No joint field · Bridge A = SPECULATIVE pedagogy

Labels: SOURCED HYPOTHESIS SPECULATIVE OPEN NONE (REAL = same-domain materials or linguistics, shown like SOURCED)

Path E · Materials scout (Ti–Zr–Hf–Nb–Ta: the Fe-free base composition, printed in a BIT electron-beam melting paper)

Ti-Zr-Hf-Nb-Ta Fe-free base, printed (Yang et al. 2025, BIT, electron-beam melting): nominal Ti15Zr10Hf40Nb10Ta25 at.% with measured O/C before and after EBM — the x = 0 end of Li's Ti15Zr10Hf40−xNb10Ta25Fex, not printed as Liu's "Base" — materials scout,

What’s claimed and how well supported

Labels on this page
STRONG ×14 HYPOTHESIS ×6 WEAK ×3 SPECULATIVE ×6 OPEN ×5 NONE ×10
Strongest label used
STRONG
Main caveat (quoted)
The Bridge A section comes after the materials and is ◆ SPECULATIVE.

Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.

Terms on this page (5), plain-language definitions
Host (matrix)
Majority element/phase whose lattice dominates the material.
Dopant
Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
BCC
Body-centered cubic — Fe/steel common; plasticity more temperature-sensitive.
Valency (ling.)
Arity: how many actants a predicate takes; formal vs semantic valency can diverge.
Precipitate
Second-phase particle that forms (often on aging) and blocks dislocations.

Definitions quoted from the Chem for linguists primer glossary.

Date: 2026-11-09 PT (weekday research push, evening)
Status: Materials scout. The metallurgy is same-domain description from the source opened below (REAL inside physical metallurgy). Grades, arithmetic and cross-source comparisons are my analysis. The Bridge A section comes after the materials and is SPECULATIVE. Not a correlate. Not a joint field.
Audience: Grant (syntax/semantics; less chemistry). End goal: designing new metal alloys. Takes up open question OQ1 ("Printed composition of Base / F2.5") of Ti–Zr–Hf–Nb–Ta–Fe baseline (Liu 2022): F2.5-ST ~971 MPa / ~17.5% and aged continuous GB Hf₂Fe §5, with side-light on OQ5 (oxygen in the Fe-micro-alloyed hostMajority element/phase whose lattice dominates the material.).
Sources, stated plainly: Yang, Wang, Guo, Cao, Zhang & Xue, "Volatile behaviour of alloying elements during electron beam smelting of refractory TiZrHfNbTa high-entropy alloys", J. Phys.: Conf. Ser. 3080 (2025) 012022, doi:10.1088/1742-6596/3080/1/012022 (CC BY 4.0; OpenAlex diamond OA). Opened as the IOP PDF (HTTP 200, 9 pp.) → text layer. Same Beijing Institute of Technology (BIT) group as Liu 2022 and Li 2025 (B. Wang corresponding; Y. Xue). The paper has no Fe, no heat treatment, no tension and no microstructure-to-property link; it never uses the labels Base, F2.5, HF1 or HF2.
Vocabulary lock kept: Ti, Zr, Hf, Nb and Ta are principal elements, not dopantsIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.. C and O here are impurities (the paper's word), measured in mass ppm. Fe does not appear in this paper; in the BIT family it is the micro-addition (Li 2025's "Fe micro-alloying"). The host is non-equiatomic; it is not equiatomic HfNbTaTiZr.
Does not: claim that an atom, an impurity, a vapour flux or a phase is an argument, operator, slot, feature bundle or theta role; supply a chemical stand-in for a theta role; invent numbers or quotes; read numbers off figures (Figs. 1–5 not digitized); state that Liu's Base is this alloy; invent a meaning for the code "F2.5"; revise Bridge A.

