No joint field · Bridge A = SPECULATIVE pedagogy

Labels: SOURCED HYPOTHESIS SPECULATIVE OPEN NONE (REAL = same-domain materials or linguistics, shown like SOURCED)

Path C · Host checklist

Worked walkthrough — Mg (HCP) host through the alloy-design checklist

  1. 1 Diagram
  2. 2 Mechanism
  3. 3 Failure past the window
  4. 4 Metastability
  5. 5 SPECULATIVE Bridge A peg

What’s claimed and how well supported

Labels on this page
SPECULATIVE ×9
Strongest label used
SPECULATIVE
Main caveat (quoted)
Locks: Bridge A locked as ◆ SPECULATIVE supporting case only.

Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.

Terms on this page (12), plain-language definitions
Host (matrix)
Majority element/phase whose lattice dominates the material.
HCP
Hexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.
Valence (chem.)
Bonding capacity / oxidation-related electron count of an atom in context.
Solute
Intentional minority species dissolved in the host (alloying addition).
Dopant
Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
FCC
Face-centered cubic — many slip systems; Al, Cu, Ni typically ductile.
Dislocation
Line defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries.
Precipitate
Second-phase particle that forms (often on aging) and blocks dislocations.
Work hardening
Strength rise from cold deformation via dislocation multiplication/tangling.
Valency (ling.)
Arity: how many actants a predicate takes; formal vs semantic valency can diverge.
Solid solution
Solute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase.
BCC
Body-centered cubic — Fe/steel common; plasticity more temperature-sensitive.

Definitions quoted from the Chem for linguists primer glossary.

Materials first. The cross-domain peg stays last, and it stays SPECULATIVE.

Date: 2026-09-19 (continue-research; after Al–Mg / Cu–Ni / Fe–C / Ni–γ′)
Audience: syntax/semantics readers building alloy-design literacy (Chem for linguists)
Purpose: Execute a Mg-alloy hostMajority element/phase whose lattice dominates the material. walkthrough with the same checklist discipline as Al–Mg, Cu–Ni, Fe–C, and Ni–γ′.
Locks: Bridge A locked as SPECULATIVE supporting case only. Materials facts first; linguistic parallels only in a flagged box. No joint-field claim. Dowty / Triskelion / Merge·Agree / kanji / Navajo θ-typing not advanced here.

Companion notes: Solubility windows; Al / Cu / Fe–C / Ni–γ′ worked checklists; Chem for linguists §1 (HCPHexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.) + §8; Chemical interaction vs valence effect (Chen–Boyle Mg “valenceBonding capacity / oxidation-related electron count of an atom in context. effect” false friend); Conclusions §3–§5.


0. Design brief (problem-driven)

Slot Choice
Host Magnesium (HCP α-Mg)
Candidate alloy families Commercial AZ (Mg–Al–Zn), AM (Mg–Al–Mn), ZK (Mg–Zn–Zr); RE-bearing cast/wrought grades (WE / AE class) as the elevated-T / ignition-resistant cousin
Named weakness of pure Mg Soft + poor RT formability: basal ⟨a⟩ slip has very low CRSS; non-basal slip (prismatic / pyramidal ⟨c+a⟩) is hard; basal slip alone cannot satisfy von Mises (need ≥5 independent systems) → strong plastic anisotropy, twinning-dominated paths, limited ductility
Intended mechanism Mix of substitutional SSS (Al, Zn, RE, …) + precipitation (β-Mg₁₇Al₁₂ in AZ; Mg–Zn β′/β″ sequences in ZK) + grain refinement (Zr in ZK; Al-driven dendrite refinement) + optional texture / non-basal slip activation. Not semiconductor electronic doping
Service hint Lightweight structural castings (die cast AZ91 / AM60 class), wrought sheet/extrusion (AZ31 / ZK60 class), biomedical / ignition-sensitive niches — density, strength, castability, corrosion trade-offs

Words like “doped Mg” are avoided for structural Mg alloys — Al/Zn/RE are solutesIntentional minority species dissolved in the host (alloying addition). / alloying additions. Reserve “dopantIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.” for dilute electronic (etc.) intent unless a paper’s electronic goal is explicit.

