No joint field · Bridge A = SPECULATIVE pedagogy

Labels: SOURCED HYPOTHESIS SPECULATIVE OPEN NONE (REAL = same-domain materials or linguistics, shown like SOURCED)

Path C · Host checklist

Worked walkthrough — CNT / graphene charge-transfer intercalation doping

  1. 1 Diagram
  2. 2 Mechanism
  3. 3 Failure past the window
  4. 4 Metastability
  5. 5 SPECULATIVE Bridge A peg

What’s claimed and how well supported

Labels on this page
SPECULATIVE ×17
Strongest label used
SPECULATIVE
Main caveat (quoted)
Locks: Bridge A locked as ◆ SPECULATIVE supporting case only.

Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.

Terms on this page (11), plain-language definitions
Vacancy
Point defect: a missing atom site in the lattice.
Host (matrix)
Majority element/phase whose lattice dominates the material.
Dopant
Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
Dislocation
Line defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries.
Solute
Intentional minority species dissolved in the host (alloying addition).
Precipitate
Second-phase particle that forms (often on aging) and blocks dislocations.
Valence (chem.)
Bonding capacity / oxidation-related electron count of an atom in context.
FCC
Face-centered cubic — many slip systems; Al, Cu, Ni typically ductile.
HCP
Hexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.
BCC
Body-centered cubic — Fe/steel common; plasticity more temperature-sensitive.
Valency (ling.)
Arity: how many actants a predicate takes; formal vs semantic valency can diverge.

Definitions quoted from the Chem for linguists primer glossary.

Materials first. The cross-domain peg stays last, and it stays SPECULATIVE.

Date: 2026-09-19
Audience: syntax/semantics readers building materials literacy (Chem for linguists)
Purpose: Fill the intercalation chassis that Chem for linguists §5 and Physics of doping §1.4 already name beside alloying and substitutional doping — same checklist discipline as Al–Mg / Cu–Ni / Fe–C / Ni–γ′ / Mg / Ti / oxide electronic, but with non-covalent charge-transfer intercalation (guest in channels / gaps), not SSS and not oxide vacancyPoint defect: a missing atom site in the lattice.-mediated substitution.
Locks: Bridge A locked as SPECULATIVE supporting case only. Materials facts first; linguistic parallels only in a flagged box at the end. Bridge D (intercalant ↔ oblique) = one short flagged paragraph max. No joint-field claim. Navajo typed-participant half = light parallel only — not proof of Bridge A count. Dowty / Triskelion / Merge·Agree / kanji not advanced here.

Companion notes: Grant doping-materials-science-takeaway.txt §4–6 (AlCl₄⁻ DWCNT + 3D-print graphene path); Physics of doping §1.4 (intercalation row); Chem for linguists §5 (alloying vs doping vs intercalation); Oxide electronic (electronic-doping contrast); Conclusions; Worked examples Bridge D probe.


0. Design brief (problem-driven)

Slot Choice
HostsMajority element/phase whose lattice dominates the material. (primary) DWCNT fibers (highly aligned macroscopic yarns); graphene / few-layer graphene (sheets, inks, printed traces)
Hosts (brief) SWCNT / MWCNT networks; CNT–polymer composites; CNT fiber cables
Named weakness of pure hosts Individual CNTs / graphene flakes can be excellent conductors, but macroscopic fibers, films, and printed composites lag metals: junction resistance, imperfect alignment, low carrier density relative to Cu, and (for graphene) no native band gap for switching
Intended mechanism Charge-transfer intercalation doping — guest anions/cations (or molecular acceptors/donors) sit in intertube channels / van der Waals gaps; non-covalent electron transfer raises host carrier density while the sp² framework stays intact
Service hint Lightweight high-conductivity cables; flexible / wearable interconnects; post-print conductive traces on graphene-composite bodies

Vocabulary lock (this note): here “dopantIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.” / “intercalant” are both appropriate — and intercalation must stay distinct from substitutional SC doping and from metal SSS. Prefer intercalant when emphasizing guest-in-gap placement; dopant when emphasizing intentional carrier engineering. Do not collapse this file into Al–Mg SSS talk or into TiO₂:Fe vacancy talk.