Why this note. Friday's Liu-baseline note left the composition of Liu's Base and F2.5 as NONE in Liu's prose and HF1≡F2.5 as OPEN (OQ1). Li 2025 prints its family as Ti15Zr10Hf40−xNb10Ta25Fex but never prints an Fe-free member. Tonight's question: does any open BIT paper print the Fe-free Ti-Zr-Hf-Nb-Ta host at.%, and does anyone in the group measure oxygen in it?

The case, in plain words. The BIT group re-melts ~2 kg of its Ti-Zr-Hf-Nb-Ta alloy in an electron-beam furnace (10⁻² Pa) to see which elements boil off. Their Table 4 prints the nominal composition as Ti 15, Zr 10, Hf 40, Nb 10, Ta 25 at.%. That is exactly Li's Ti15Zr10Hf40−xNb10Ta25Fex with x = 0, so the Fe in Li's alloys replaces part of the Hf at fixed Ti/Zr/Nb/Ta. The same paper measures oxygen: 276 ± 12 mass ppm in the "Raw material" and 53–71 mass ppm after EBM. But EBM boils off all the Ti, so the melted product is no longer the host; and the paper does not say what the "Raw material" is (element charge or an alloy ingot).

What is new (one sentence). A same-group BIT paper (Yang et al. 2025, IOP PDF, CC BY 4.0) prints the Fe-free Ti-Zr-Hf-Nb-Ta host as nominal Ti15Zr10Hf40Nb10Ta25 at.% ( STRONG as printed), which is the x = 0 end of Li's Ti15Zr10Hf40−xNb10Ta25Fex ( STRONG as arithmetic), so Liu's Base = Ti15Zr10Hf40Nb10Ta25 with Fe replacing Hf is now a better-grounded HYPOTHESIS (same group, matching family formula; not printed as "Base"; Liu melted by vacuum floating melting, this paper by EBM), while the code "F2.5" fits neither 2.5 at.% nor 2.5 wt% Fe under the HF1 mapping (Fe3.5 ≈ 1.4 wt%; 2.5 wt% would need ≈ 6.0 at.% — arithmetic) so its meaning stays OPEN; oxygen is measured for the first time in this family's papers at 276 ± 12 mass ppm "Raw material" (≈ 0.25 at.% by my conversion) and 53 ± 9 / 71 ± 10 after EBM ( STRONG as tabulated), but what the raw material is stays NONE and the EBM product has lost its Ti, so oxygen in the Fe-micro-alloyed host stays NONE; OQ1 narrowed (not closed), OQ5 unchanged.


1. Sources

1.1 Opened this run

Key Source How read Used for
Y5 Yang, Wang, Guo, Cao, Zhang & Xue, "Volatile behaviour of alloying elements during electron beam smelting of refractory TiZrHfNbTa high-entropy alloys", J. Phys.: Conf. Ser. 3080 (2025) 012022, doi:10.1088/1742-6596/3080/1/012022 (CC BY 4.0) IOP PDF HTTP 200 (2.67 MB, 9 pp.) → lit/_pdfs/hea-ebsmelt-2025/eb2025.pdf + .txt (pdftotext -layout) + .raw.txt; OpenAlex JSON (openalex.json; diamond OA, all six authors BIT) Nominal at.% (Table 4); EBM route (Table 1); C/O before/after (Table 2); mass loss (Table 3); post-EBM EDS at.% (Table 4); volatilisation prose and conclusions
(meta) OpenAlex author lists for B. Wang (A5008126175) and Y. Xue (A5001208086) API, filtered by title keywords Finding Y5; checking for other open BIT Ti-Zr-Hf-Nb-Ta papers
(cross) Li et al. 2025 (L5) and Liu et al. 2022 (L4) — already opened 2026-11-05 / 11-06 Prior captures lit/_pdfs/hea-fe-li2025/, lit/_pdfs/hea-fe-liu2022/ (not re-fetched) Li's family formula and HF1/HF2 at.%; Liu's labels and route
(calc) My arithmetic, standard atomic masses lit/_pdfs/hea-ebsmelt-2025/arithmetic_ebm.py → arithmetic_ebm.out wt% ↔ at.% conversions; table sums; mass-loss ratios

Weakness of the copy, stated plainly. Clean text layer; Tables 1–6 extract as text. Figures 1–5 (process diagram, plate photo, EDS bar charts, vapour-pressure curves, rate comparison) are not digitized and nothing is read off them. The paper is a short conference paper with some English slips ("Materail and method"); quotes keep them as printed. The download banner date on page 1 is the publisher's stamp, not a fact about the alloy.

