics facts | REAL (Layer B) |
| Ditransitive ↔ triple junction as identity or design law | SPECULATIVE / PARKED (Layer C) |
| Agent / Theme / Recipient stickers on grains, twins, or junctions | SPECULATIVE / PARKED |
| Prayerant Give / Lead modes as observed Cantor mechanisms | SPECULATIVE / PARKED — do not promote |
| DTA / “Ditransitive Alloy” as a literature alloy class | CREATIVE naming only — not claimed |
Project one-liner (from triskelion-refinement): Use Layer A for what strengthens; Bridge A for how much is too much (pedagogy); Bible Layer C for three-place geometric imagination — never infer A-facts from C-poetry.
Explicit asymmetries (whiteboard):
- Linguistics: often categorical well-formedness; Cantor: graded optima across composition × process × T.
- Continuous multi-principal space ≠ discrete arity-3.
- Triple junction is geometry, not a θ-grid.
11. Contrast table — Cantor vs prior REAL pegs
| Cantor CoCrFeMnNi (this note) | Ni–γ′ | Fe–C | Al–Mg AA5083 | Si:P (electronic) | |
|---|---|---|---|---|---|
| Design language | MPEA / HEA; multi-principal SSS | γ′-formers / precipitation | Interstitial C + transformation | Substitutional Mg solute | True dopant |
| “Host” | Five co-principals (~20 at.%) | Ni γ matrix | Fe | Al | Si |
| Headline window | Twin/SFE + phase stability + oxidation; process-tuned grains | γ′ size / fγ′ + solvus HT | Quench–temper path | Solvus + sensitization | Carrier density |
| First “over” (typical) | Mn oxidation; GB Cr-rich; unwanted σ/BCC | Overaging / TCP | Brittle M; cementite networks | GB β IGC | Mott / compensation |
| Useful second phase? | Optional (modified Cantor); classic fame is single-phase FCC | Yes — γ′ | Morphology-dependent | No — β unwanted | N/A (carriers) |
| Cryogenic trend | Strength and toughness can rise | Creep-first (hot section) | DBTT concerns in many steels | Not the cryogenic toughness poster child | Device T regimes |
| Bridge A peg | Cautious — multi-component ≠ binary window | Wanted γ′ vs TCP | Transformation / morphology | Solvus overrun | Strongest electronic |
| Vocabulary | Alloying / MPEA — not dopant | Formers — not dopant | Solute — not dopant | Solute — not dopant | Dopant |
Pedagogy takeaway: Cantor trains multi-principal framing, TWIP-like cryogenic synergy, and REAL junction/GBE geometry — while stressing that Triskelion ditransitive mappings stay parked and Bridge A stays SPECULATIVE pedagogy with extra continuity caveats.
12. What this walkthrough trains you to do next
- Ask whether the system is one-principal + solute or multi-principal before saying “doped.”
- Name the plasticity sequence: planar slip → nanotwinning (± TRIP-like).
- Separate composition windows (phase stability, Mn/Cr for oxidation) from process windows (grain size, twin engineering).
- Treat triple junctions / Σ3 networks as measurable microstructure — not θ-roles.
- Hang Bridge A only after materials; refuse integer-arity readings of five-element space.
- Keep Triskelion Layer C generative mappings parked relative to Layer A facts.
13. Sources consulted (2026-09-19 note)
| Source | Role |
|---|---|
| Cantor et al. 2004 multi-component alloy lineage; Yeh HEA framing | REAL: equiatomic CoCrFeMnNi origin |
| Gludovatz et al. Science 2014 | REAL: cryogenic strength–ductility–toughness synergy; KJIc ≳ 200 MPa·m½ |
| Zhang et al. Nat. Commun. 2015 (ncomms10143) | REAL: planar slip → nanotwinning; damage-tolerance mechanisms |
| Laplanche et al. Acta Mater. 2016; Keli et al. Intermetallics 2019 | REAL: twin onset strains ~25% (293 K) / ~8% (77 K); ~750 MPa twinning stress |
| Liu et al. Science 2022 (abp8070) | REAL: 20 K toughness; SF + nanotwins + ε-HCP synergy; CrCoNi vs Cantor |
| Li / Zhao / Ritchie / Meyers Prog. Mater. Sci. 2019 | REAL: FCC HEA mechanical-property review; MPEA naming; SFE ~20–25 mJ m⁻² class |
| Miracle & Senkov HEA/MPEA/CCA critical review lineage | REAL: entropy not universal stabilizer; prefer MPEA/CCA when precise |
| Otto et al. multi-equiatomic comparison; long-anneal GB Cr-rich phases | REAL: single-phase not automatic; decomposition caveat |
| Mn-oxidation literature 2024 (HTM / CMD / JMES Cantor oxidation series) | REAL: Mn outward diffusion, spinel/chromia scales, Mn↓/Cr↑ helps |
| Jiang et al. cMat 2025 cryogenic HEA review | Near-primary: deformation mechanism summary at 77 K |
| Project-internal: secondary index Layer A; CONCLUSIONS-v1-addendum; mechanism taxonomy; Fe–C / Ni–γ′ checklists; chem-for-linguists | Stack consistency; Layer A earn / Layer C park; Bridge A lock |
v0 — 2026-09-19 continue-research. Real metallurgy walkthrough linking Triskelion Layer A anchors. Bridge A flagged SPECULATIVE pedagogy only. Ditransitive ↔ triple-junction SPECULATIVE/parked. No joint field.
Corpus note: worked-cantor-hea-checklist-v0.md. Materials first; Bridge A peg last.