Hard contrast to prior checklists: Al–Mg (AA5083) was Mg as solute in FCCFace-centered cubic — many slip systems; Al, Cu, Ni typically ductile. Al. Here Mg is the host. Same β-Mg₁₇Al₁₂ stoichiometry family appears, but roles invert: in AZ casting alloys β can be a strength / barrier phase or a galvanic cathode / creep liability — not the AA5083 sensitization story.


1. Chem-for-linguists checklist (§8) — filled

1. What is the inherent weakness of the pure / base form?

Pure / dilute Mg is light (density ~1.74 g/cm³) but soft and hard to form at RT. HCP Mg activates basal ⟨a⟩ slip easily (CRSS lore ~0.5 MPa class) while prismatic / pyramidal systems sit ~orders of magnitude higher at RT; basal slip supplies only two independent systems and cannot accommodate c-axis strain. Extension twinning helps but does not fix polycrystal formability alone. Design goal: raise strength and/or activate non-basal modes / weaken texture while keeping castability and corrosion usable.

2. Which obstacle mechanism is doing the work?

Depends on family + process, not on “add solute” alone:

Path Mechanism (name it)
Dilute Al / Zn / RE in α-Mg Substitutional SSS — size + chemical (stacking-fault) misfits pin basal dislocationsLine defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries. (Yasi–Hector–Trinkle / Curtin-line); Chen–Boyle is a bonding correlate, not a separate mechanism name
AZ91-class (≳~6 wt% Al, cast) β-Mg₁₇Al₁₂ discontinuous / continuous precipitation + SSS in α; grain refinement from Al
ZK60-class Zn SSS + age sequence toward β₁′ / β₂′ (Mg₄Zn₇ / MgZn₂-related lore) + Zr grain refinement
RE / Y / Ca grades SSS + thermally stable precipitatesSecond-phase particle that forms (often on aging) and blocks dislocations.; oxide-scale chemistry for ignition/oxidation
Wrought processing Work hardeningStrength rise from cold deformation via dislocation multiplication/tangling. + texture evolution; solutes that raise basal CRSS or ease ⟨c+a⟩ / prismatic slip improve ductility

Explicitly not: Mott-style impurity-band electronic doping as the design language for structural Mg.

3. What trade-offs are accepted?

  • Higher Al ↑ strength / castability / hardness, but ↓ ductility; β low melting (~437 °C eutectic) → creep / warm-service collapse above ~120 °C class for classic AZ/AM.
  • Higher Zn ↑ SSS / age hardening, but excess → hot cracking / ductility loss; Zn–Zr compounds can lock Zn out of solution.
  • RE ↑ elevated-T strength / ignition resistance, but cost.
  • Density win is the headline asset; corrosion (esp. Cl⁻, galvanic couples) and ignition/oxidation are the headline liabilities vs Al alloys.

4. How critical is processing vs nominal composition?

Very. Composition sets solvus ceilings and which second phases are allowed. Whether β is a fine strengthening dispersion, a continuous barrier network, or a coarse brittle/galvanic particle depends on solidification rate (HPDC vs sand), solution treatment, aging T–time, and impurity control (Fe, Ni, Cu limits for “high-purity” AZ91D). Composition alone does not “use up” the window.

5. Problem-driven or exploratory?

Problem-driven: buy density (and often castability) that Al/Fe cannot match for a named duty, then stay inside the formability / corrosion / ignition / warm-strength envelope for that family.


2. Host Mg (HCP) — why alloying matters

2.1 Slip-system bottleneck (REAL)

Mode Role at RT Design pressure
Basal ⟨a⟩ {0001}⟨11̄20⟩ Soft; dominant Need obstacles (SSS / precipitates / grain boundaries) or texture control so soft orientations aren’t catastrophic
Prismatic ⟨a⟩ Harder; helps in-plane ductility when activated Solutes (Zn lore; RE) can soften relative to basal or change CRSS ratio
Pyramidal ⟨c+a⟩ Needed for c-axis strain; CRSS much higher than basal Activate via solute / SFE / multicomponent binding (Sandlöbes Mg–Y line; Jang–Lee / Curtin-line modeling)
{10̄12} extension twinning Common secondary mode Helps reorient grains; not a full substitute for five independent slip systems

Pedagogy sentence (chem-for-linguists §1): FCC Al/Cu/Ni have many symmetry-related slip systems → usually ductile; HCP Mg has fewer easy systems → alloying is not optional decoration, it is how you change which systems run and how hard the soft ones are.