What the source does not report, stated plainly. No Fe; no label Base / F2.5 / HF1 / HF2; no statement that this alloy is the Liu or Li host; no description of how the "Raw material" was made (element charge, induction-melted ingot or recycled scrap); no nitrogen or hydrogen numbers (an ONH tester is named, only O and C are tabulated); no phase, grain or tensile data; no measured composition of the starting charge (only nominal).

Independence, stated plainly. Y5 is the same BIT group as L4 and L5 (Wang, Xue). A matching formula across the group's papers is continuity, not independent confirmation.

1.2 Not opened / searched without a hit (do not treat as read)

  • OpenAlex search for an open BIT paper printing "Base" / "F2.5" at.%: none found. The group's other Ti-Zr-Hf-Nb-Ta(-Ta) papers listed by OpenAlex are closed (MSEA 2025 148983, Ti-Zr-Hf-Nb-Ta energetic-alloy fragmentation; J. Alloys Compd. 2024 175137 Ti-Zr-Hf-Ta; Springer 2025, doi:10.1007/s42864-025-00320-5, Ti-V-Zr-Nb-Hf-Ta annealing; Nat. Mater. 2023 planar-slip paper). Titles only; not read; nothing taken from them.
  • Yasuda 2021 body, Zhao 2025 body: not retried. Not routed around.
  • Equiatomic HfNbTaTiZr with Fe (OQ4): OpenAlex is_oa searches returned only Liu 2022 and Li 2025 for Ti-Zr-Hf-Nb-Ta-Fe; no equiatomic Fe ladder found.

2. Sourced materials (Y5)

2.1 Host and route

  • Host named as "Ti-Zr-Hf-Nb-Ta refractory high-entropy alloy (HEA)"; the authors say Ti-Zr-Hf-Nb-Ta refractory HEAs have a "body-centred cubic (BCCBody-centered cubic — Fe/steel common; plasticity more temperature-sensitive.) structure" (restated from refs. [5, 6], not shown here).
  • Nominal composition, Table 4 row "Nominal composition": Ti 15, Zr 10, Hf 40, Nb 10, Ta 25 (at%).
  • Usual route named by the authors: "high-vacuum induction melting method [7]", with "large shrinkage holes" in the ingot; EBM is proposed for "the recycling of alloys".
  • EBM: "melting point of 2400 K"; water-cooled copper crucible "90 mm×155 mm"; "The vacuum of the EBM process was kept at 10-2 Pa"; three steps, "uniform preheating, small-area smelting, and overall smelting"; "flip remelting was required twice". Table 1: preheat 15 kW + 5 min, small-area 51 kW + 10 min, overall 81 kW + 15 min (Group 1) or 75 kW + 15 min (Group 2).
  • Analysis tools: EDS on SEM for composition; C by a carbon/sulphur tester; "the O content of the alloy was tested using a US-Like-ONH836 inorganic oxygen, nitrogen, and hydrogen tester".

2.2 Impurities (Table 2; footnote "One-millionth of the mass")

Raw material Group 1 Group 2
C (mass ppm) 98 ± 8 73 ± 5 77 ± 6
O (mass ppm) 276 ± 12 53 ± 9 71 ± 10
  • "Each sample was repeated three times, and the average value was taken."
  • Conclusion (1): "After EBM, C, O, and other impurities in the alloy were effectively removed, all below 100 ppm."