1. Chem-for-linguists checklist (§8) — filled (intercalation edition)

1. What is the inherent weakness of the pure / base form?

  • CNT fibers / networks: Outstanding single-tube transport does not automatically translate to bulk yarn/film conductivity — intertube junctions, misalignment, and residual catalyst/amorphous carbon limit macroscopic σ.
  • Graphene / printed graphene composites: High in-plane mobility in ideal sheets, but flake-to-flake junction resistance, porosity, and binder dilute the network; absolute σ still lags bulk Cu for many printed traces.
  • Not the weakness: soft yield strength / dislocationLine defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries. mobility (Al, Mg, …) or wide oxide band gap / recombination (TiO₂). Different design problem → different physics.

2. Which obstacle / tuning mechanism is doing the work?

Primary: intentional intercalative / charge-transfer dopants that: 1. occupy free volume (intertube channels in aligned DWCNT bundles; interlayer galleries in graphite/graphene stacks); 2. accept or donate electrons from/to the carbon π-system (non-covalent); 3. raise free carrier density without substituting on sp² lattice sites.

Co-actors (first-class, not footnotes): process atmosphere that forms the active intercalant (e.g. AlCl₃ + excess Cl₂ → AlCl₄⁻); polymer / cable sheath encapsulation; alignment / packing density of the host fiber; moisture / O₂ as dedoping agents.
Explicitly not: Labusch/Curtin SSS; cementite networks; γ′ precipitation; substitutional P-in-Si; Fe:TiO₂ mid-gap + V_O photocatalysis.

3. What trade-offs are accepted?

  • Huge σ / specific-σ gains ↔ air/moisture instability of many high-performance intercalants (AlCl₄⁻ family).
  • High intercalant volume fraction ↔ risk of mechanical softening, swelling, or long-term diffusion loss (host-dependent; DWCNT concentric geometry can host without large expansion).
  • Post-print / vapor doping convenience ↔ diffusion blur of doped boundaries.
  • Metallic conductivity boost ↔ still no band gap for FET on/off in pure graphene.

4. How critical is processing vs nominal composition?

Very. Same “AlCl₄⁻ doped CNT” label can mean: ordered chains in intertube channels with strong charge transfer; surface adsorbates only; moisture-degraded residues; or polymer-sheathed cable retaining most of the boost. Exposure time, Cl₂ excess, alignment quality, and encapsulation dominate. Characterization (Raman G-shift / splitting, conductivity vs humidity aging, TEM/XRD intercalant order) is non-negotiable (Grant takeaway §5, §9).

5. Problem-driven or exploratory?

Problem-driven for named goals: (A) close the Cu conductivity gap in lightweight CNT fibers; (B) flexible / wearable conductors; (C) selective conductive traces on 3D-printed graphene bodies. Exploratory intercalant chemistry and stability engineering still dominate the open literature.


2. Hosts and intercalant cast (REAL materials)

2.1 DWCNT fibers — AlCl₄⁻ charge-transfer intercalation (2026 Science headline)

Item Approximate figure / fact Role
Host Highly aligned double-walled CNT fibers Concentric geometry → slightly larger inter-wall / intertube free volume than planar multilayer graphene
Process Vapor: AlCl₃ + excess Cl₂, ~24 h (IMDEA / Vilatela lineage) Generates AlCl₄⁻; diffusion into intertube channels (“settling,” not forced insertion)
Placement Intertube channels; chains of AlCl₄⁻; mostly outer-wall charge transfer Non-covalent acceptor intercalant
Charge transfer ~0.65 e⁻ accepted per AlCl₄⁻ (reported) Raises hole density in carbon π-system
Intercalant volume ~17% volume fraction (reported) Enough guest to move macroscopic σ without wrecking sp² framework
Conductivity From ~1.4 MS/m → up to ~24.5 MS/m (~10×; ~41% of Cu at RT) Absolute σ approaching Cu class
Specific conductivity Up to ~17,345 S·m²/kg Exceeds metals on per-weight basis
Mechanics / mass Reported ~5× stronger and ~½ weight vs conventional overhead cables (study claim) Structural + electrical co-benefit
Stability Dry-stable; humid air degrades; polymer cable sheath retained ~80% conductivity over ~5 days in reported protection test Encapsulation is part of the materials system

Mechanisms to name (CNT fiber): 1. Charge-transfer intercalation — AlCl₄⁻ accepts electrons from CNT π-system → higher free-carrier density.
2. Non-covalent / interstitial placement — guest in channels, not C-site substitution; sp² framework preserved.
3. Alignment + packing coengineering — intercalation multiplies what aligned DWCNT geometry already enables; random mats see more junction-limited ceilings.
4. Process-generated active species — excess Cl₂ is a co-actor that forms AlCl₄⁻ (cf. Physics of doping co-dopant / process-agent note).

