No joint field · Bridge A = SPECULATIVE pedagogy

Labels: SOURCED HYPOTHESIS SPECULATIVE OPEN NONE (REAL = same-domain materials or linguistics, shown like SOURCED)

Path E · Materials scout (Ti–Zr–Hf–Nb–Ta with Fe micro-alloying: ductility vs Fe dose and ageing)

Ti-Zr-Hf-Nb-Ta with Fe micro-alloying: a ductility window set by nano Hf₂Fe at grain boundaries — Fe dose and ageing clock move elongation from ~19% to ~2.65% at ~955–1081 MPa (non-equiatomic host; oxygen not measured) — materials scout,

What’s claimed and how well supported

Labels on this page
STRONG ×23 HYPOTHESIS ×3 WEAK ×7 SPECULATIVE ×7 OPEN ×1 NONE ×11
Strongest label used
STRONG
Main caveat (quoted)
The Bridge A section comes after the materials and is ◆ SPECULATIVE.

Counted automatically from the labels printed on this page. Counts are a reading aid, not a grade of the page.

Terms on this page (10), plain-language definitions
Dopant
Intentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase.
Host (matrix)
Majority element/phase whose lattice dominates the material.
Solute
Intentional minority species dissolved in the host (alloying addition).
Grain boundary
Interface between crystals in a polycrystal; barriers in Hall–Petch strengthening.
Dislocation
Line defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries.
Precipitate
Second-phase particle that forms (often on aging) and blocks dislocations.
FCC
Face-centered cubic — many slip systems; Al, Cu, Ni typically ductile.
BCC
Body-centered cubic — Fe/steel common; plasticity more temperature-sensitive.
HCP
Hexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic.
Valency (ling.)
Arity: how many actants a predicate takes; formal vs semantic valency can diverge.

Definitions quoted from the Chem for linguists primer glossary.

Date: 2026-11-05 PT (weekday research push, evening)
Status: Materials scout. The metallurgy is same-domain description from the source opened below (REAL inside physical metallurgy). Grades and cross-source comparisons are my analysis. The Bridge A section comes after the materials and is SPECULATIVE. Not a correlate. Not a joint field.
Audience: Grant (syntax/semantics; less chemistry). End goal: designing new metal alloys. Takes up open question OQ5 ("A real dopantIntentional dilute impurity meant to tune electronic/optical/catalytic behavior without replacing the host as majority phase. window in this family") of HfNbTaTiZr between 550 and 1000 °C: where the unstable band ends (two edges, not one) §5: Fe as a true minor addition to a Ti-Zr-Hf-Nb-Ta multi-principal hostMajority element/phase whose lattice dominates the material., with ductility reported against Fe level and ageing.
Sources, stated plainly: Li, Ke, Wang, Wang & Xue, "Ductility Control via Nano-Precipitation at Grain Boundaries in Ti-Zr-Hf-Nb-Ta Multi-Principal Element Alloys", Materials 2025, 18, 1463, doi:10.3390/ma18071463 (CC BY; PMC11989734). Opened as the Europe PMC full-text XML (HTTP 200) plus the PMC HTML page (tables cross-checked). The MDPI PDF returned HTTP 403 to curl; Europe PMC PDF render also 403; not routed around. HF1-ST and HF1-500-30 tensile numbers are restated from Liu et al. 2022 (J. Phys. Conf. Ser. 2383: 012141; same group), which was not opened.
Vocabulary lock kept: Ti, Zr, Hf, Nb and Ta are principal elements, not dopants (Doping vs alloying vocabulary). Fe here is a dopant / minor addition (true micro-alloying at 3.35–3.5 at.%). That is the contrast with the prior oxygen-interstitial notes in this family, where the varied species was an interstitial soluteIntentional minority species dissolved in the host (alloying addition)., not a substitutional micro-addition. The host is not the equiatomic HfNbTaTiZr of those notes: it is Ti₁₅Zr₁₀Hf≈₃₆Nb₁₀Ta₂₅ plus Fe.
Does not: claim that an Fe atom, a precipitateSecond-phase particle that forms (often on aging) and blocks dislocations., a grain boundaryInterface between crystals in a polycrystal; barriers in Hall–Petch strengthening., a temperature or a dislocationLine defect enabling plastic slip at realistic stresses; edge vs screw are the two classic geometries. is an argument, operator, slot, feature bundle or theta role; supply a chemical stand-in for a theta role; invent numbers or quotes; read numbers off figures; claim an oxygen level; treat this non-equiatomic host as the same alloy as equiatomic HfNbTaTiZr; revise Bridge A.

