No joint field · Bridge A = SPECULATIVE pedagogy

Labels: SOURCED HYPOTHESIS SPECULATIVE OPEN NONE (REAL = same-domain materials or linguistics, shown like SOURCED)

Path E · Materials scout (refractory HEAs: how much oxygen, and what happens past it)

Oxygen added on purpose, and how much a group IV–V refractory alloy takes: a dose window in TiZrNbHfTa and NbTiZr — materials scout,

What’s claimed and how well supported

Labels on this page
STRONG ×18 HYPOTHESIS ×1 WEAK ×9 SPECULATIVE ×6 NONE ×10
Strongest label used
STRONG
Main caveat (quoted)
The Bridge A section comes after the materials and is ◆ SPECULATIVE.

Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.

Terms on this page (8), plain-language definitions
Dopant
Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
Solute
Intentional minority species dissolved in the host (alloying addition).
Dislocation
Line defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries.
Solid solution
Solute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase.
BCC
Body-centered cubic — Fe/steel common; plasticity more temperature-sensitive.
HCP
Hexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.
Valency (ling.)
Arity: how many actants a predicate takes; formal vs semantic valency can diverge.
Host (matrix)
Majority element/phase whose lattice dominates the material.

Definitions quoted from the Chem for linguists primer glossary.

Date: 2026-10-27 PT (weekday research push, evening)
Status: Materials scout. The metallurgy is same-domain description from the sources opened below (REAL inside physical metallurgy). Grades and cross-source comparisons are my analysis. The Bridge A section comes after the materials and is SPECULATIVE. Not a correlate. Not a joint field.
Audience: Grant (syntax/semantics; less chemistry). End goal: designing new metal alloys. Takes up open question OQ1 ("Oxygen varied on purpose in TiZrHfNbTa") of Trace oxygen and nitrogen leave the solution: age softening in TiVNbTa §5, and through it the oxygen test idea of HfNbTaTiZr: where the screw plateau would be, and what is measured §4.
Source substitution, stated plainly: the journal article named as the first candidate (Iroc et al. 2022, Mater. Des. 223: 111239) still could not be opened (§1.2). What was opened is the M.S. thesis behind it (İroç 2022, METU, open repository), which reports the same design (an un-doped and a 2 at.% O-doped Ti25Zr35Nb20Hf5Ta15) but is not the published paper; the paper's abstract (read) already differs from the thesis on two points (§3). A second source, Beaudry et al. 2024 (Sci. Adv.), gives what the thesis cannot: oxygen levels from 0 up to the point where the alloy stops being one phase — but in a different alloy (equimolar NbTiZr, with HfNbTiZr as a check) and with oxygen taken up from air at 1050 °C, not added in the melt.
Vocabulary lock kept: Ti, Zr, Nb, Hf, Ta are principal elements (5–35 at.% each), not dopantsIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase. (Doping vs alloying vocabulary). Oxygen is an interstitial soluteIntentional minority species dissolved in the host (alloying addition).. The sources call the 2 at.% addition "oxygen doping"; I keep their word in quotes and do not treat it as a doping concentration in the semiconductor sense.
Does not: claim that an oxygen atom, cluster, phase or dislocationLine defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries. is an argument, operator, slot, feature bundle or theta role; supply a chemical stand-in for a theta role; invent numbers or quotes; revise Bridge A.

Why this note. The last note ended on a design flag: strength that comes from trace oxygen in a Ti-bearing refractory alloy is not a fixed asset. The obvious next question for alloy design is the dose question: if you add oxygen on purpose, how much does the alloy take while staying one solid solutionSolute atoms dissolved into the host lattice (substitutional or interstitial) without a separate precipitate phase. and getting stronger, and what happens past that amount?

The case, in plain words. Two kinds of evidence. (1) A design study that melts the same five-element alloy twice, once with no added oxygen and once with 2 at.% oxygen (added as TiO₂ powder), and compares structure, hardness and compression. (2) An oxidation study that lets air push oxygen into NbTiZr at 1050 °C, so that one sample holds a gradient of oxygen contents from the inside out, and reads off what forms at each level, with simulations at set oxygen levels alongside.