2.2 Density as the design asset

Material Density (order)
Pure Mg ~1.74 g/cm³
AZ91D class ~1.81–1.85 g/cm³
Al alloys (typical) ~2.7 g/cm³
Steels ~7.8 g/cm³

Specific strength / cast lightweighting is why AZ91 / AM60 dominate structural Mg die casting (NADCA / open digests: AZ91D most-used Mg die-cast alloy).


3. Common solutes and commercial families (brief)

ASTM B951-style letters (pedagogy): A=Al, Z=Zn, M=Mn, K=Zr, E=RE, W=Y, … Numbers ≈ rounded wt%.

Family Typical composition lore Role
AZ (e.g. AZ31, AZ61, AZ91) Al ~3–9 wt% + Zn ~1 wt% class AZ91: highest commercial die-cast strength + castability; AZ31: wrought sheet/extrusion workhorse
AM (e.g. AM60, AM50, AM20) Al ~2–6 wt% + Mn; little/no Zn More ductility / toughness / impact than AZ91; Al↓ → ductility↑, castability/strength↓ (pick lowest Al that meets duty)
ZK (e.g. ZK60) Zn ~6 wt% + Zr ~0.5–0.6 wt% class Wrought high strength; Zr grain refinement; age-hardenable Mg–Zn sequence
WE / AE (e.g. WE43, AE42) Y+RE (± Zr); or Al+RE Elevated-T / creep + ignition-resistance niches; cost↑

Solute roles (one line each):

Solute Primary job in commercial Mg
Al Strength, hardness, castability; enables β; grain refinement on solidification
Zn SSS + precipitation hardening; ambient strength; excess → hot tearing risk
Mn Fe scavenger / corrosion hygiene (Al–Mn–Fe intermetallics); limited SSS alone
Zr Potent grain refiner in Al-free melts (ZK, WE); forms Zn–Zr compounds that can steal Zn
RE / Y / Gd / Nd SSS + stable precipitates; texture weakening; protective oxides for ignition
Ca Ignition / oxidation helper (CaO scale lore); GB segregation can embrittle if overdone

4. Explicit phase / solubility reading (diagram first)

4.1 Mg–Al — β-Mg₁₇Al₁₂

Mg–Al is a limited solid-solubility eutectic-family system on the Mg-rich side:

Fact Approximate figure Role in reading
Eutectic L → α-Mg + β-Mg₁₇Al₁₂ at ~437 °C Casting / heat-treat anchor
Max Al in α-Mg ~12.6–12.9 wt% at eutectic T High-T solution-treatment ceiling
Al in α at RT (equilibrium lore) ~0.5–2 wt% class (digests differ; falls sharply with T) Why cast AZ alloys leave non-equilibrium β; why aging is possible after solutionize
β stoichiometry Complex cubic Mg₁₇Al₁₂ (~mid-40s at% Al / ~~33–44 wt% Al class depending on notation) Strengthening particle or galvanic cathode or low-melt creep liability
Practical AZ91 ~9Al–1Zn–0.3Mn Substantial β after casting; solution ~~400–420 °C class then age

Sources: Mg forging review (Materials 2020, Mg–Al solvus/eutectic); J. Magnesium Alloys digests on β dissolution / HPDC β role; IntechOpen alloying-elements review; AM60 Thermo-Calc solidification notes (~12.6 wt% Al at 437 °C).

Reading rule: mark C0. Above ~2 wt% Al, non-equilibrium eutectic β commonly appears on casting even when equilibrium would allow single-phase α. Solution treatment can dissolve β if Al ≲ max solubility and T–time suffice; aging re-precipitates β as discontinuous (DP, often ≲150 °C lamellar GB) and/or continuous (CP, higher T) morphologies.

