Worked walkthrough — Austenitic Fe–Mn TWIP steels through the alloy-design checklist
- 1 Diagram
- 2 Mechanism
- 3 Failure past the window
- 4 Metastability
- 5 SPECULATIVE Bridge A peg
What’s claimed and how well supported
- Labels on this page
- SPECULATIVE ×10
- Strongest label used
- SPECULATIVE
- Main caveat (quoted)
- Locks: Bridge A locked as ◆ SPECULATIVE supporting case only (pedagogy after materials).
Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.
Terms on this page (9), plain-language definitions
- Host (matrix)
- Majority element/phase whose lattice dominates the material.
- FCC
- Face-centered cubic — many slip systems; Al, Cu, Ni typically ductile.
- Dopant
- Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
- BCC
- Body-centered cubic — Fe/steel common; plasticity more temperature-sensitive.
- Work hardening
- Strength rise from cold deformation via dislocation multiplication/tangling.
- Dislocation
- Line defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries.
- HCP
- Hexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.
- Solute
- Intentional minority species dissolved in the host (alloying addition).
- Valency (ling.)
- Arity: how many actants a predicate takes; formal vs semantic valency can diverge.
Definitions quoted from the Chem for linguists primer glossary.
Materials first. The cross-domain peg stays last, and it stays SPECULATIVE.
Date: 2026-09-19
Audience: syntax/semantics readers building alloy-design literacy (Chem for linguists)
Purpose: Execute an austenitic Fe–Mn TWIP steel (TWIP = twinning-induced plasticity) hostMajority element/phase whose lattice dominates the material. walkthrough with the same checklist discipline as Cantor HEA and Fe–C. Materials first; SFE window as the real design meter.
Locks: Bridge A locked as SPECULATIVE supporting case only (pedagogy after materials). Materials facts first; linguistic parallels only in a flagged box. No joint-field claim. Dowty / Triskelion / Merge·Agree / kanji / Navajo θ-typing not advanced here. Triskelion ditransitive ↔ triple-junction remains parked (Cantor checklist owns that caution).
Companion notes: Cantor HEA (cryogenic HEA TWIP-like cousin); Fe–C (interstitial C / transformation baseline); Mechanism taxonomy; Conclusions; Chem for linguists §5–§8; Solubility windows; Process metastability; secondary index Layer A3 (TWIP/TRIP as REAL mechanisms).
- 0. Design brief (problem-driven)
- 1. Chem-for-linguists checklist (§8) — filled (TWIP edition)
- 2. What austenitic Fe–Mn TWIP is (REAL materials)
- 3. Goal-dependent windows — name the mechanisms
- 4. What “over” / “off-window” means — not one physics
- 5. Metastability / kinetics — first-class
- 6. Vocabulary hygiene — alloying, not dilute doping
- 7. Bridge A add-on checklist — filled carefully
- 8. Under / useful / over — materials only (no linguistics yet)
- 9. SPECULATIVE Bridge A overlay (supporting only)
- 10. Contrast table — TWIP vs Cantor vs Fe–C vs Si:P
- 11. What this walkthrough trains you to do next
- 12. Sources consulted (2026-09-19 note)
0. Design brief (problem-driven)
| Slot | Choice |
|---|---|
| Host / alloy family | Austenitic high-Mn steels — Fe–Mn–C (–Al–Si) with fully (or nearly fully) FCCFace-centered cubic — many slip systems; Al, Cu, Ni typically ductile. γ-austenite at RT |
| Named acronym | TWIP = twinning-induced plasticity |
| Composition window (order) | ~15–30 wt% Mn; C typically ~0.05–1.2 wt% (classic anchors ~0.6 wt% C); optional Al (~0–3+ wt%) and Si (~0–3 wt%) as SFE / density / strength levers |
| Named weakness of low-Mn / ferritic AHSS contrast | Many advanced high-strength steels trade ductility for strength; formability and crash energy absorption suffer. Soft annealed austenite alone is too soft without a sustained hardening mechanism |
| Intended mechanism | Deformation twinning in low-to-moderate stacking-fault energy (SFE) FCC austenite → dynamic Hall–Petch (twin boundaries as barriers) → high strain hardening → delay necking → high UTS × high uniform elongation |
| Service hint | Automotive crash / formability grades (AHSS family); research / hydrogen-service variants; not a dilute electronic-doping story |
Vocabulary lock: Prefer alloying / high-Mn austenitic steel / TWIP steel. Do not call ~18–30 wt% Mn “doped iron.” Reserve dopantIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase. for dilute electronic (etc.) intent. C is an interstitial alloying addition that also tunes SFE — still not Si:P-style doping. See §6.