What is new (one sentence). At 2 at.% added oxygen, cast Ti25Zr35Nb20Hf5Ta15 stays a single disordered bcc phase ( STRONG as observed, XRD + SAED; oxygen content itself not measured, WEAK as a dose) and its hardness rises from 321 to 440 HV (≈37%, STRONG as measured), with 1240 ± 50 MPa compressive yield and no fracture by 35% strain ( STRONG as measured, but strain is "relative" and the un-doped yield was not measured, so the yield gain from oxygen is NONE in this source); in NbTiZr the oxygen dose has three regimes — metal–metal ordering "negligible up to 2 at % O" in simulation ( STRONG as computed), a still-bcc base metal at 6.7 at.% O holding sub-nanometre O–Zr-rich domains and 3.7× the hardness of oxygen-free NbTiZr ( STRONG as measured, one alloy, nanoindentation), and spinodal break-up into two phases with a computed threshold of about 8–10 at.% O ( STRONG as computed; that 6.7 at.% is the measured solubility limit, WEAK) — so a single-phase oxygen ceiling is now located for one group IV–V alloy at one temperature, while a ceiling past which ductility is lost is still NONE in any opened source, and the position of the window in TiZrHfNbTa beyond 2 at.% is NONE.


1. Sources

1.1 Opened this run

Key Source How read Used for
I1 İroç, Lütfi Koray, Development and production of ductile TiZrNbHfTa refractory high entropy alloy system for extreme environments, M.S. thesis, Middle East Technical University, 2022 (advisors E. Aydoğan Güngör, Y. E. Kalay); OpenMETU handle 11511/95251 Repository PDF ("koray thesis son.pdf", 139 pp., HTTP 200 on the fifth try; the server timed out four times first) → lit/_pdfs/hea-oxygen/iroc2022-thesis.pdf; text layer by pdftotext -layout → iroc2022-thesis.txt. Figures not inspected (numbers below are from the prose and Tables 4.4–4.6) Design route; compositions; how oxygen was added; phases as cast; lattice parameter; hardness and compression; heat-treatment and in-situ phase changes 600–1100 °C
I2 Iroc, Tukac, Tanrisevdi, El-Atwani, Tunes, Kalay & Aydogan, "Design of oxygen-doped TiZrHfNbTa refractory high entropy alloys with enhanced strength and ductility," Mater. Des. 223 (2022) 111239 Abstract only, from the OpenAlex record → lit/_pdfs/hea-oxygen/iroc2022-matdes-abstract-openalex.txt Only to show where the paper differs from I1
B1 Beaudry, Waters, Valentino, Foley, Anber, Rakita, Brandenburg, Couzinié, Perrière, Aoki, Knipling, Callahan, Redemann, McQueen, Opila, Rondinelli & Taheri, "Exceptional hardness in multiprincipal element alloys via hierarchical oxygen heterogeneities," Science Advances 10 (2024) eado9697, doi:10.1126/sciadv.ado9697 (CC BY-NC 4.0) Europe PMC full-text XML (PMC11414729; HTTP 200), tags stripped → lit/_pdfs/hea-oxygen/pmc11414729.txt (XML kept beside it). Figures and supplement (fig. S1–S9, tables S1–S2) not seen Oxygen levels vs short-range order, clustering, spinodal threshold; hardness per regime; HfNbTiZr check
(re-used) L1 (Liu et al. 2023) from 2026-10-26 (lit/_pdfs/hea-oxygen/liu2023-pmc.txt) Capture only Contrast in §3

Weakness of the copies, stated plainly. I1 is a thesis, not peer-reviewed, and it predates the paper; where the two differ the paper may be the corrected version. I2 is an abstract. B1 is the repository XML; figure-only numbers are not used.