Contrast to AA5083: there Mg is the solute and β (Al–Mg) at GBs is a corrosion failure. Here Al is the solute and β-Mg₁₇Al₁₂ is often intentionally present for strength — but still a dual-role corrosion actor (§6).

4.2 Mg–Zn — precipitation sequence

Fact Approximate figure Role
Max Zn in α-Mg ~6.2 wt% (~2.4–2.5 at%) at ~340 °C Solutionize window for ZK-class
RT solubility Falls to ~~1–2 wt% class Driving force for aging
Age sequence (pedagogy) SSSS → GP zones → rod β₁′ (Mg₄Zn₇ / MgZn₂-related) → disk β₂′ (C14 MgZn₂ lore) → equilibrium MgZn / related Peak hardness usually at metastable rods/plates, not coarse equilibrium
Zr in ZK60 ~0.5–0.6 wt% Grain refine; Zn₂Zr-type particles can remove Zn from solution (~15% age-hardening penalty lore in some digests)

One-sentence design reading: for Mg hosts you often pick both a solvus-relative heat treat (AZ / ZK age) and a slip-system / texture strategy — not only a conductivity curve (Cu–Ni) or a TTT/Ms map (Fe–C).

4.3 Host–solute site type vs prior checklists

Host–solute story Site / phase role Design consequence
Al/Zn/RE in Mg Substitutional in HCP α; optional ordered/complex precipitates SSS + precipitation; CRSS anisotropy is first-class
Mg in Al (AA5083) Substitutional Mg in FCC Al; β unwanted Stay single-phase α for marine corrosion
Ni in Cu Substitutional complete SSS No solvus ejecting Ni second phase
C in Fe Interstitial; Fe₃C / martensite Transformation metastability
Al/Ti in Ni → γ′ Ordered coherent precipitate as strength win fγ′ + size window

5. Goal-dependent windows — name the mechanisms

“Useful window” is not one number. Name the goal first:

Goal Useful regime (materials) Mechanism to name
Density / lightweighting Mg matrix retained; avoid dense RE overload unless duty demands Intrinsic Mg density — alloying usually keeps ~1.8 g/cm³ class
Strength SSS (dilute); β or Mg–Zn precipitates at controlled size/spacing; fine grains (Zr) Dislocation pinning; Orowan / cutting depending on particle; Hall–Petch
Castability AZ91-class Al (~8–9 wt%) + controlled impurities Fluidity / feeding; eutectic fraction; die-cast process window
Ductility / formability Lower Al (AM60 / AZ31); solutes that activate non-basal slip; weaken basal texture CRSS-ratio engineering; twinning + ⟨c+a⟩
Corrosion High-purity impurity limits (Fe/Ni/Cu); continuous fine β network can barrier; coatings / surface design Galvanic microcoupling control — orthogonal to “more β = stronger”
Elevated T / creep Leave classic AZ; move to RE/Si/Ca grades with stable phases Avoid low-melt β coarsening / GB sliding
Ignition / oxidation resistance Y/Gd/Nd/Ca oxide-forming grades (WE43 class ignition lore ≫ AZ31) Protective scale vs porous MgO

6. What “over” means — not one physics

Carry the prior-host lesson: “too much” is host- and goal-dependent. For Mg:

Overrun mode What goes wrong Physics family
Brittle / coarse intermetallics Excess Al or Zn → coarse β or Mg–Zn compounds → crack paths, ductility collapse Phase / morphology
Galvanic corrosion β (or Fe-rich particles) as cathode, α-Mg as anode in Cl⁻ media; discontinuous β accelerates attack; continuous network can barrier — morphology decides Electrochemical couple
Impurity galvanic Fe, Ni, Cu above tolerance → severe localized corrosion even if Al/Zn “on spec” Cathodic impurity
Warm-strength / creep collapse (AZ/AM) β softens / melts locally above ~120–150 °C class; GB sliding Low-melt second phase
Flammability / oxidation Porous MgO loses integrity ≲~600 °C class; AZ31 ignition lore ~~600 °C (test-dependent); Al-rich low-melt capsules can worsen ignition vs RE/Ca protective scales (WE43 ~~1070 °C class in one ECAP study) Surface oxidation / melt ignition — process safety, not Bridge A evidence
Formability miss Strong basal texture + soft basal / hard non-basal → RT stamping failure even if tensile UTS looks fine Anisotropy / CRSS ratio
Zr overbind in ZK Zn locked in Zn–Zr particles → weaker age response Solute sequestration

