Depth note — Allotropy / solid-state transformation windows: Fe–C · Ti · Zr (+ CoCrMo SIMT foil)
What’s claimed and how well supported
- Labels on this page
- SPECULATIVE ×9
- Strongest label used
- SPECULATIVE
- Main caveat (quoted)
- Materials first; Bridge A only after.
Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.
Terms on this page (8), plain-language definitions
- Host (matrix)
- Majority element/phase whose lattice dominates the material.
- Solute
- Intentional minority species dissolved in the host (alloying addition).
- HCP
- Hexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.
- FCC
- Face-centered cubic — many slip systems; Al, Cu, Ni typically ductile.
- BCC
- Body-centered cubic — Fe/steel common; plasticity more temperature-sensitive.
- Dopant
- Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
- Precipitate
- Second-phase particle that forms (often on aging) and blocks dislocations.
- Solid solution
- Solute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase.
Definitions quoted from the Chem for linguists primer glossary.
Date: 2026-09-22 PT
Audience: syntax/semantics readers building alloy-design literacy (Chem for linguists)
Purpose: One linguist-readable contrast of allotropy / solid-state transformation “windows” across three corpus hostsMajority element/phase whose lattice dominates the material. already filed (Fe–C, Ti, Zr nuclear) — shared surface pattern (phase change under T / rate / composition / stress), divergent physics and duty meters, and vocabulary that stays alloying / soluteIntentional minority species dissolved in the host (alloying addition). / stabilizer / SPP / carbide (never dilute electronic doping). Materials first; Bridge A only after. Prefer depth/synthesis over new hosts. A brief CoCrMo SIMT foil keeps deformation-induced γ→ε from collapsing into thermal β-transus lore.
Locks: Bridge A locked as SPECULATIVE supporting case only. Materials facts first; linguistic parallels only in a flagged box. No joint-field claim. Dowty / Triskelion / Merge·Agree / kanji / Navajo θ-typing not advanced here.
Hard separations: transformation / allotropy window ≠ electronic carrier saturation; ≠ SSS solvus overrun alone (Al–Mg β sensitization); ≠ wanted precipitation family alone (Ni–γ′ / Al–Li); shared HCPHexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic. (Ti/Zr) ≠ shared duty meters; thermal allotropy (Fe/Ti/Zr) ≠ CoCrMo deformation-induced SIMT.
Companion stack: Fe–C; Ti host; Zr nuclear; CoCrMo (SIMT foil); SFE window (SFE / SIMT); Process metastability (three clocks); Mechanism taxonomy §4 (Family 4 transformation cousin); Precipitation family (precip foil); HCP host contrast (shared HCP ≠ shared duty — cross-link, do not rewrite); Doping vs alloying vocabulary (Path D); Reading order §3–§4; Conclusions.
- 0. One-screen claim
- 1. Shared surface — and what it does not mean (REAL — read once)
- 2. Fe–C — eutectoid + quench–temper; TTT/CCT first-class
- 3. Ti — α/β allotropy; β-transus; STA as process-clock writing of α morphology
- 4. Zr nuclear — α service / β process; SPPs; β as process gate
- 5. Brief foil — CoCrMo SIMT γ→ε (deformation-induced; SFE-linked)
- 6. Hard splits — transformation window ≠ these neighbors
- 7. Three clocks — name them on every peg
- 8. Vocabulary lock (Path D — name once)
- 9. SPECULATIVE Bridge A after materials
- 10. Non-claims + what to do next
- 11. Sources / corpus pointers
0. One-screen claim
Three corpus hosts share a surface pattern — a host that can change crystal structure (or freeze a non-equilibrium product) under temperature, cooling rate, composition, and sometimes stress — without sharing one physics, one service lattice story, or one “over” meter:
| Peg | Service / process lattices | Transformation headline | Path product | Typical “over” |
|---|---|---|---|---|
| Fe–C | BCCBody-centered cubic — Fe/steel common; plasticity more temperature-sensitive. α service; FCCFace-centered cubic — many slip systems; Al, Cu, Ni typically ductile. γ process | Eutectoid Fe–Fe₃C; TTT/CCT + Ms | Austenitize → quench martensite (± RA) → temper | Cementite networks; brittle as-quenched M; temper–RA |
| Ti | HCP α / BCC β (both can be service) | β-transus; α-/β-stabilizers | Ti-6Al-4V STA writes α morphology | α-case; ω; β flecks; overaging; H embrittlement |
| Zr nuclear | HCP α service; BCC β process | α↔β gate (~810–980 °C Zircaloy lore) | β-quench / anneal resets SPPs + texture | Corrosion morphology; hydriding; LOCA breakaway; SPP fluence; growth |
| CoCrMo (foil) | Metastable FCC γ; HCP ε favored | Not thermal allotropy like Fe/Ti/Zr | SIMT γ→ε under strain (SFE-linked) | Uncontrolled ε cracks; brittle carbides; fretting/MACC |
Pedagogy in one line: “transformation window” is a family name for phase-change under T/rate/composition/stress — not one number, not electronic saturation, and not Al–Mg solvus overrun alone. Name the host, the product, and which clock before hanging under/useful/over.