1.2 Not opened (do not treat as read)

  • Iroc et al. 2022 Mater. Des. body. ScienceDirect article page: headless Chrome got a bot-check page; the PDF link returned HTTP 403 to curl; WebFetch returned HTTP 400; the OSTI record (1893195) has no full text; the OpenMETU record for the article (11511/100239) lists no file. Not routed around. Still the right target for a session with a real browser.
  • Lei et al. 2018 (Nature 563: 546–550, ordered oxygen complexes in TiZrHfNb) and Lei et al. 2020 (Sci. Adv., Snoek-type damping): enter only as I1 restates them.
  • Borges, Ritchie & Asta 2026 (Acta Mater. 122024): not retried tonight.
  • B1's ref. 2 (the oxygen-free NbTiZr hardness the "3.7×" is measured against): not opened.

2. Sourced materials

2.1 How the oxygen got in, and how much (I1)

  • Design: from 126 equiatomic five-element candidates, filtered by mixing enthalpy, size mismatch δ, Ω, density and VEC < 4.4, I1 settles on Ti-Zr-Nb-Hf-Ta and then "The stoichiometry was further optimized as Ti25Zr35Nb20Hf5Ta15"; base-alloy rule-of-mixtures values "3.406 Å, 8.28 g/cm3, and 2117 °C".
  • The oxygen step is copied from Lei et al.: "the designed composition was adjusted as 98 at% of the alloy, and 2 at% oxygen to form the oxygen-doped alloy"; "(Ti25Zr35Nb20Hf5Ta15)98O2 alloy is denoted as oxygen-doped alloy (OA)".
  • Route: "oxygen was introduced into the system as TiO2 powder"; vacuum arc melting, "re-melted 5-8 times", suction cast; as-cast only.
  • Measurement of the dose: "oxygen concentration is not provided due to the low accuracy of EDS analyses for lightweight elements". Instead: "a slight change in the lattice parameter from 3.406 Å to 3.408 Å indicates lattice expansion due to doping of oxygen", and "the amount of oxygen is checked according to the Ti concentration in the system, which is introduced into the system with a certain pure Ti / TiO2 ratio."
  • CALPHAD was run "only for the base alloy since oxygen is not included in the HEA database."

2.2 Structure as cast (I1)

  • Both alloys single bcc by XRD; for the oxygen-doped alloy, "SAED confirms that the structure is a single BCCBody-centered cubic — Fe/steel common; plasticity more temperature-sensitive. without any additional phases", and no B2 superlattice spots. Dendritic micro-segregation (Nb, Ta in dendrites; Ti, Zr between), "oxygen does not make any morphological and compositional change in the as-cast state."

2.3 Hardness and compression (I1, Table 4.6)

  • Vickers (1 kg, ten places): "321 HV and 440 HV for BA and OA, respectively" (Table 4.6: 321±6 and 440±20).
  • Compression of the oxygen-doped alloy (four samples, 4 mm × 6 mm, 10⁻⁴ s⁻¹): "The yield strength is measured as 1240±50 MPa using the 0.2% offset method"; "the specimens did not fracture until the test was stopped at 35% strain, exceeding 3000 MPa stress."
  • Caveat stated by I1: "Since the samples have small dimensions for any extensometer, the strain values are given for the relative comparison of the stress values."
  • Table 4.6 lists the base alloy's yield strength as "-": no compression yield was measured for the un-doped alloy.
  • Lei et al. as restated by I1 (TiZrHfNb, tension): 2 at.% oxygen raised "yield strength from 750 MPa to 1110 MPa (48%) and elongation from 14.2% to 27.7% (95%)"; the mechanism restated is "ordered complex oxygen clusters instead of interstitial form or simple brittle metallic oxides".