Sources (headline): de Isidro-Gómez et al., Science (published 2026-04-23), DOI 10.1126/science.aeb0673; Chemistry World / Phys.org 2026 digests of the same result; Grant doping-materials-science-takeaway.txt §4.

2.2 Graphene / few-layer graphene — molecular & intercalative charge transfer

Item Approximate figure / fact Role
Host Monolayer / few-layer graphene; graphite galleries vdW gaps host intercalants / adsorbates
Acceptors (p-type) HNO₃, SOCl₂, MoO₃, FeCl₃, halogen-based, … Withdraw e⁻ from graphene → holes; sheet resistance drops
Donors (n-type) Alkali metals, some amines / organics, Li intercalation families Donate e⁻ → electrons
Stability pattern Many wet/chemical dopants dedope in air/moisture (SOCl₂, HNO₃ often poor; MoO₃ relatively better but still moisture-sensitive) Encapsulation / overlayer often required
“Settling” picture Exposure → diffusion → lowest-energy site → optional anneal/lock Same diffusion-settling language as CNT case (Grant §5)

Mechanisms to name (graphene): 1. Surface / intercalative charge transfer — molecular acceptors/donors shift EF without lattice substitution.
2. Electrochemical / adsorbate pathways — humidity and aqueous layers can add electrochemical doping distinct from pure electronic charge transfer (keep named separately).
3. Gallery intercalation compounds — graphite intercalation compounds (GICs) as the bulk sibling of few-layer doping.

2.3 Brief: CNT fibers beyond AlCl₄⁻; composites; 3D-print traces

Host / path Goal Doping / process note “Over” caution
Other CNT-fiber dopants (e.g. endohedral MoCl₅ + N co-strategies in 2025–2026 fiber literature) Ultrahigh specific σ + environmental durability Synergistic substitutional/defect + endohedral intercalant packages Mixing mechanisms without naming them; claiming “AlCl₄⁻ clone” when chemistry differs
CNT / graphene–polymer composites Flexible electronics, EMI shielding, printed inks Network percolation + optional post-dope Junction resistance dominates; bulk σ << single-tube / aligned-fiber values
3D-printed graphene bodies + selective doping Monolithic structural electronics / traces / vias Post-print vapor/solution dope or doped ink Diffusion blur; moisture-sensitive dopants; no band gap for logic switching; near-term hybrids more practical than fully monolithic boards (Grant §6–7)

3. Intercalation vs substitutional doping (and vs metal SSS)

Do not treat AlCl₄⁻-in-channel as “just another P-in-Si.” Placement and chemistry differ.

Mode Where the guest sits Bonding / transfer Host lattice fate Headline example
Substitutional doping Regular lattice site Covalent / lattice-bonded; shallow or deep levels Host sites occupied by impurity Si:P, GaN:Mg, TiO₂:Fe, Al:ZnO
Interstitial (crystal) Voids inside a 3D crystal lattice Often deep traps / compensators Can strain / compensate Mn_I in (Ga,Mn)As
Intercalation / intercalative CT vdW gaps, nanotube channels, layered galleries Often non-covalent charge transfer sp² / layered framework can stay intact AlCl₄⁻ in DWCNT; FeCl₃–GIC; molecular CT on graphene
Metal SSS / alloying Substitutional (or interstitial C) solutesIntentional minority species dissolved in the host (alloying addition). at % levels Metallic bonding; scattering Mechanical / phase redesign Al–Mg, Cu–Ni, Fe–C

Honest fork: some CNT strategies combine N sidewall doping (defect/substitution-like) with endohedral intercalants — name each mechanism; do not smash into one word “doped.”


4. Concentration / loading windows — under / useful / damage / instability

Zone DWCNT + AlCl₄⁻ reading Graphene CT / printed network reading
Too little (dilute effect) Sparse intercalant; macroscopic σ still junction- or packing-limited; negligible CT Sheet resistance barely moves; adsorbate coverage too low
Useful window Ordered channel filling (~tens of % volume in the headline fiber case) with strong CT, intact sp², dry stability + sheath Coverage / gallery stage that minimizes sheet resistance without wrecking film integrity
Structural damage / over-expansion Forcing guests into hosts that cannot accommodate without buckling, debundling, or covalent functionalization damage Aggressive oxidation / covalent functionalization mistaken for CT doping
Moisture / air instability Humid dedoping / ion reaction with H₂O → σ fade HNO₃/SOCl₂-class rapid recovery of undoped sheet resistance
Network / composite ceiling Even well-doped tubes fail if yarn alignment / contacts are poor Flake–flake junctions dominate printed traces

Order-of-magnitude anchors (not design specs): classical SC doping often ppm–ppb; oxide photocatalyst doping often 0.1–5%; AlCl₄⁻ DWCNT useful loading is reported near ~17% intercalant volume — denser than Si:B, still a guest-in-free-volume story, not a metal SSS wt% story. See Physics of doping §2 and Grant takeaway §4.