2.3 Volatilisation and composition after EBM

  • Abstract: "Ti elements are completely volatilised, Hf and Zr elements are volatilised by about 1% to 2%, and Nb and Ta elements are not volatilised."
  • Results: "the Hf element is volatilised by about 2%, the Zr element is volatilised by no more than 1%".
  • Table 4, after EBM (at%): Group 1 Ti printed as a slash, Zr 9.34 ± 0.29, Hf 37.14 ± 0.73, Nb 9.93 ± 0.06, Ta 24.70 ± 0.95; Group 2 Ti printed as a slash, Zr 9.58 ± 0.25, Hf 38.48 ± 0.91, Nb 9.96 ± 0.16, Ta 24.85 ± 0.87.
  • Table 3: raw 2000.5 g → 1815.05 g (loss 185.46 g, printed ratio 9.07%) for Group 1; 1998.0 g → 1831.47 g (loss 166.53 g, printed ratio 7.24%) for Group 2; "The mass loss of alloys increased with the increase in melting power."
  • Model: Miedema activities of Ti-Hf-Ta, Ti-Zr-Nb and Zr-Hf-Nb averaged for the quinary, Langmuir rates; measured vs model rates for Hf and Zr differ by "less than 1×10-3 kg·m-2·s-1" (Table 6 rates: Hf 3.43×10⁻³ / 1.82×10⁻³, Zr 4.01×10⁻⁴ / 2.58×10⁻⁴ kg m⁻² s⁻¹ at 3050 K / 2980 K).

2.4 Cross-check against the Fe papers (L4, L5; prior captures)

  • L5 (Li 2025): "Ti15Zr10Hf40−xNb10Ta25Fex (x = 3.35, 3.5)"; HF1 = "Ti15Zr10Hf36.5Nb10Ta25Fe3.5"; HF2 = "Ti15Zr10Hf36.65Nb10Ta25Fe3.35"; "arc melting" under argon, "repeatedly melted five times".
  • L4 (Liu 2022): "Ti-Zr-Hf-Nb-Ta and Ti-Zr-Hf-Nb-Ta-Fe (named as Base and F2.5, respectively)"; "vacuum floating melting"; no at.% printed.

3. Grades and analysis

Claim Grade Basis
BIT Ti-Zr-Hf-Nb-Ta nominal = Ti15Zr10Hf40Nb10Ta25 at.% STRONG as printed (nominal, not measured before melting) Y5 Table 4
That composition = x = 0 end of Li's Ti15Zr10Hf40−xNb10Ta25Fex STRONG as arithmetic (Ti, Zr, Nb, Ta identical; Hf 40 − 0) Y5, L5
Fe in the BIT family replaces Hf at fixed Ti/Zr/Nb/Ta STRONG as read from Li's formula (Li's own design); now with a printed Fe-free endpoint L5, Y5
Liu's "Base" = Ti15Zr10Hf40Nb10Ta25 HYPOTHESIS (same group, same family formula, same years; Y5 never says "Base"; different melting routes) Y5, L4, L5
Liu's F2.5 = Li's HF1 (Fe3.5) OPEN (unchanged; Y5 has no Fe) —
"F2.5" = 2.5 at.% Fe or 2.5 wt% Fe OPEN; arithmetic shows HF1 Fe3.5 ≈ 1.42 wt% and HF2 Fe3.35 ≈ 1.35 wt%, while 2.5 wt% Fe (for Hf) would be ≈ 6.0 at.%, so under the HF1 mapping the code is neither (code meaning NONE in any source) arithmetic_ebm.out
Raw-material O 276 ± 12 mass ppm, C 98 ± 8; after EBM O 53 ± 9 / 71 ± 10, C 73 ± 5 / 77 ± 6 STRONG as tabulated (three repeats averaged) Y5 Table 2
276 mass ppm ≈ 0.245 at.% O (53 → ≈ 0.047, 71 → ≈ 0.063) WEAK (my conversion with the nominal mean atomic mass 142.2 g/mol; valid only if the raw material has the nominal composition) arithmetic_ebm.out
What the "Raw material" is (charge, ingot, scrap) NONE Y5
Oxygen in Liu's Base/F2.5 or Li's HF1/HF2 NONE (unchanged; Y5 is not those specimens and none of the three papers measures O in them) —
EBM removes all Ti; Hf ~2%, Zr ≤ 1%; Nb, Ta not STRONG as stated (EDS) Y5
Table 4 post-EBM rows are a normalized Ti-free composition NONE — the four printed values sum to 81.11 (G1) and 82.87 (G2), not 100; read as at.% points relative to the nominal, Hf drops 2.86 / 1.52 and Zr 0.66 / 0.42 (arithmetic) Y5, arithmetic_ebm.out
Table 3 printed loss ratios 9.07% / 7.24% STRONG as an internal inconsistency: the printed masses give 185.46/2000.5 = 9.27% and 166.53/1998.0 = 8.33% (arithmetic); keep both, do not correct the source Y5, arithmetic_ebm.out
Ti's mass share of the nominal alloy is ≈ 5.05 wt% arithmetic; with either loss ratio the mass lost exceeds Ti alone, consistent with the stated Hf/Zr loss (cause of the remainder NONE) arithmetic_ebm.out
Miedema/Langmuir model fits Hf, Zr within 1×10⁻³ kg m⁻² s⁻¹ WEAK (two melts, model without the Q term, authors' own judgement) Y5
Any mechanical or phase consequence NONE —