Vocabulary lock (all three + foil): prefer alloying / solute / interstitial / α-/β-stabilizer / carbide / SPP / quench–temper / STA. Do not call C in steel, Al/V in Ti, Sn/Nb/Fe/Cr in Zircaloy, or Cr/Mo in CoCrMo “dopantsIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase..” Reserve dopant for dilute electronic (etc.) intent (Si:P, GaN:Mg, oxide electronic).
1. Shared surface — and what it does not mean (REAL — read once)
1.1 Shared
| Theme | What it means |
|---|---|
| More than one crystal structure is in play | Host can sit as α vs γ (Fe), α vs β (Ti, Zr), or freeze a non-diagram product (martensite, α′) |
| Path dependence | Cooling rate, quench severity, solution T relative to a transus/eutectoid, age/temper T–time decide the microstructure |
| Composition opens a door | C% sets eutectoid/Ms ceiling; Al/V set β-transus; Sn/Nb/Fe/Cr set SPP inventory — none alone “uses up” the window |
| Plural “over” | Morphology, metastability, interstitial hygiene, and service envelopes fail differently |
1.2 Not shared
| Not this | Why |
|---|---|
| One physics | Fe–C interstitial eutectoid + martensite ≠ Ti α/β STA ≠ Zr β as process gate ≠ CoCrMo strain-induced ε |
| One service lattice | Fe often α+carbides; Ti α+β both service-capable; Zr wants α in service and β mainly in fabrication |
| One “over” | Cementite networks ≠ α-case ≠ LOCA breakaway ≠ SIMT crack paths |
| Electronic carrier saturation | No n/p design language for these structural hosts |
| Permission to say “doped steel/Ti/Zr” | Path D: alloying — never dilute doping |
Design rule (unchanged): diagram → name mechanism / product → name failure past the window → which of the three clocks (Process metastability) → only then SPECULATIVE Bridge A count mnemonic.
2. Fe–C — eutectoid + quench–temper; TTT/CCT first-class
Pointer: Fe–C. Three-clock cousin: Process metastability §2.2. Family 4 transformation cousin: Mechanism taxonomy §4; precip foil: Precipitation family.
What it is (REAL)
Engineering steels are usually read on the metastable Fe–Fe₃C diagram. Carbon is an interstitial in iron. BCC α-ferrite holds almost no C at RT (~0.022 wt% max near the eutectoid T ~727 °C). FCC γ-austenite can dissolve far more (~2.14 wt% at ~1147 °C). At the eutectoid (~0.76–0.80 wt% C, ~727 °C), slow-cooled γ → pearlite (α + Fe₃C). On rapid quench, diffusion is suppressed → martensite (BCT, C-supersaturated) ± retained austenite (RA) — a product that does not appear as an equilibrium phase field. As-quenched martensite is usually too brittle → temper precipitatesSecond-phase particle that forms (often on aging) and blocks dislocations. carbides and recovers toughness.
What is “saturated” / useful
Goal-relative and path-tied: e.g. medium-C quench+temper for shafts; eutectoid pearlite for some rails; controlled temper hardness for tools. “Useful” means the intended microstructure after a named thermal path (TTT/CCT + Ms + temper), not a single C% on a solvus line.