Hard contrast to prior checklists: - vs Fe–C: same interstitial C intuition, but the host is stable FCC austenite at RT (Mn + C austenite stabilizers), not quench-from-γ → martensite as the headline path. - vs Cantor HEA: both can show TWIP-like twinning, but TWIP steels are Fe-majority + high Mn (one-principal host language still fits), not five equiatomic co-principals. - vs Si:P / GaN:Mg: mechanical plasticity window, not carrier density.
1. Chem-for-linguists checklist (§8) — filled (TWIP edition)
1. What is the inherent weakness of the pure / base form?
- Pure Fe at RT is BCCBody-centered cubic — Fe/steel common; plasticity more temperature-sensitive. α-ferrite — soft when annealed; no useful room-temperature austenite without austenite stabilizers.
- Without a hardening mechanism that keeps working to large strain, high-strength sheet steels often neck early (strength↑, uniform elongation↓).
- Design goal: keep an FCC austenite matrix that twins under deformation so work hardeningStrength rise from cold deformation via dislocation multiplication/tangling. stays high → giga-Pascal-class UTS with tens of % elongation (product of strength × elongation often cited ~40–60+ GPa·% class in reviews).
2. Which obstacle / plasticity mechanism is doing the work?
| Regime | Mechanism (name it) |
|---|---|
| Early plastic strain | DislocationLine defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries. glide in FCC γ; Shockley partials + stacking faults when SFE is low |
| Useful TWIP window | Mechanical twinning on {111}⟨112⟩ — twins refine mean free path → dynamic Hall–Petch |
| Too-low SFE | TRIP: stress/strain-induced γ → ε-HCPHexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic. (and sometimes α′) martensite |
| Too-high SFE | Twin suppressed; dislocation glide (planar → wavy / cells) or MBIP (microband-induced plasticity) in some Fe–Mn–Al–C reports |
| Concurrent | Interstitial C SSS + grain-size Hall–Petch; optional Al/Si solid-solution contributions |
Explicitly not: Mott-style electronic doping; calling Mn a “dopant”; Prayerant mode toggles.
3. What trade-offs are accepted?
- High Mn ↑ austenite stability / SFE control ↔ cost, Mn segregation / inclusion (MnS) issues, welding / galvanizing complexity, delayed-fracture / H sensitivity in some chemistries.
- Al ↑ SFE (helps HE resistance in many reports) ↔ can lower twinning propensity if pushed too far; density↓ is often wanted.
- Si ↑ strength / can favor ε pathways in some ranges ↔ HE / surface issues in some reports.
- Outstanding ductility ↔ negative strain-rate sensitivity and fast post-necking fracture in some TWIP grades (formability nuance).
- Classic Fe–18Mn–0.6C is strong+ductile but historically hydrogen delayed fracture sensitive in cup-draw geometries → Al-added grades (e.g. Fe–18Mn–1.5Al–0.6C) as a common industrial answer.
4. How critical is processing vs nominal composition?
First-class. Composition sets the thermodynamic SFE (and austenite stability). Grain size, recrystallization anneal, cold reduction, and service T shift the effective twinning window (finer grains tend to raise apparent SFE / suppress TWIP–TRIP). Hydrogen charging / residual H is a process/service-clock failure mode, not “more Mn% = always better.”
5. Problem-driven or exploratory?
Problem-driven for automotive AHSS formability/crash; exploratory for HE-resistant / H-storage austenitics and for metastability-engineered TRIP–TWIP hybrids. This checklist treats TWIP as a REAL Layer A peg (plasticity mechanism) — not as proof of linguistic alloy ontology.