Honest split: none of these is a Mott MIT, none is AA5083 GB-β sensitization as the Mg-in-Al story, none is Cu–Ni Nordheim conductivity collapse, none is Fe–C martensite quench cracking, none is Ni–γ′ TCP. Same Bridge A count mnemonic only at the pedagogical layer (§10).

Under (for completeness): too little Al/Zn/RE (or under-aged / coarse-grained) → soft, coarse α; miss strength / castability / non-basal activation targets.


7. Metastability / kinetics — first-class

Step State Equilibrium?
Cast / HPDC Cored α + non-equilibrium eutectic β (AZ) or Zn-rich interdendritic phases (ZK) Path-dependent; fast cool freezes segregation
Solution treatment β / Mg–Zn phases dissolve into α (if T–time and solvus allow) Approach high-T single-phase α
Age DP + CP β (AZ); β₁′/β₂′ sequence (ZK) Controlled approach toward lower-T equilibrium fraction
Service warm hold β coarsening; creep in AZ; possible further precipitation Time–temperature relaxation
Corrosion service Film growth / breakdown; galvanic attack along β networks Electrochemical kinetics, not a solvus crossing

Design rule: if the useful state is a fine precipitate distribution or a supersaturated SSS, schedule the relaxation risk (max service T, aging recipe, impurity caps). Mg adds an extra kinetics family: oxidation/ignition under hot processing or fire exposure.


8. Vocabulary hygiene

Prefer Avoid for structural Mg alloys
Substitutional solute / alloying; SSS; precipitation hardening “Dopant” / “doped Mg” (unless electronic intent is explicit)
β-Mg₁₇Al₁₂ as named phase (strength or galvanic actor — say which) Calling β an “adjunct”
SSS chemical misfit (Yasi–Trinkle / Curtin: SFE / core U) Equating with linguistic valencyArity: how many actants a predicate takes; formal vs semantic valency can diverge.
Chen–Boyle “valence effect” Reading as Hume-Rothery solubility valency, electronic doping, or θ-saturation

Chen–Boyle false-friend pointer (REQUIRED)

Chen & Boyle (2012), “Alloy solid solutionSolute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase. strengthening of Mg alloys: Valence effect” (phys. status solidi (b)): DFT DOS/ELF on Mg–RE vs Mg–Bi/In/Sn; covalent-like RE–Mg hybridization argued to correlate with observed SSS.

False friends (from Chemical interaction vs valence effect):

Phrase Means (REAL) Is not
Chen–Boyle “valence effect” Bonding-character correlate of Mg SSS Linguistic valency / θ-saturation
Curtin/Yasi “chemical misfit” Solute–dislocation / SFE contribution to strengthening Chen–Boyle’s DOS/ELF taxonomy (related family, different object)
Hume-Rothery valency Solubility / e/a heuristics A Labusch strength formula
Electronic doping Carriers in a semiconductor Metal SSS for yield

SSS vs precipitation (say it out loud): dissolved Al/Zn raising basal CRSS ≠ β or MgZn₂ particles blocking dislocations. Same alloy can use both; name which inventory is dissolved vs precipitated.


9. Bridge A add-on checklist (depth note §6) — filled

  1. Where is the solvus / solidus for this solute at process and service T?
    Mg–Al: eutectic ~437 °C; max Al in α ~12.6–12.9 wt%; low-
    T solvus much lower. Mg–Zn: max Zn ~6.2 wt% at ~340 °C. Then read cast cooling + age recipe + max service T
    — and separately read corrosion/ignition envelopes.