2.4 Heating the 2 at.% O alloy (I1)

  • In-situ XRD/TEM and DSC: single bcc to 600 °C; between 600 and 1000 °C an hcp phase and a second bcc (BCC#1) appear; single bcc again at 1000–1100 °C. Ex-situ: "8-hour treatment at 800 °C induces HCPHexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic. precipitation"; at 1100 °C with furnace cooling, "heavy HCP precipitation". The hcp is "rich in Zr and Hf"; BCC#1 "rich in Ti, Nb and Ta".
  • I1 concludes: "oxygen-doped RHEA does not contain any metallic oxide between 0 °C - 1100 °C."

2.5 The dose ladder in NbTiZr (B1)

  • Alloy and route: "nominally 33.33Nb-33.33Ti-33.33Zr (at %)", homogenized at 1250 °C, then "oxidized in atmospheric air at 1050°C" for 10 min, 30 min and 3 hours. Oxygen enters from the surface, giving an oxygen diffusion zone (ODZ) over a still-metallic interior.
  • Regime 1 (simulation, set levels): Monte Carlo on alloys "containing 0 to 20 at % O at 1050°C" predicts "that metal-metal SRO is negligible up to 2 at % O, beyond which it increases rapidly with primarily Zr-Zr and Nb-Nb clustering." (SRO = short-range order.)
  • Regime 2 (measured): atom probe of "the single-phase base metal adjacent to the oxygen diffusion zone" shows "subnanometer oxygen-rich domains" "enriched to an average of 13.9 at % O. The bulk concentration in the region is 6.7 at % O." Diffraction: "a single-phase BCC structure with evident diffuse scattering".
  • Ceiling (simulation + one measured value): paraequilibrium MC finds "the corresponding spinodal upper limits to be 8 to 9 at % O", "which agrees well with the experimentally observed solubility limit at 6.7% O"; elsewhere "the predicted threshold is ~10 at % O". Past it, "the single-phase base metal initially undergoes spinodal decomposition followed by coarsening of the spinodal structure into aligned lamellae" (Nb-rich bcc and a (Zr,O)-rich phase), then a third phase, suboxides and monoxides.
  • Why oxygen opens the gap (authors): the cations "have positive binary mixing enthalpies and varied oxygen affinities"; "interstitial oxygen alters thermodynamics to produce a high-temperature miscibility gap"; oxygen "clusters into nanoscale complexes with Zr".
  • Hardness by regime (nanoindentation): base metal with interstitial complexes "between 10.1 ± 0.1 GPa 70 μm away from the spinodal interface and 12.1 ± 0.2 GPa at the interface, with 6.7 at % O per APT", "a 3.7× increase in hardness compared to that of the interstitial-free NbTiZr"; spinodal region "18.6 ± 0.6 GPa"; oxides beneath the surface "22.6 ± 0.4 GPa"; after 3 hours "The hardness decreased after 3 hours to 7.6 to 12.4 GPa due to the coarsening of the spinodal structure into lamellae."
  • Toughness, as stated: "no evidence of cracking (fig. S3) in any of the indented layers, which indicates moderate toughness", with shear banding beside the base-metal indents.
  • Nitrogen too: "The bulk average nitrogen concentration was 0.1 at %", with nitrogen domains at 4.6 at.%; the authors suggest "a synergistic effect from the simultaneous presence of oxygen and nitrogen".
  • Second alloy: "a comparable hardness increase in equimolar HfNbTiZr through a similar hierarchical phase separation that proceeded by nucleation and growth" (maximum 21.4 GPa in the figure caption).