2. What austenitic Fe–Mn TWIP is (REAL materials)
2.1 Identity card
| Fact | Approximate figure / lore | Role |
|---|---|---|
| Host lattice | FCC austenite (γ) at RT | Mn + C (and often Al/Si tuning) stabilize γ vs α/ε |
| Mn window | ~15–30 wt% Mn (common commercial/research band ~15–25; classic ~18–22) | Austenite stabilizer; primary SFE lever with C/Al/Si/T |
| Carbon | Often ~0.5–0.7 wt% C in “classic” grades (e.g. Fe–18Mn–0.6C); low-C and high-C variants exist | Interstitial SSS + SFE / twinning stress |
| Al / Si variants | Fe–Mn–Al–C; Fe–Mn–Al–Si–C (Grässel / Frommeyer lineage; ~3Al–3Si class teaching alloys) | Raise SFE (Al strong); density / strength / oxidation nuances |
| Structure goal | Fully austenitic (or controlled dual-phase TRIP–TWIP) | Single-phase FCC for “pure” TWIP pedagogy |
| Headline properties | UTS often ~800–1200+ MPa with elongation ~40–80% class (process-dependent) | Strength–ductility synergy via twinning |
Pedagogy sentence: TWIP steels are high-Mn austenitic alloys engineered so that deformation twinning — not quench martensite as in Fe–C, and not dilute doping — delivers sustained hardening.
2.2 Stacking-fault energy — the real “window”
SFE is the energy cost of separating Shockley partials (creating a stacking fault). In FCC Fe–Mn austenite it is the central continuous control knob for which plasticity mode dominates:
| SFE band (mJ m⁻², order-of-magnitude pedagogy) | Dominant deformation mode | Name |
|---|---|---|
| ≲ ~18–20 | γ → ε (HCP) martensite (± α′) | TRIP |
| ~20–40 (some authors ~19–45) | Mechanical twinning | TWIP |
| ≳ ~40–45 (upper bound soft) | Dislocation glide; in some Fe–Mn–Al–C: MBIP / planar slip without prolific twinning | Glide / MBIP |
Caveats (honest): - Band edges are model- and measurement-dependent (thermodynamic Olson–Cohen-type SFE vs TEM partial separation vs XRD). Elastic-constant uncertainty can move an alloy across a reported boundary (Castañeda et al. Metals 2021 lineage). - SFE depends on composition and temperature (and grain size / short-range order effects in finer treatments). Raising T often raises SFE → can switch TWIP → glide (Allain et al. Fe–22Mn–0.6C: ~19 mJ m⁻² at RT → ~80 at 673 K class). - Twin vs ε distinction is crystallographic: twins = Shockley partials on successive {111}; ε = partials on every second {111} (Hirth / high-Mn steel teaching).
Example Mn series (Pierce et al. Acta Mater. 2014): Fe–22/25/28Mn–3Al–3Si → experimental SFE ~15 ± 3 / 21 ± 3 / 39 ± 5 mJ m⁻² — TRIP-leaning → TWIP → near upper TWIP/transition as Mn rises in that Al–Si frame.
Sources (headline): De Cooman, Estrin & Kim Acta Mater. 2018 (TWIP review); Pierce et al. Acta Mater. 2014 (Mn–SFE); Allain / Remy–Pineau / Frommeyer–Grässel lineages; Metals 2021 TRIP/TWIP comparative + SFE bands.