  2. Intended mechanism?
    Name it: SSS / β precipitation / Mg–Zn aging / Zr grain refine / non-basal slip activation / protective scale. Do not call structural Mg “electronic doping of magnesium.”

  3. What fails first past the window?
    Goal-dependent (§5–§6): brittle intermetallics, galvanic attack, creep above β stability, ignition, formability anisotropy — pick the failure that matches the named goal.

  4. Metastability?
    Yes for useful fine precipitates and supersaturated cast structures. Aging builds them; service T and corrosion media relax or attack them.

  5. Only then — SPECULATIVE Bridge A mnemonic
    See §10. Never invert: do not pick Al% or age T from a linguistic arity table.


10. Under / useful / over — materials only (no linguistics yet)

Zone Mg-host reading (strength + castability framing example)
Under Near-pure Mg: excellent density, but soft, poor RT formability, weak castability vs AZ91
Useful window Goal-relative: e.g. AZ91 for die-cast strength+fluidity; AM60 for crash ductility; AZ31 for wrought formability; ZK60 for wrought strength+age; WE43 for elevated T/ignition — always tied to process and corrosion design
Over / wrong regime Coarse brittle β / Mg–Zn networks; galvanic β morphology in Cl⁻; AZ put into >~120 °C creep duty; impurity Fe/Ni/Cu overrun; treating AZ31 as ignition-safe like WE43

SPECULATIVE Cross-domain section. Open after the materials.

11. SPECULATIVE Bridge A overlay (supporting only)

Everything in this section is pedagogical analogy. It does not make doping × θ-roles a joint field.

Materials fact SPECULATIVE Bridge A reading
Useful Al/Zn/RE% + process path for a named duty Successful “saturation” of the design configuration
Under-alloyed soft / unformable / poorly cast Mg Under-filling relative to the intended property configuration
Brittle intermetallics / galvanic overrun / wrong-regime ignition or creep Overrun: solute still “fits” a phase field, but leaves the useful property / phase cast
Continuous wt% + continuous T–time–stress + electrochemical kinetics Same asymmetry as prior hosts: composition continuous; verb arity typically discrete — do not force integer slots onto Al%
Multiple distinct “over” physics Bridge A’s count ladder is a memory peg; Mg trains that “over” includes slip-system / galvanic / ignition families, not one solvus corrosion story

Earn: expands the host set with HCP anisotropy + density-first design; shows β as wanted or unwanted depending on host (contrast AA5083).
Collapse: if basal CRSS ratios are equated with θ-saturation; if Chen–Boyle “valence” is smuggled into linguistic valency; if galvanic β is called an adjunct; if Navajo morphological typing is treated as evidence for this count story (typing stays parallel).

Explicit asymmetries (keep on the whiteboard): - Linguistics: often categorical well-formedness; Mg alloys: graded optima + anisotropy + corrosion electrochemistry + oxidation kinetics. - Continuous composition ≠ discrete lexical arity. - “Solute participants” are not θ-role fillers — metaphor only.


12. Contrast table — Mg host vs prior hosts

Mg host (this note) Al–Mg AA5083 Cu–Ni Fe–C Ni–γ′
Lattice / solute site HCP host; substitutional Al/Zn/RE FCC Al; substitutional Mg FCC; complete Ni SSS BCCBody-centered cubic — Fe/steel common; plasticity more temperature-sensitive./FCC Fe; interstitial C FCC γ; γ′-formers
Diagram family Limited solubility; Mg–Al eutectic + β; Mg–Zn age sequence Limited; solvus + β (unwanted) Isomorphous Eutectoid Fe–Fe₃C γ/γ′ solvus
Headline weakness of pure host Soft + few easy slip systems / anisotropy Soft annealed FCC Soft; guard conductivity Soft ferrite; needs hardenability Soft / creep-prone at high T
Headline “window” metric Density + strength/castability/corrosion/formability (goal-split) Solvus + service T–time + DoS Conductivity curves Transformation path (M/temper) fγ′ + size + oxidation
First “over” (typical) Brittle IMCs; galvanic β; creep; ignition; anisotropy miss GB β sensitization (IGC) Property-curve (Nordheim) Cementite networks; brittle M Overaging; TCP
Useful second phase? Sometimes (fine β / Mg–Zn) — morphology decides No — β is failure No Ni second phase (binary) Morphology-dependent carbides Yes — γ′
Metastability of useful state Cast segregation + age fine precipitates Supersaturated Mg SSS Binary α equilibrium Quench M / RA central Fine γ′ central
Bridge A second-phase peg Strong but ambivalent (β help or hurt) Strong (unwanted β) Weak / absent Strong (morphology + quench) Strong (wanted γ′ vs TCP)
Special vocabulary trap Chen–Boyle “valence effect” Sensitization lore Linde/Nordheim “valence” scattering “Dopant” misuse fγ′ ≠ dissolved solute
Vocabulary Solute / alloying; avoid “dopant” Solute; avoid “doped Al” Solute; avoid “doped Cu” Solute / alloying γ′-formers / alloying