5. “Over” / failure is plural (name which failure)

Overrun mode Physics Where it shows up
Air / moisture sensitivity Intercalant reacts with H₂O / O₂; charge transfer reverses; ionic residues AlCl₄⁻ fibers in humidity; many acid/halogen graphene dopants
Diffusion blur Dopant migrates beyond intended region during/after vapor or solution exposure Selective traces on printed graphene; fine-feature resolution loss
Junction resistance in composites Percolating network contacts dominate R; intercalation of tubes does not erase tube–tube or flake–flake barriers CNT inks, graphene–polymer prints
No band gap for switching Pristine graphene is a zero-gap semimetal; CT doping raises σ but does not create FET on/off “Print a whole computer from graphene” fantasy path (Grant §6)
Structural damage / covalent wrecking Aggressive chemistry opens sp² lattice, creates scattering centers Mis-labeled “doping” that is really functionalization damage
Dedoping / desorption over time Guest leaves lowest-energy site; sheet R climbs toward undoped baseline Unencapsulated MoO₃/HNO₃/SOCl₂ aging curves

Hard contrast vs prior hosts: Al–Mg “over” was GB β / sensitization; Fe–C was cementite / martensite morphology; Ni–γ′ was TCP / overaging; oxide electronic was recombination / μ collapse / vacancy compensation. Here “over” is environmental stability + network transport + (for graphene) missing gap first. Same count intuition, different physics.


6. Hard contrast — oxide electronic doping and metal SSS

Case Prefer saying Why
This file: AlCl₄⁻–DWCNT, FeCl₃–GIC, molecular CT–graphene Intercalant / charge-transfer intercalation doping Guest in gaps/channels; non-covalent CT; sp² intact
Oxide electronic (TiO₂:Fe, Al:ZnO) Dopant / electronic doping (+ V_O co-actors) Substitutional cations + vacancy chemistry; mid-gap / carriers / TCO
Al–Mg AA5083 Solute / alloying (SSS) Percent-level Mg for dislocation pinning — not carriers
Fe–C steels Interstitial C / alloying Strength + phase transformation — not electronic doping
Ni–γ′ superalloys γ′ former / alloying Wanted precipitateSecond-phase particle that forms (often on aging) and blocks dislocations. strengthening
Cu–Ni conductivity alloys Solute (Nordheim scattering) Alloying usually lowers metal conductivity
Si:P / GaN:Mg Substitutional dopant Lattice-site donors/acceptors — mechanism sibling to oxide, not to intercalation

False-friend reminder (Conclusions §5): SSS “chemical interaction,” Chen–Boyle “valenceBonding capacity / oxidation-related electron count of an atom in context. effect,” and Hume-Rothery chemical valence are not this file’s charge-transfer intercalation.

Contrast card vs oxide checklist: oxide note trained true dopant language with substitution + vacancies; this note trains true intercalant language with channel/gap CT. Both are electronic-property engineering; placement physics differs.


7. Bridge A add-on checklist (depth note §6) — filled

  1. Where is the solubility / activation limit at process conditions?
    Intercalation “capacity” is set by free volume + chemistry + kinetics, not a classic binary solvus. Read electrical activation (σ, sheet R, Raman G-shift) together with intercalant order and humidity aging.

  2. Intended mechanism?
    Charge-transfer intercalation (non-covalent). Name fiber-cable vs flexible-film vs printed-trace goal explicitly. Do not call Al–Mg SSS “doped,” and do not call AlCl₄⁻ “substitutional.”

  3. What fails first past the window?
    Goal-dependent: moisture dedoping (AlCl₄⁻) vs junction ceiling (composites) vs diffusion blur (selective print dope) vs missing band gap (logic fantasy).

  4. Metastability?
    Yes — many useful intercalated states are process-captured and environment-fragile. Three clocks still apply (Process metastability): equilibrium guest–host chemistry, process exposure path, service atmosphere (dry vs humid; sheath or not).