3. Goal-dependent windows — name the mechanisms
“Useful window” is not one solvus number. Name the goal first:
| Goal | Useful regime (materials) | Mechanism to name |
|---|---|---|
| Crash / formability (classic TWIP) | Fully austenitic; SFE in twinning band at service T; grain size tuned | Deformation twinning + dynamic Hall–Petch |
| TRIP–TWIP hybrid | Controlled metastability; SFE near TRIP/TWIP border | ε (± α′) + twins — more hardening, more HE risk if ε uncontrolled |
| Hydrogen / delayed-fracture resistance | Often Al-added grades (e.g. Fe–18Mn–0.6C–1.5Al); higher SFE; oxide barriers / less twin–H synergy | Suppress early twinning / ε; reduce H entry or change fracture mode |
| Density-reduced AHSS | Fe–Mn–Al–C with substantial Al | SFE↑ + density↓; watch twin suppression |
| Strength without twinning | High-SFE austenitics → MBIP / planar glide designs | Different “over” if you still wanted twins |
4. What “over” / “off-window” means — not one physics
Carry prior hosts’ lesson: “too much” is goal-dependent. For TWIP steels:
| Overrun / miss mode | What goes wrong | Physics family |
|---|---|---|
| Too-low SFE | Uncontrolled TRIP / ε (or α′) martensite; can raise hardening but often worsens HE / delayed fracture | Transformation overrun (cousin of Fe–C quench miss + Cantor TRIP-like caution) |
| Too-high SFE | Twins delayed or absent; lose TWIP ductility synergy; glide/MBIP dominate | Stacking-fault / twinning-stress window miss |
| Hydrogen embrittlement / delayed fracture | Cup-draw delayed cracking; intergranular / twin-boundary assisted cracks; HELP/HEDE-class mechanisms in literature | H trapping at dislocations, GBs, twins; Al often helps |
| Mn-related segregation / inclusions | GB chemistry changes (APT: B, C, P, … on general GBs; Mn depletion reported with O/H at some boundaries); MnS inclusions as crack nuclei | Segregation / inclusion metallurgy — not “dopant saturation” |
| Process miss (grain size / anneal) | Too-fine grains suppress twinning; wrong recrystallization → soft under-strength or brittle paths | Process clock |
| Welding / coating / cost | Industrial adoption friction (not a lattice window, but a real “off-window” for productization) | Manufacturing envelope |
Honest split: none of these is Mott MIT, AA5083 GB-β sensitization as the intended strength story, or Si:P impurity-band collapse — though wrong second phases / transformation products rhyme with Fe–C and Cantor TRIP lessons at the pedagogical layer only.
5. Metastability / kinetics — first-class
| Clock | TWIP reading |
|---|---|
| Equilibrium / CALPHAD | Austenite vs ferrite / cementite / κ-carbide (in Al-bearing grades) fields; Mn and C set γ stability |
| Process path | Hot roll → cold roll → recrystallization anneal sets grain size, annealing-twin fraction, residual dislocations |
| Deformation metastability | Stress/strain (+ T) activate twins or ε; SFE(T) can flip mode mid-duty |
| Service / H clock | Diffusible H + residual stress → delayed fracture hours/days after forming |
Three clocks (Process metastability) still apply — name which clock before hanging under/useful/over.
6. Vocabulary hygiene — alloying, not dilute doping
| Prefer | Avoid for TWIP Fe–Mn steels |
|---|---|
| High-Mn austenitic steel; TWIP steel; alloying (Mn, C, Al, Si) | “Mn-doped iron” / “C-doped TWIP” as semiconductor talk |
| Interstitial C as alloying addition that tunes SFE | Calling C a dopant (unless an electronic paper’s goal is explicit) |
| SFE window; TWIP vs TRIP vs glide | One binary “solubility limit” as the whole story |
| Deformation twinning / dynamic Hall–Petch | Equating Prayerant “Lead mode” with twinning |
6.1 Contrast: Cantor HEA TWIP vs Fe–Mn TWIP
| Fe–Mn TWIP steel (this note) | Cantor CoCrFeMnNi (HEA) | |
|---|---|---|
| Framing | One-principal Fe host + high Mn (+ C/Al/Si) | Five co-principals ~20 at.% each |
| Vocabulary | Alloying / AHSS / TWIP steel | HEA / MPEA — still not dilute doping |
| Fame temperature | RT automotive / formability | Cryogenic toughness poster child |
| Twin story | Engineered SFE band in Fe–Mn–C(–Al–Si) | Low SFE FCC + cryogenic twinning synergy |
| Bridge A peg | SFE window as continuous saturation analog — careful | Multi-component continuous space — harder peg |
Shared honest point: both are mechanical plasticity / alloying stories. Neither is Family 1 electronic doping.
6.2 Contrast: Fe–C interstitial baseline
| Fe–Mn TWIP | Fe–C (worked checklist) | |
|---|---|---|
| RT matrix | FCC γ (Mn/C stabilized) | BCC α (+ carbides / M after HT) |
| C’s headline job | SFE + SSS in austenite; enable twins | Quench–temper / pearlite / hardenability |
| First “over” (typical) | Wrong SFE (TRIP or no twin); H delayed fracture | Cementite networks; brittle as-quenched M |
| Shared vocabulary | C = interstitial soluteIntentional minority species dissolved in the host (alloying addition). / alloying — not dopant | Same |
Mechanism-taxonomy placement: TWIP headline = deformation twinning / transformation plasticity cousin of Family 3 concentrated SSS + Fe–Mn TRIP/TWIP — not Family 1 electronic doping. Interstitial C remains alloying.