Pedagogy takeaway: five hosts, five “over” families — phase/corrosion sensitization (Al–Mg), property-curve (Cu–Ni), transformation/metastability (Fe–C), precipitation-size/TCP (Ni–γ′), and HCP anisotropy + galvanic/ignition/IMC (Mg host). Bridge A’s under/useful/over ladder is only hung after the mechanism is named.


13. What this walkthrough trains you to do next

For any new host/solute pair:

  1. Name the host lattice and why pure form fails (slip count, conductivity, creep, …).
  2. Classify diagram family (limited vs isomorphous; eutectic; age sequence).
  3. Name the mechanism (SSS / precipitation / transformation / electronic doping / …).
  4. Name the metric that defines the useful window (density+castability vs DoS vs conductivity vs hardenability vs fγ′).
  5. Name the first failure past that window — expect plural modes on Mg.
  6. Ask whether the useful state is metastable.
  7. Audit “valence / chemical / dopant” words (Chemical interaction vs valence effect).
  8. Only then, if useful for memory, hang the SPECULATIVE Bridge A count peg.

Stacked with Al–Mg, Cu–Ni, Fe–C, and Ni–γ′: you now have five REAL host pegs on disk — including Mg as host (not only Mg-as-solute in Al) — without claiming any is linguistics.

Queued later (optional): process-metastability case study as Bridge A’s kinetics half; Grant source-PDF drops.


14. Sources consulted (2026-09-19 note)

Source Role
Yasi, Hector & Trinkle (2010) Acta Mater. / arXiv:1007.2585 REAL: Mg basal SSS size + chemical (SFE) misfits; Fleischer-type potency map; Al/Zn validation
Chen & Boyle (2012) pss (b) — “Valence effect” (via project depth note) False-friend pointer: DFT bonding correlate ≠ linguistic valency
Materials 2020 Mg forging review (Mg–Al eutectic ~437 °C; ~12.7 wt% Al max; AZ/AM/ZK families) Solvus / family pedagogy
J. Magnesium Alloys digests — β dissolution kinetics; HPDC β dual role Continuous vs discontinuous β; galvanic cathode vs barrier
IntechOpen Loukil 2021 — alloying elements review AZ/AM/ZK/WE designation; Al/Zn/Mn/Zr/RE/Ca roles
NADCA Mg alloy subsection / Azom AZ91D digest Density ~1.81; castability; impurity-limited corrosion
Acta Mater. Mg–Zn basal/pyramidal / ductility papers (2021–2022 line) CRSS anisotropy; Zn non-basal activation lore
Minárik et al. 2023 Materials (PMC9919670) — ignition temperatures AZ31 ~601 °C vs WE43 ~1072 °C class; Ca/RE protective oxides
Project-internal: CONCLUSIONS-v0; Al/Cu/Fe–C/Ni–γ′ checklists; Solubility windows; Chemical interaction vs valence effect; Chem for linguists §1, §8 Stack consistency; Bridge A lock

v0 — 2026-09-19 continue-research. Real metallurgy walkthrough; Bridge A flagged SPECULATIVE. No joint field.

Corpus note: worked-mg-host-checklist-v0.md. Materials first; Bridge A peg last.