What “over” looks like (plural)
| Overrun mode | What goes wrong |
|---|---|
| Proeutectoid cementite networks | Hypereutectoid + slow cool → brittle GB Fe₃C path |
| As-quenched high-C martensite | Extreme hardness / residual stress / quench cracking; unusable toughness |
| Wrong temper / TME | Tempered-martensite embrittlement; interlath cementite from RA decomposition |
| Uncontrolled retained austenite | Dimensional instability; soft spots; later fresh untempered M |
| Weld HAZ / hardenability miss | Hard untempered M without PWHT; or soft core if hardenability too low for section |
Which clock
| Clock | Fe–C reading |
|---|---|
| Diagram | Fe–Fe₃C: α/γ solubility; eutectoid; hypo-/hyper- split |
| Process | Austenitize → quench → temper; TTT/CCT + Ms; section size / quench severity |
| Service | Further carbide coarsening; RA instability; strain-aging niches |
Kinetic one-liner: austenitize dissolves C into γ; quench freezes supersaturated martensite; temper schedules the relaxation. Diagram alone does not draw martensite.
Vocabulary
Interstitial alloying / hardenability / quench–temper / carbide — never “doped iron” or “electronic doping of steel.”
3. Ti — α/β allotropy; β-transus; STA as process-clock writing of α morphology
Pointer: Ti host. HCP constraint family (do not rewrite): HCP host contrast. This section also partially closes the open optional polish “Ti STA in process-metastability” by teaching STA as process-clock writing of α morphology — without requiring a rewrite of Process metastability in this note.
What it is (REAL)
Pure Ti is allotropic: HCP α below ~882 °C, BCC β above. Alloys speak α / α+β / β families keyed to β-transus T_β and α-/β-stabilizers, not to a Fe–Fe₃C eutectoid. Workhorse Ti-6Al-4V (~6 wt% Al + 4 wt% V) has T_β in the ~980–1000 °C class (O-sensitive). Al (and O/N/C) are α-stabilizers; V (and Mo/Nb/…; Fe/Cr/Mn/H eutectoid-type) are β-stabilizers. Commercial product states include mill anneal and STA (solution treat + quench + age).
STA as process clock (teach this): for Ti-6Al-4V-class STA, solution is typically below T_β (e.g. AMS 4965-class lore ~913–954 °C / ~1–2 h), water quench captures metastable β / α′ (hexagonal martensite-class), then age (~524–552 °C / 4–8 h class) grows fine secondary α. Strength rises vs mill anneal because the process path wrote α morphology and spacing — same nominal chemistry, different clocks. β-anneal above T_β is a different morphology menu (lamellar / colony engineering), not “more solute.”
What is “saturated” / useful
Goal-relative: enough α-/β-stabilizer balance + interstitial hygiene for the duty (specific strength, fatigue, toughness, implant passivity), with a named HT that yields the intended α morphology (equiaxed / bimodal / lamellar) and β fraction. Not one Al% or one V%.
What “over” looks like (plural)
| Overrun mode | What goes wrong |
|---|---|
| α-case | O-rich brittle surface α after elevated-T air exposure → fatigue/ductility loss until removed |
| ω embrittlement (esp. metastable β) | Isothermal ω overgrowth → slip localization / low ductility |
| β flecks | Fe/Cr-rich segregation pockets → local property soft spots |
| Overaging / wrong STA | Coarse secondary α; lost STA strength; Ti₃Al (α₂) paths on Al-rich wrong age |
| Hydrogen embrittlement | Hydrides from processing H pickup (mill limits often ~150 ppm H class for Ti-6Al-4V) |
| Wrong-regime high T | Classic Ti-6Al-4V continuous duty above ~350–400 °C class leaves for near-α families |
Which clock
| Clock | Ti reading |
|---|---|
| Diagram | α/β fields; T_β; stabilizer maps |
| Process | Solution T vs T_β; cool rate; STA age; atmosphere (vacuum/inert vs air → α-case) |
| Service | Continuous T/oxidation; H pickup; overaging under warm duty |
Kinetic one-liner: solution sets the β/α′ slate relative to T_β; quench captures metastability; age writes fine α. Composition opens the door; STA walks through it.
Vocabulary
α-/β-stabilizer / alloying / STA / interstitial hygiene — never “doped titanium.” O/H are controlled interstitials, not electronic dopants.