Answer to OQ1 of the Liu-baseline note (analysis). OQ1 asked whether any table, supplement or later BIT paper gives the at.% Liu used. Narrowed, not closed. A later BIT paper prints the group's Fe-free Ti-Zr-Hf-Nb-Ta as Ti15Zr10Hf40Nb10Ta25, and that is exactly the x = 0 end of the Li family. So the simplest reading — Liu's Base is Ti15Zr10Hf40Nb10Ta25, and Fe goes in for Hf — gains a printed anchor, but stays a HYPOTHESIS because no paper prints Base = (formula) in words. The second half of OQ1 (what "F2.5" means) gets one honest result: under the HF1 mapping the code is not a plain at.% or wt% value. That points to "F2.5" being a lab code, or to F2.5 not being HF1; neither is sourced.

Side-light on OQ5 (analysis). This is the first oxygen number in any BIT Ti-Zr-Hf-Nb-Ta paper the corpus has opened. It does not answer OQ5: the starting "Raw material" is undescribed, and the EBM product is a different (Ti-free) alloy. If the raw material were the group's induction-melted host, ~0.25 at.% O would sit close to Poulain et al. 2024's low-oxygen equiatomic level (0.27 at.%; Oxygen in HfNbTaTiZr: measured 0.27 vs 3.24 at.%, stability on ageing) — a different alloy and lab; comparison HYPOTHESIS, not counted.

Design-relevant reading (analysis). (1) In this family, Fe trades against Hf one-for-one in Li's design; Hf is also the element that leaves the solution with Fe as Hf₂Fe (L4, L5), so the Fe dose and the Hf left in the matrix move together ( HYPOTHESIS for design). (2) EBM cleans O and C below 100 mass ppm but removes all Ti and some Hf, so it is a refining step that changes the host formula, not a neutral remelt ( STRONG as stated for these two melts). (3) Any future Fe window in this host needs a printed starting composition and a measured oxygen on the tensile specimens; neither exists yet in the opened sources.

Counting rule. Only contradicting data count. Y5, L4 and L5 are one group: the matching formula is continuity, not confirmation. The Table 3 ratio mismatch and the Table 4 sums are internal to Y5 and are recorded, not used to correct it. No figure digitization. No source counted twice.


SPECULATIVE Cross-domain section. Open after the materials.