Key pedagogy sentence: High-Mn TWIP composition ≠ dilute doping. Tens of wt% Mn and half-percent C are alloy design, not foreigners saturating a semiconductor host.
7. Bridge A add-on checklist — filled carefully
-
Where is the critical boundary?
Not a simple binary solvus. Read: (a) SFE bands separating TRIP / TWIP / glide; (b) austenite stability vs ε/α′; (c) H delayed-fracture envelope; (d) grain-size / anneal process window. -
Intended mechanism?
Deformation twinning in FCC austenite (dynamic Hall–Petch). Not electronic doping of Fe. -
What fails first past the window?
Goal-dependent (§4): too-low SFE → TRIP/martensite; too-high SFE → no twinning; H embrittlement / delayed fracture; segregation / inclusions; process miss. -
Metastability?
Yes — central for deformation twinning/TRIP and for H delayed fracture after forming. -
Only then — SPECULATIVE Bridge A mnemonic
See §9. SFE is a continuous energy window — closer to Cu–Ni property curves than to discrete lexical arity.
8. Under / useful / over — materials only (no linguistics yet)
| Zone | TWIP steel reading (formability / crash framing example) |
|---|---|
| Under | SFE too high or grains too fine → insufficient twinning → miss ductility/hardening product; or under-alloyed Mn → not fully austenitic / wrong phase mix |
| Useful window | Goal-relative: SFE in ~20–40 mJ m⁻² class at service T; fully austenitic; process-tuned grain size; chemistry that meets H-delayed-fracture spec (often Al-bearing) |
| Over / wrong regime | SFE too low → uncontrolled TRIP/ε; SFE pushed so high twins vanish; H-charged delayed fracture after cup draw; treating “more Mn” as automatic improvement without SFE/T/grain checks |
SPECULATIVE Cross-domain section. Open after the materials.
9. SPECULATIVE Bridge A overlay (supporting only)
Everything in this section is pedagogical analogy. It does not make doping × θ-roles a joint field. It does not promote Triskelion Prayerant mappings as metallurgy.
| Materials fact | SPECULATIVE Bridge A reading |
|---|---|
| Useful SFE band for TWIP at a named T / duty | Successful “saturation” of a plasticity-mode configuration |
| Too-high SFE (no twins) | Under-filling relative to the twinning cast (or wrong cast entirely) |
| Too-low SFE → TRIP/martensite past the intended TWIP design | Overrun: chemistry may still be “high-Mn austenitic,” but leaves the useful twinning cast |
| Continuous SFE (mJ m⁻²) vs composition × T | Same asymmetry as other hosts: continuous meters ≠ discrete lexical arity — do not force integer slots onto Mn% or SFE |
| Multiple distinct “over” physics (TRIP / glide / HE / segregation) | Bridge A’s count ladder is a memory peg; TWIP trains that “over” is a family, with SFE as the cleanest continuous analog |
Earn: trains Bridge A’s under/useful/over ladder on a named continuous materials window (SFE) that is not a binary solvus and not a carrier-density curve — after mechanisms are named.
Collapse: if TWIP is called “Mn doping of Fe”; if SFE bands are read off a valencyArity: how many actants a predicate takes; formal vs semantic valency can diverge. table; if TRIP martensite is equated with θ-saturation; if Cantor multi-principal space and Fe–Mn one-principal TWIP are collapsed into one arity story; if Navajo morphological typing is treated as evidence for this count story.
Explicit asymmetries (whiteboard): - Linguistics: often categorical well-formedness; TWIP: graded SFE optima + T + grain size + H kinetics. - Continuous SFE ≠ discrete lexical arity. - “Saturation” here means occupying the useful plasticity mode, not filling argument slots.