4. Zr nuclear — α service / β process; SPPs; β as process gate
Pointer: Zr nuclear. Shared HCP themes vs divergent duty: HCP host contrast (cross-link only).
What it is (REAL)
Nuclear cladding / pressure-tube Zr alloys (classic Zircaloy-2/4; Zr–2.5Nb; modern Nb/Sn/Fe variants) run HCP α in service (LWR ~300 °C waterside class) and use BCC β mainly as a process gate. Zircaloy lore: α+β begins ~~810 °C; complete β ~~980 °C. β-quench / anneal paths reset SPP size distributions and texture — they are fabrication tools, not “run the cladding as β in the core.” Headline assets: low thermal-neutron absorption (pure Zr ~0.18 barn; Zry-4 ~0.22 barn class), protective ZrO₂, mechanical integrity under fluence — bought with Sn/Nb/O SSS + SPPs (Zr(Fe,Cr)₂, Zr₂(Fe,Ni), β-Nb, …) + texture control + low Hf.
What is “saturated” / useful
Goal-relative to reactor duty: on-spec Sn/Nb/Fe/Cr/O + fine protective SPPs + texture that keeps irradiation growth, creep, hydride orientation, and waterside corrosion inside the envelope for BWR/PWR/CANDU-class service — plus separate LOCA / high-T steam margins. Not “max Nb” or “max β fraction in service.”
What “over” looks like (plural)
| Overrun mode | What goes wrong |
|---|---|
| Nodular / accelerated uniform corrosion | Wrong SPP size/chemistry or water chemistry → oxide runaway |
| Hydriding / DHC | H pickup → hydride platelets; radial orientation embrittles hoop |
| LOCA breakaway | High-T steam oxidation envelope — different from normal waterside |
| SPP fluence evolution | Irradiation dissolves/amorphizes Fe–Cr SPPs → late-life H/growth acceleration even when as-fab chemistry was on spec |
| Irradiation growth / bow | Anisotropic dimensional change from texture + fluence |
| Hf poison | Neutron economy collapse if reactor-grade hygiene fails |
Which clock
| Clock | Zr reading |
|---|---|
| Diagram | α/β fields; SPP-allowed chemistries |
| Process | β-quench / anneal; SRA vs RXA; cold work; texture; surface finish |
| Service | Waterside corrosion + H; irradiation growth/creep; SPP evolution; LOCA as separate high-T envelope |
Kinetic one-liner: β is often a process gate that writes SPP/texture state; α is the service lattice. Do not collapse “Zr has allotropy” into “Zr service product = β” the way Ti STA may intentionally use metastable β/α′ on the way to fine α.
Vocabulary
Alloying / solute / SPP / stabilizer / reactor-grade hygiene — never dilute doping of α-Zr. Oxide-film “Fe doping” talk (zirconia scale electrochemistry) ≠ Family 1 doping of the metal (Doping vs alloying vocabulary).
5. Brief foil — CoCrMo SIMT γ→ε (deformation-induced; SFE-linked)
Pointers: CoCrMo; SFE window.
Biomedical Co–Cr–Mo (ASTM F75/F1537-class) often retains metastable FCC γ at RT while HCP ε is thermodynamically favored below ~900 °C class. The headline transformation for wear is strain-induced martensitic transformation (SIMT) γ→ε under tribological / plastic strain, driven by very low / negative stacking-fault energy (SFE) — not a furnace β-transus schedule like Ti or Zr, and not Fe–C austenitize→oil-quench pedagogy.
| Fe / Ti / Zr thermal allotropy | CoCrMo SIMT | |
|---|---|---|
| Trigger | T, cool rate, composition relative to eutectoid / β-transus | Stress / strain (+ SFE / N / Ni levers) |
| Map language | TTT/CCT; β-transus; α↔β | SFE window; Shockley partials; ε vs twinning |
| Design fame | Quench–temper; STA α morphology; β process gate | Wear-surface ε hardening; fracture risk if uncontrolled |
Do not collapse: SIMT ≠ β-transus; CoCrMo implant duty ≠ Fe–C rail/shaft HT ≠ Ti STA ≠ Zr cladding β-quench. Shared word “martensite” is a pedagogical rhyme, not identity.