3. Grades and analysis

Claim Grade Basis
2 at.% O (nominal) Ti25Zr35Nb20Hf5Ta15 is single disordered bcc as cast STRONG as observed (XRD, SAED, BF-TEM) I1
The oxygen-doped alloy actually holds 2 at.% O WEAK — set by the TiO₂/Ti batch ratio; no gas-fusion or atom-probe oxygen number; the 0.002 Å lattice shift is between rule-of-mixtures values (§3) I1
Hardness 321 → 440 HV with oxygen (≈37%) STRONG as measured (one pair of castings, ten indents each) I1
1240 ± 50 MPa compressive yield, no fracture to 35% strain STRONG as measured; strain values relative only I1
Oxygen raises compressive yield in this alloy NONE in I1 (base-alloy yield not measured); the size of the effect rests on Lei et al. as restated, a different alloy I1
2 at.% O alloy forms hcp (Zr, Hf-rich) and a second bcc between 600 and 1000 °C STRONG as observed; that oxygen causes it NONE — CALPHAD for the oxygen-free base alloy predicts both I1
Below ~2 at.% O, NbTiZr shows negligible metal–metal ordering; above, clustering rises fast STRONG as computed (cluster-expansion MC); experiment matches only at 6.7 at.% B1
NbTiZr base metal at 6.7 at.% O is still bcc, with O–Zr-rich nanodomains (13.9 at.% O) and 10.1–12.1 GPa (3.7× O-free) STRONG as measured (APT, diffraction, nanoindentation; one alloy, one temperature) B1
Single-phase ceiling ~8–10 at.% O (spinodal) at 1050 °C STRONG as computed; 6.7 at.% as the measured solubility limit WEAK (an atom-probe bulk value at the interface, set by diffusion, not by an equilibrium dose series) B1
The O-induced hierarchy keeps NbTiZr tough WEAK — no cracks at indents; nanoindentation is not a ductility test B1
Oxygen alone drives the phase separations; nitrogen's part WEAK (authors: oxygen "provides the necessary driving force alone"; but they also invoke O+N synergy for hardness) B1
A ductility ceiling: an oxygen level past which a refractory HEA turns brittle NONE in any opened source —
Position of the window in TiZrHfNbTa above 2 at.% NONE —

Where the thesis and the paper differ (analysis). I2's abstract gives "a novel low-density (7.98 g/cm3) ductile RHEA", while I1's design value for the base alloy is 8.28 g/cm³; and I2 says "the material is a single-phase BCC with some oxides at room temperature", while I1 concludes that the oxygen-doped alloy "does not contain any metallic oxide between 0 °C - 1100 °C". Either the published composition or processing changed, or the paper's closer look found oxides the thesis missed. Until the paper body is read, the thesis numbers above should be cited as thesis numbers, not as the published result.

Two small inconsistencies in I1 (analysis). (a) Its discussion says "the hardness value of base alloy increased from 312 HV to 440 HV with ~40% hardening", while its results and Table 4.6 give 321 HV; the ratio is ≈37% from 321, ≈41% from 312. I use 321. (b) The 3.406 → 3.408 Å shift that I1 cites as a sign of oxygen uptake is, in its results section, a pair of rule-of-mixtures values: "The theoretical lattice parameters are calculated by the rule of mixture as 3.406 Å for BA and 3.408 Å for OA, similar to the results calculated from XRD peaks". Yet I1 also says the rule-of-mixtures method "is not applicable for oxygen-doped alloy as the theoretical calculations do not consider the effect of doping". The fitted XRD values themselves are not given in the prose I read (figures not inspected). So the lattice shift is not independent evidence of the dose; the dose stays WEAK.

Answer to OQ1 (analysis). Half answered. Oxygen is varied on purpose in a TiZrHfNbTa-type alloy (I1), but only at two levels, 0 and a nominal 2 at.%, so it shows that 2 at.% sits inside the window (one phase, harder, still able to take 35% compressive strain), not where the window ends. The ending is located in a neighbouring alloy (B1): in NbTiZr at 1050 °C, oxygen first stays as a near-random interstitial solution (to ~2 at.%), then gathers into O–Zr nanodomains while the crystal stays bcc (measured at 6.7 at.%, much harder), then splits the alloy into two phases near 8–10 at.% (computed), then forms oxides. That is a staged dose window with a computed single-phase ceiling. It is not a ductility ceiling: nobody in the opened sources pulls or compresses a series of oxygen levels to find where ductility goes.