4. Bridge A — SPECULATIVE (after the materials)

Bridge A (locked): doping concentration windows and over-doping ↔ valencyArity: how many actants a predicate takes; formal vs semantic valency can diverge., argument saturation and over-arity. Shapes only:

  • A substitution with a fixed frame. In Li's design the Fe goes in where Hf comes out; the other four amounts stay put. Shape: a window can be built by trading one filler against another inside a fixed frame rather than by adding on top. Shape only; no element is a role.
  • An endpoint that has to be printed. The window's x = 0 end was missing until a different paper printed it. Shape: an edge of a range is not known just because the formula implies it; it has to be shown. Shape only.
  • Cleaning that changes the host. Removing impurities by EBM also removed a principal element. Shape: a step meant to remove the extra can delete part of the frame. Shape only.
  • Still continuous. at.%, mass ppm and kg m⁻² s⁻¹ are continuous amounts; the lock "continuous wt% ≠ discrete arity" holds; nothing here counts slots.

Bridge A pressure: none that forces revision. Bridge A unrevised. No chemical stand-in for a theta role, slot or feature bundle; not a correlate; not a joint field. Merge/Agree not involved. No Navajo remark tonight. (Grant's dropped 2026-11-02 "roles not words" theory is not reported as open.)


5. Open questions

  1. "Base" printed. Does any BIT paper or thesis say in words that Liu's Base is Ti15Zr10Hf40Nb10Ta25? (Closed BIT papers listed in §1.2 might; not opened.)
  2. The code "F2.5". If it is neither 2.5 at.% nor 2.5 wt% Fe under the HF1 mapping, is it a lab code, or is F2.5 a different Fe level from HF1 (carried from the Liu note OQ1)?
  3. What the EBM "Raw material" was. Elemental charge, an induction-melted ingot, or recycled scrap with shrinkage holes? Only the last two would make 276 mass ppm an oxygen level of the host.
  4. Oxygen on tensile specimens. Still open (Liu-note OQ5, Fe-note OQ3): no measured O on any Base/F2.5/HF1/HF2 specimen. Bounded (not measured) by Oxygen in a Hf-bearing refractory host: ~0.3 at.% as melted, HfO₂ above ~0.5 at.% (Nb45Ta25Ti15Hf15) (2026-11-10 evening): as-melted ~0.3 at.% O in an arc-melted Hf-bearing host from ≥ 99.95% charge; HfO₂ above ~0.5 at.% there.
  5. Y5 Table 3 and Table 4. Why the printed loss ratios (9.07%, 7.24%) differ from the printed masses (9.27%, 8.33%), and what the post-EBM at% (sums ~81–83) are normalized to.
  6. Carried: Liu-note OQ2 (aged elongation %), OQ3 (precipitateSecond-phase particle that forms (often on aging) and blocks dislocations. morphology conflict), OQ4 (equiatomic transfer; no open equiatomic Fe ladder found tonight); Fe-note OQ2, OQ5; OQ1–OQ4, OQ6 of HfNbTaTiZr between 550 and 1000 °C: where the unstable band ends (two edges, not one); prior carried stack listed there.

6. Separation

SOURCED (inside metallurgy)

Y5: BIT Ti-Zr-Hf-Nb-Ta, nominal Ti15Zr10Hf40Nb10Ta25 at.%; EBM at 10⁻² Pa in a 90 × 155 mm water-cooled Cu crucible, two power settings (81 / 75 kW overall), two flip remelts; C/O raw 98 ± 8 / 276 ± 12 mass ppm, after EBM 73–77 / 53–71 mass ppm; all Ti volatilised, Hf ~2%, Zr ≤ 1%, Nb and Ta not; post-EBM EDS at% as Table 4; printed mass losses and ratios as Table 3; Miedema/Langmuir model within 1×10⁻³ kg m⁻² s⁻¹ for Hf, Zr. L5: family Ti15Zr10Hf40−xNb10Ta25Fex, HF1/HF2 at.%. L4: labels Base/F2.5, route.