6. Hard splits — transformation window ≠ these neighbors
6.1 ≠ Electronic doping (Family 1)
| This note (Fe–C / Ti / Zr) | Si / GaN:Mg / oxide | |
|---|---|---|
| Headline meter | Strength / morphology / corrosion–H / neutron+waterside | Carrier density / mid-gap / TCO |
| Prefer saying | Alloying / stabilizer / SPP / carbide | Dopant / donor / acceptor |
| “Over” | Cementite / α-case / hydriding / breakaway | Mott / self-comp / recombination |
Pointer: Electronic doping family. Continuous wt% / T / rate ≠ N_D/N_A carrier ladder.
6.2 ≠ SSS solvus overrun alone (Al–Mg sensitization)
Al–Mg AA5083 “over” is often warm-service GB β from a supersaturated SSS — a service clock of Family 3 solid solutionSolute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase., not Fe–C martensite path dependence and not Ti STA writing of α. Same three-clock intuition (Process metastability); different mechanism. Pointer: Al–Mg.
6.3 ≠ Wanted precipitation family alone (Ni–γ′ / Al–Li)
| Wanted precip (Ni–γ′ / Al–Li) | Fe–C quench product | Ti STA | Zr β | |
|---|---|---|---|---|
| Intent | Fine coherent γ′ or T₁/δ′ as strength win | Metastable path-dependent M → temper | Write α morphology | Often process gate, not service product |
| Classic “over” | Overaging / TCP / toughness–SCC | Cementite networks / brittle M / RA | α-case / ω / overage | Corrosion / hydride / breakaway / SPP fluence |
Pointer: Precipitation family. Fe–C is already filed there as a transformation cousin — keep that framing; do not rename martensite as “carbide doping.”
6.4 Shared HCP (Ti / Zr) ≠ shared duty meters
Already taught in HCP host contrast: limited slip, texture, O/H interstitial sensitivity are a constraint family. Ti’s α-case / STA strength story and Zr’s neutron + hydriding + growth story remain unshared. Cross-link; do not rewrite.
6.5 Thermal allotropy ≠ SFE–SIMT
See §5. Point SFE readers to SFE window rather than importing β-transus language into CoCrMo.
7. Three clocks — name them on every peg
Reuse Process metastability without replacing it:
| Clock | Fe–C | Ti | Zr nuclear |
|---|---|---|---|
| Diagram | Fe–Fe₃C eutectoid / solubility | α/β + T_β | α/β + SPP-allowed chemistries |
| Process | Austenitize–quench–temper; TTT/CCT | Solution vs T_β; STA age; atmosphere | β-quench/anneal; SRA/RXA; texture |
| Service | Temper hold / RA / aging | Continuous T; H; overaging | Waterside + H + fluence; LOCA separate |
Pedagogy takeaway: same composition can be useful on the diagram, useful after the HT path, and “over” after service — three verdicts. Ti STA is the clearest corpus exhibit that process writes morphology the diagram alone does not draw; Zr is the clearest exhibit that β can be process-only.
8. Vocabulary lock (Path D — name once)
| Context | Prefer | Avoid |
|---|---|---|
| Fe–C | Interstitial alloying; quench–temper; carbide; hardenability | “Doped steel”; electronic doping of Fe |
| Ti | α-/β-stabilizer; STA; alloying; interstitial hygiene | “Doped Ti”; calling O a dopant for structural grades |
| Zr | Solute; SPP; alloying; reactor-grade | Dilute doping of α-Zr; collapsing oxide-film “Fe doping” into Family 1 |
| CoCrMo foil | Alloying; SIMT; SFE; carbide morphology | Equating SIMT with β-transus HT |
| Si/GaN/oxide | Dopant | Importing that word onto percent-level metal solutes |
Full Path D: Doping vs alloying vocabulary.
SPECULATIVE Cross-domain section. Open after the materials.