  5. Only then — SPECULATIVE Bridge A mnemonic
    See §8. Never invert: do not pick intercalant volume % from a linguistic arity table.


8. Under / useful / over — materials only (no linguistics yet)

Zone DWCNT–AlCl₄⁻ reading Graphene / print reading
Under Sparse intercalant; σ still far below Cu; packing/junction limited Negligible CT; high sheet R; undoped junctions
Useful window Ordered AlCl₄⁻ in channels; ~10× σ; high specific σ; dry + sheath Sheet R minimized; carriers up; host lattice intact; encapsulated if needed
Over / wrong regime Humid fade; structural damage from wrong chemistry; loss of alignment benefits Dedoping; diffusion blur; junction-dominated composites; expecting FET switching from gapless graphene

Honest split: moisture dedoping ≠ junction-limited composite ceiling ≠ missing band gap. All can kill the application; they are different physics.


SPECULATIVE Cross-domain section. Open after the materials.

9. SPECULATIVE Bridge A overlay (supporting only)

Everything in this section is pedagogical analogy. It does not make doping × θ-roles a joint field.
Why this host earns a Bridge A peg among project hosts: prior metal checklists trained windows on SSS / interstitial C / precipitation (prefer solute); oxide checklist trained windows on substitutional dopants + vacancies. Here the tuned quantity is still carriers, but the guest is a channel/gap intercalant — under/useful/over tracks loading + environmental survival of that guest configuration.

Materials fact SPECULATIVE Bridge A reading
Useful intercalant loading (e.g. ~17 vol% AlCl₄⁻ class with strong CT, intact sp²) Saturated intended electronic configuration: enough intercalant “participants” for carriers without wrecking the host story
Undoped / sparsely doped CNT fiber or graphene network Under-filling relative to design intent (σ still junction- or carrier-limited)
Excess / wrong regime → moisture fade, structural damage, junction ceiling, diffusion blur, gapless “switching” miss Overrun / failed regime: “extra” or misplaced participants force a regime repair (dedoping, damage, blur) that misses the property you wanted
Continuous loading / coverage vs discrete lexical arity Asymmetry: intercalant fraction is continuous; verb arity is typically discrete — do not force integer “slots” onto doping curves
Intercalant vs substitutional dopant as distinct cast members Do not smash into one “argument” type (Solubility windows asymmetries; Physics of doping §1.4)

Earn: helps a linguist remember why free-volume capacity, charge-transfer strength, encapsulation, and junction physics belong on the same page — on the chassis where intercalant is the honest word.
Collapse: if AlCl₄⁻ ions are called θ-roles; if 17 vol% is treated as an arity integer; if moisture dedoping is equated with adjunct licensing; if Navajo morphological typing is treated as evidence for this count story; if a joint field is announced.

Navajo morphology saturates typed participants on the verb (secondary index; Grant clarification secondary index). Bridge A is the count/windows half. Intercalation’s cast (sp² host, intercalant, transferred carrier, process co-agent, encapsulant) is a tempting typed-participant mnemonic — keep it parallel, never as evidence that Bridge A’s under/useful/over ladder is proven by Athabaskan morphosyntax.


SPECULATIVE Cross-domain section. Open after the materials.

9b. SPECULATIVE Bridge D — intercalant ↔ oblique (one short paragraph; optional probe only)

SPECULATIVE Charge-transfer intercalants (e.g. AlCl₄⁻ in DWCNT channels) raise carrier density without occupying substitutional lattice sites; the host framework can remain intact (Grant takeaway §4; Physics of doping §1.4). SPECULATIVE In linguistics, adjuncts/obliques contribute to the scene without saturating a core θ-slot (Linguistics: theta; Worked examples Bridge D). Optional probe only: intercalant: substitutional dopant:: adjunct: core argument — peripheral contributor vs site-filling participant. Asymmetry: intercalation is its own materials mechanism; adjuncthood is a syntactic diagnostic cluster. Do not treat intercalants as “failed substitutional dopants,” or adjuncts as “failed arguments,” just to force the parallel. Not evidence for Bridge A; not a joint field.