ANALYSIS (mine, beside the sources)

The grades; x = 0 identity; Base = Ti15Zr10Hf40Nb10Ta25 as HYPOTHESIS; F2.5 code arithmetic; mass ppm → at.% conversion; Table 3/Table 4 arithmetic; OQ1 narrowed; OQ5 side-light; design readings; counting (one group).

SPECULATIVE

§4 (Bridge A shapes).

Not claimed

No chemical correlate. No chemical stand-in for a theta role, a feature bundle or a slot. Not a joint field. Bridge A unrevised. No number read off a figure. No invented Fe at.%. No statement that Liu's Base is printed anywhere. No oxygen value for the Fe-micro-alloyed host. Nothing from the closed BIT papers (titles only). The dropped roles-not-words theory is not treated as open.


7. Verdict

Does an open BIT paper print the composition Liu used? Not in words, but closer. Yang et al. 2025 prints the group's Fe-free Ti-Zr-Hf-Nb-Ta as nominal Ti15Zr10Hf40Nb10Ta25 at.% ( STRONG), the exact x = 0 end of Li's Ti15Zr10Hf40−xNb10Ta25Fex ( STRONG as arithmetic); Liu's Base being this alloy is a HYPOTHESIS with a printed anchor; "F2.5" is not 2.5 at.% or 2.5 wt% Fe under the HF1 mapping (arithmetic), so its meaning stays OPEN. Oxygen 276 ± 12 mass ppm in an undescribed "Raw material" and 53–71 after EBM ( STRONG as tabulated; ≈ 0.25 at.% WEAK conversion) does not reach the Fe-micro-alloyed host ( NONE). Table 3 ratios disagree with the printed masses ( STRONG internal inconsistency). OQ1 narrowed; OQ5 unchanged. Bridge A unrevised; shapes only, after the materials.


v0 — 2026-11-09 PT, evening. Pointers added: corpus-reading-order row; CONCLUSIONS-v1-addendum paragraph; site-content-map (inventory, slug, near-ready, Path E page row); back-pointer at tizrhfnbta-fe-liu2022-baseline §5 OQ1 (+ footer). Quotes machine-checked against the captured text (lit/_pdfs/hea-ebsmelt-2025/check_quotes_ebm.py); arithmetic in lit/_pdfs/hea-ebsmelt-2025/arithmetic_ebm.py. Speculation flagged. Bridge A lock unrevised. No joint field. Back-pointer 2026-11-10: §5 OQ4 bounded by Oxygen in a Hf-bearing refractory host: ~0.3 at.% as melted, HfO₂ above ~0.5 at.% (Nb45Ta25Ti15Hf15).

Corpus note: tizrhfnbta-base-composition-ebm-v0.md. The metallurgy is same-domain description from the source the note lists as opened: Yang, Wang, Guo, Cao, Zhang & Xue 2025 (J. Phys.: Conf. Ser. 3080: 012022, CC BY 4.0), the IOP PDF read through its text layer; figures were not digitized, so no number is read off a figure. Quotes are verbatim and machine-checked; conversions (mass ppm to at.%, at.% to wt%) and table sums are the note's own arithmetic in a script beside the capture. The paper is from the same Beijing Institute of Technology group as Liu 2022 and Li 2025, has no Fe, no heat treatment and no tensile test, and never uses the labels Base, F2.5, HF1 or HF2; that Liu's Base is this alloy is a hypothesis, not a printed fact. Oxygen is measured only in an undescribed raw material and in Ti-free electron-beam-melted plates, so no oxygen level is given for the Fe-micro-alloyed host. The grades (STRONG / WEAK / NONE / OPEN / HYPOTHESIS) and the comparisons between sources are analysis, not a declared correlate. The Bridge A section comes after the materials and is speculative. No chemical stand-in for a theta role or a slot. Bridge A unrevised. Not a joint field.