9. SPECULATIVE Bridge A after materials
Everything in this section is pedagogical analogy. It does not make doping × θ-roles a joint field.
| Materials fact | SPECULATIVE Bridge A reading |
|---|---|
| Useful quench+temper / STA α morphology / on-spec SPP+texture cladding | Successful “saturation” of a named process+service configuration |
| Under-C / under-quench / under-solution vs T_β / coarse or missing SPPs | Under-filling relative to that configuration |
| Cementite networks; brittle M; α-case; ω; hydriding; LOCA breakaway; SPP fluence; SIMT cracks | Plural “over” modes — count ladder is a memory peg, not one physics |
| Continuous wt% C / Al / Sn–Nb; continuous T, cool rate, fluence | Continuous composition–kinetics space ≠ discrete linguistic arity — do not force integer slots onto TTT noses or β-transus margins |
| Fe–C / Ti / Zr as transformation-window pegs | Hang Bridge A only after naming host + product + clock; never equate Mott MIT, GB-β sensitization, and martensite |
| CoCrMo SIMT foil | Separate deformation-induced window — do not merge into thermal allotropy count story |
Earn: one depth note that forces the reader to say which host (eutectoid quench–temper / β-transus STA / α-service β-process / SIMT foil), which product, and which clock before using under/useful/over.
Collapse: if martensite ≡ θ-saturation; if β-transus ≡ arity cutoff; if SPP fluence ≡ adjunct licensing; if Navajo morphological typing is treated as evidence; if “transformation saturation” is treated as identical to electronic or SSS saturation; if a joint field is announced.
Explicit non-equations:
- wt% C / Al / Sn–Nb / cool rate ≠ θ-role fillers.
- TTT nose / β-transus / LOCA breakaway ≠ over-arity as science identity.
- Process vs service clocks ≠ synchronic/diachronic linguistics (mnemonic only if used — collapse if elevated).
- Bridge A lock unrevised ( SPECULATIVE pedagogy / probe only). No joint field.
10. Non-claims + what to do next
Non-claims: no joint field of doping × θ-roles; this note does not promote Bridge A to identity science; Fe–C / Ti / Zr / CoCrMo do not become electronic-doping hosts by sharing the word “transformation”; shared HCP does not unify Ti and Zr duty meters; CoCrMo SIMT is not thermal allotropy.
Reader checklist:
- Open the three host checklists (+ CoCrMo foil if SIMT confusion bites); do not invent numbers past them.
- Name eutectoid quench–temper vs β-transus STA vs α-service/β-process vs SFE–SIMT before comparing windows.
- Name which of the three clocks (diagram / process / service).
- List the plural “over” modes for that host — do not stop at “too much solute.”
- Audit vocabulary (Path D): alloying here; dopant only for Family 1.
- Cross-link HCP contrast, precip family contrast, electronic Family 1 contrast, and SFE window — do not merge them.
- Treat Ti STA here as the process-metastability exhibit for α-morphology writing (partial close of optional “Ti STA subsection” polish — full subsection in Process metastability still optional later).
- Only then, if useful for memory, hang the SPECULATIVE Bridge A count peg.
11. Sources / corpus pointers
| Source | Role |
|---|---|
| Fe–C | REAL: Fe–Fe₃C eutectoid; martensite/temper; TTT/CCT; plural “over” |
| Ti host | REAL: α/β; T_β; Ti-6Al-4V STA; α-case / ω / H |
| Zr nuclear | REAL: α service / β process; SPPs; hydriding; LOCA; growth |
| CoCrMo | REAL: SIMT γ→ε; SFE; carbide foil |
| SFE window | SFE continuous window; keep SIMT out of β-transus |
| Process metastability | Three clocks; Fe–C §2.2; Ti STA reuse |
| Mechanism taxonomy §4 | Family 4 transformation cousin |
| Precipitation family | Wanted precip foil; Fe–C nod |
| HCP host contrast | Shared HCP ≠ shared duty (Ti/Zr) |
| Electronic doping family | Family 1 hard split |
| Al–Mg | Al–Mg SSS sensitization foil |
| Doping vs alloying vocabulary | Path D vocabulary lock |
| Conclusions | Sixteen-host table; Bridge A lock |
| Reading order §3–§4 | Structural spine + cross-cuts |
v0 — 2026-09-22 PT. Real allotropy / transformation-window contrast across Fe–C · Ti · Zr (+ CoCrMo SIMT foil); Bridge A flagged SPECULATIVE. Transformation ≠ electronic doping ≠ SSS solvus overrun ≠ wanted precip alone. Thermal allotropy ≠ SFE–SIMT. Shared HCP ≠ shared duty. No joint field.
Corpus note: depth-allotropy-transformation-window-v0.md. Cross-domain mappings are speculative.