10. Host contrast card (eight pegs; “over” is not one physics)

Host Diagram / lattice First “over” (typical) Bridge A peg ( SPECULATIVE)
Al–Mg AA5083 Limited solvus; FCCFace-centered cubic — many slip systems; Al, Cu, Ni typically ductile. Al + subst. Mg GB β / sensitization (IGC) Solvus overrun → unwanted second phase
Cu–Ni Isomorphous complete SSS Conductivity / TCR property curves Property-curve overrun (no Ni second phase)
Fe–C Eutectoid Fe–Fe₃C; interstitial C Cementite networks / brittle as-quenched M / temper–RA Transformation / morphology overrun
Ni–γ′ γ/γ′ solvus; wanted precipitate Overaging / rafting gone wrong / TCP Wanted γ′ vs wrong second phase
Mg (host) HCPHexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.; AZ/AM/ZK (+ RE) Brittle IMCs; galvanic β; creep; ignition β ambivalent; slip-system / safety “over”
Ti (host) HCP α / BCCBody-centered cubic — Fe/steel common; plasticity more temperature-sensitive. β; β-transus; Ti-6Al-4V α-case; O/H embrittlement; ω; β flecks Wanted α morphology vs unwanted ω / α-case
Oxide electronic Wide-gap oxide + subst. metal + V_O Recombination centers; μ collapse; secondary oxides; vacancy compensation Carrier / mid-gap window overrun — true dopant language
CNT/graphene intercalation (this file) sp² framework + guest in channels/gaps Moisture dedoping; diffusion blur; junction R; no band gap for switching Intercalant loading / stability window — true intercalant language

11. What this walkthrough trains you to do next

For any new CNT / graphene intercalation or CT-doping pair:

  1. Name the goal (fiber cable σ / flexible interconnect / printed trace).
  2. Name intercalant vs any substitutional/defect co-strategy separately.
  3. Sketch the loading / aging curve (σ or sheet R vs exposure, humidity time, encapsulation).
  4. Name the first failure past the peak (moisture vs junctions vs blur vs damage vs gapless switching).
  5. Ask whether the useful intercalated state is metastable in service atmosphere (three clocks).
  6. Only then, if useful for memory, hang the SPECULATIVE Bridge A count peg — and at most a one-paragraph Bridge D oblique probe.

Contrast card vs seven prior hosts: this note adds the chassis where intercalant / charge-transfer intercalation is the honest word — completing the alloying vs doping vs intercalation triangle in Chem for linguists §5.


12. Non-claims

  • No joint field of doping × θ-roles / valencyArity: how many actants a predicate takes; formal vs semantic valency can diverge..
  • Bridge A remains SPECULATIVE pedagogy / probe; lock unrevised.
  • Bridge D remains an optional SPECULATIVE probe (one short paragraph); not evidence for Bridge A.
  • Navajo θ-morphology does not prove Bridge A count.
  • 3D-printed monolithic graphene computers remain a long-term aspiration; near-term hybrids are the practical path (Grant §7).
  • Numbers herein are order-of-magnitude literature anchors, not recipe specifications.
  • This walkthrough does not revise Bridge A’s lock, invent shared formalism, or announce a product.

13. Sources consulted (2026-09-19 note)

Source Role
Grant doping-materials-science-takeaway.txt §§4–7; grant-doping-cast.md (not published here); Physics of doping §1.4; Chem for linguists §5 Project cast + intercalation frame
de Isidro-Gómez et al., Science (2026-04-23), DOI 10.1126/science.aeb0673 AlCl₄⁻ DWCNT fibers: 24.5 MS/m, 17 345 S·m²/kg, 0.65 e⁻/anion, 17% vol, sheath ~80%
Chemistry World 2026 “Dopant boosts carbon nanotubes’ conductivity tenfold”; Phys.org 2026-04 digest Process (AlCl₃ + Cl₂, 24 h), moisture caveat, industry-facing summary
Charge-transfer graphene/CNT reviews (Rao lineage; noninvasive CT doping stability studies) Acceptor/donor families; air/moisture dedoping patterns
CNT-fiber hybrid doping digests (e.g. N + endohedral MoCl₅ specific-σ claims, 2025–2026) Sibling fiber strategies; mechanism-naming caution
Project-internal: oxide electronic checklist; Al/Cu/Fe–C/Ni–γ′/Mg/Ti checklists; Conclusions + v1-addendum; Worked examples Bridge D; Solubility windows; Process metastability Checklist discipline + contrast

v0 — 2026-09-19 continue-research. Real charge-transfer intercalation walkthrough; Bridge A flagged SPECULATIVE; Bridge D one short flagged paragraph. No joint field.

Corpus note: worked-cnt-graphene-intercalation-checklist-v0.md. Materials first; Bridge A peg last.