Design-relevant reading (analysis). (1) From I1 + L1 together: an oxygen addition that helps at room temperature can sit beside hcp formation in the 600–1000 °C range (I1, cause not shown) and, in TiVNbTa, oxygen drains into α-Ti at 700 °C (L1). A design using 2 at.% O for strength should be tested after ageing in its service range, not only as cast ( HYPOTHESIS, mine). (2) From B1: Zr is where oxygen gathers in Nb-Ti-Zr; the authors themselves point to cation choice (positive Nb–Zr mixing enthalpy, different oxygen affinities) as the knob that sets where the miscibility gap opens. Whether Hf and Ta move the ceiling up or down in TiZrHfNbTa is not measured ( NONE).

Contrast with last night (analysis). L1's trace O (≈0.1 at.% bulk) left the solution on ageing; here 2 at.% (I1) and even 6.7 at.% (B1) stay in a bcc solution, at least as cast or at 1050 °C. These are not in conflict: different alloys, temperatures and times. Together they say the window has a temperature edge as well as a dose edge.

Counting rule. Only contradicting data count. I2 contradicts I1 on oxides at room temperature; flagged, not resolved.


SPECULATIVE Cross-domain section. Open after the materials.

4. Bridge A — SPECULATIVE (after the materials)

Bridge A (locked): doping concentration windows and over-doping ↔ valencyArity: how many actants a predicate takes; formal vs semantic valency can diverge., argument saturation and over-arity. Shapes only:

  • A staged window, not a single edge. B1's ladder is: dissolved and near-random → clustered but same crystal → split into two phases → oxides. Shape: a hostMajority element/phase whose lattice dominates the material. "takes" a dilute addition in more than one way before it stops being itself; the first change past ~2 at.% is local grouping, not a new phase. If one wanted a Bridge A shape, it is "saturation shows first as local grouping, only later as a new structure". Shape only.
  • The ceiling is set by the host mix. The authors tie the gap to which cations dislike each other (Nb–Zr) and which bind oxygen (Zr). Shape: the edge of the window belongs to the host-plus-addition pair, not to the addition alone. That repeats the earlier host-relative results in this corpus (Misfit volume: does the element carry its size?).
  • Still continuous. 2, 6.7, 8–10 at.% are positions on a continuous scale, partly in a diffusion gradient. The lock "continuous wt% ≠ discrete arity" holds; nothing here counts slots.

Bridge A pressure: none that forces revision. Bridge A unrevised. No chemical stand-in for a theta role, slot or feature bundle; not a correlate; not a joint field. Merge/Agree not involved. No Navajo remark tonight.


5. Open questions

  1. The paper itself. Open Iroc et al. 2022 (Mater. Des. 223: 111239) in a real browser; check the published composition (density 7.98 vs 8.28 g/cm³), the room-temperature oxides, the measured oxygen content, and whether the base alloy's compression yield is reported.
  2. A ductility ceiling. An opened source that compresses or pulls a refractory HEA at three or more oxygen levels (e.g. 0, 1, 2, 3+ at.%) and finds where ductility is lost. → Answered for Ti–Zr–Nb (not TiZrHfNbTa) in Where added oxygen stops helping ductility: a tensile ladder in Ti–Zr–Nb (2026-10-28): Jiao et al. 2023 tensile ladder, cast Ti–30Zr–14Nb gains ductility to 3 at.% O and loses it past 3.5 at.% (STRONG), with grain-boundary O and no oxide; ceiling host-relative; TiZrHfNbTa ceiling still NONE.
  3. Does Hf/Ta move the ceiling? A dose ladder like B1's in HfNbTaTiZr or TiZrHfNbTa.
  4. Ageing of the 2 at.% alloy. Hardness after holds at 600–900 °C, with oxygen tracked (tie to L1's drain).
  5. Carried: OQ2 and OQ3 of Trace oxygen and nitrogen leave the solution: age softening in TiVNbTa (HfNbTaTiZr ageing series; Borges et al. 2026 on interstitials at screw cores).