Risk flags ( SPECULATIVE section only):
1. SFE band edges are soft / author-dependent — do not teach them as sharp linguistic cutoffs.
2. HE / delayed fracture can fail a “perfect SFE” alloy — another clock, another “over.”
3. Cantor cryogenic TWIP-like fame ≠ automotive Fe–Mn TWIP product space — share mechanism family, not identity.
10. Contrast table — TWIP vs Cantor vs Fe–C vs Si:P
| Fe–Mn TWIP (this note) | Cantor HEA | Fe–C | Si:P (electronic) | |
|---|---|---|---|---|
| Design language | High-Mn alloying / AHSS | MPEA / HEA alloying | Interstitial C + HT | True dopant |
| Host | Fe (majority) + Mn | Five co-principals | Fe | Si |
| Headline window | SFE (TWIP band) | Twin/SFE + cryogenic toughness + oxidation | Quench–temper path | Carrier density |
| First “over” (typical) | TRIP if SFE↓; no twin if SFE↑; H delayed fracture | Mn oxidation; GB Cr-rich; unwanted σ/BCC | Brittle M; cementite networks | Mott / compensation |
| Twin story | RT engineered TWIP | Cryogenic nanotwinning fame | Not the Fe–C headline | N/A |
| Vocabulary | Alloying — not dopant | Alloying / MPEA — not dopant | Solute — not dopant | Dopant |
| Bridge A peg | SFE saturation analog — careful continuous | Harder multi-component | Transformation / morphology | Strongest electronic |
Pedagogy takeaway: TWIP steels train SFE as the real window, alloying ≠ doping, and plural over-modes (TRIP / glide / HE / segregation) — while Bridge A stays SPECULATIVE pedagogy hung only after materials.
11. What this walkthrough trains you to do next
- Ask whether the system is one-principal Fe–Mn alloying or multi-principal HEA before importing Cantor lessons wholesale.
- Name the plasticity mode from SFE (TRIP / TWIP / glide–MBIP) before talking “strength.”
- Separate composition windows (Mn–C–Al–Si → SFE) from process windows (grain size, anneal) and H/service clocks.
- Contrast vocabulary with Fe–C interstitial (shared C, different RT matrix and headline path) and Cantor (shared twinning family, different host framing).
- Hang Bridge A only after materials; treat SFE as a continuous analog, not an arity table.
- Keep Triskelion Layer C generative mappings parked relative to Layer A TWIP/TRIP facts.
12. Sources consulted (2026-09-19 note)
| Source | Role |
|---|---|
| De Cooman, Estrin & Kim Acta Mater. 142 (2018) — TWIP steels overview | REAL: composition / SFE / twinning / delayed fracture / industrial issues |
| Pierce et al. Acta Mater. 2014 — Fe–22/25/28Mn–3Al–3Si SFE | REAL: SFE ~15 / 21 / 39 mJ m⁻² with rising Mn in Al–Si frame |
| Allain et al. / Remy–Pineau lineages; Frommeyer–Grässel Fe–Mn–Al–Si TWIP | REAL: SFE(T) mode switches; classic TWIP property fame |
| Metals 2021 (TRIP/TWIP comparative); Castañeda et al. Metals 2021 XRD SFE | REAL: TRIP ≲20 / TWIP ~20–40 / MBIP ≳40 pedagogy bands + uncertainty |
| Song / Lee / De Cooman / Bhadeshia Al + H delayed fracture series (Fe–18Mn–0.6C ± Al) | REAL: Al improves delayed-fracture resistance (SFE↑, H entry, fracture-mode shifts) |
| Herbig / Raabe APT GB segregation in Fe–28Mn–0.3C TWIP | REAL: GB segregation (B, C, P, …); twin vs general GB chemistry |
| Cho / H-effect neutron and HE design papers 2024–2025 | Near-primary: H accelerates planar defects; higher SFE can improve HE resistance |
| Project-internal: Cantor HEA + Fe–C checklists; CONCLUSIONS-v1-addendum; mechanism taxonomy; chem-for-linguists; process-metastability; triskelion-refinement A3 | Stack consistency; vocabulary; Bridge A lock; TWIP/TRIP as REAL Layer A |
v0 — 2026-09-19 continue-research. Real metallurgy walkthrough: austenitic Fe–Mn TWIP; SFE window as design meter. Bridge A flagged SPECULATIVE pedagogy only (SFE as saturation analog; risks flagged). No joint field.
Corpus note: worked-twip-steel-checklist-v0.md. Materials first; Bridge A peg last.