6. Separation

SOURCED (inside metallurgy)

I1: design route; Ti25Zr35Nb20Hf5Ta15 and (…)98O2; TiO₂ route; oxygen not measured; lattice 3.406 → 3.408 Å (rule-of-mixtures values); single bcc as cast; 321 → 440 HV; 1240 ± 50 MPa yield, no fracture to 35% (relative strain); base yield not measured; hcp + BCC#1 at 600–1000 °C; no metallic oxide to 1100 °C (thesis claim). I2 (abstract): 7.98 g/cm³; "some oxides at room temperature"; "secondary BCC and HCP nano-lamellar structures start to form above 600 °C". B1: SRO negligible to 2 at.% O (MC); base metal 6.7 at.% O with 13.9 at.% O domains, single bcc; spinodal limits 8–9 / ~10 at.% O; 10.1–12.1, 18.6, 22.6 GPa; 7.6–12.4 GPa after 3 h; no indent cracking; N 0.1 at.% bulk; HfNbTiZr comparable. Lei et al. only as restated by I1.

ANALYSIS (mine, beside the source)

The grades; the thesis-vs-paper conflict; the two I1 inconsistencies; the half-answer to OQ1; the design readings; the contrast with L1.

SPECULATIVE

§4 (Bridge A shapes).

Not claimed

No chemical correlate. No chemical stand-in for a theta role, a feature bundle or a slot. Not a joint field. Bridge A unrevised. Nothing from the unopened paper body (Iroc et al. 2022), Lei et al. 2018/2020 beyond I1's restatement, or Borges et al. 2026. No ductility ceiling claimed. No claim that B1's NbTiZr numbers carry over to TiZrHfNbTa.


7. Verdict

Does an opened source vary oxygen on purpose in TiZrHfNbTa, and find a ceiling? Varies it: yes, at two levels (the thesis behind Iroc et al. 2022): 2 at.% nominal O keeps the cast alloy single bcc ( STRONG) and raises hardness ≈37% ( STRONG); the yield gain is not measured ( NONE) and the dose itself is WEAK. A ceiling: located in a neighbour (NbTiZr, Beaudry et al. 2024): a staged window — near-random solution to ~2 at.% ( STRONG as computed), O–Zr nanodomains in a still-bcc, much harder metal at 6.7 at.% ( STRONG as measured), two-phase split near 8–10 at.% ( STRONG as computed; 6.7 at.% as measured limit WEAK). A ductility ceiling: NONE. Bridge A unrevised.


v0 — 2026-10-27 PT, evening. Pointers added: corpus-reading-order row; CONCLUSIONS-v1-addendum paragraph; site-content-map (inventory, slug, near-ready, Path E page row); back-pointer at tivnbta-interstitial-age-softening §5 OQ1. Speculation flagged. Bridge A lock unrevised. No joint field.

Corpus note: refractory-hea-oxygen-dose-window-v0.md. The metallurgy is same-domain description from the sources the note lists as opened: the M.S. thesis by L. K. İroç (Middle East Technical University, 2022, open repository PDF), which is the precursor of Iroc et al. 2022 (Materials & Design 223: 111239) and is cited as a thesis, not as the published paper; the paper's abstract only (OpenAlex record), which differs from the thesis on density and on room-temperature oxides; and Beaudry et al. 2024 (Science Advances 10: eado9697, CC BY-NC 4.0, the Europe PMC full-text XML read as text; figures and the supplement were not seen), quoted verbatim and machine-checked. The body of Iroc et al. 2022 could not be opened (bot check, HTTP 403) and is not used; Lei et al. 2018 enters only as the thesis restates it. NbTiZr numbers are not claimed for TiZrHfNbTa. Simulations are reported as calculations. The grades (STRONG / WEAK / NONE) and the comparisons between sources are analysis, not a declared correlate. The Bridge A section comes after the materials and is speculative. No chemical stand-in for a theta role or a slot. Bridge A unrevised. Not a joint field.