Why this note. Last night's unstable-band note named Li et al. 2025 as the lead for a sourced concentration window (Bridge A's home ground) with Fe as a true minor addition. That paper is open (PMC / Europe PMC). It is the first opened source in this line that deliberately varies a dopant amount in a Ti-Zr-Hf-Nb-Ta multi-principal host and reports tensile ductility against both dose and ageing.

The case, in plain words. Two close compositions — Ti₁₅Zr₁₀Hf₃₆.₅Nb₁₀Ta₂₅Fe₃.₅ (HF1) and Ti₁₅Zr₁₀Hf₃₆.₆₅Nb₁₀Ta₂₅Fe₃.₃₅ (HF2), differing by 0.15 at.% Fe — are solution-treated at 1300 °C and then aged. Ageing puts nano Hf₂Fe on the grain boundaries. With more precipitate (higher Fe, hotter or longer age) the alloy gets stronger at first and then loses elongation hard; with a slightly leaner Fe dose and a short age that leaves precipitates below what SEM/TEM see, the authors get about 1037 MPa with about 14% elongation. Across the set, elongation runs from about 19% down to about 2.65% while strength stays between about 955 and 1081 MPa.

What is new (one sentence). In non-equiatomic (TiZrHfNbTa)₁₀₀₋ₓFeₓ with x ≈ 3.35–3.5 (Li et al. 2025, Europe PMC XML), Fe is a true micro-alloying addition that drives nano Hf₂Fe at grain boundaries ( STRONG as observed for aged HF1 and for HF2-525-60 / HF2-525-24h; HYPOTHESIS that HF2-525-30 has precipitates below the TEM limit); this work's own tensile set gives HF2-ST 955 ± 25 MPa / 19 ± 2%, HF2-525-30 1037 ± 17 MPa / 14 ± 1%, HF2-525-60 960 ± 50 MPa / 2.65 ± 0.15%, and HF1-600-30 271 ± 6 MPa / 0.35 ± 0.15% ( STRONG as measured), while HF1-ST 971 MPa / 17.5% and HF1-500-30 1081 MPa / 7.5% are restated from Liu et al. 2022 ( WEAK here); together the authors' range "elongation varying from 2.65% to 19%" at "alloy strength between 955 and 1081 MPa" is a sourced Fe-dose + ageing ductility window ( STRONG as a measured span in this host; not transferred to equiatomic HfNbTaTiZr), oxygen is NONE, and Bridge A finally has a true minor-addition window in this family ( SPECULATIVE shapes only, after the materials).


1. Sources

1.1 Opened this run

Key Source How read Used for
L5 Li, Ke, Wang, Wang & Xue, "Ductility Control via Nano-Precipitation at Grain Boundaries in Ti-Zr-Hf-Nb-Ta Multi-Principal Element Alloys", Materials 2025, 18, 1463, doi:10.3390/ma18071463 (CC BY; PMC11989734; PMID 40271633) Europe PMC REST full-text XML (HTTP 200, ~105 KB) → lit/_pdfs/hea-fe-li2025/li2025-epmc.xml + .txt (structured) + .raw.txt (XML + PMC HTML text); PMC HTML page saved as pmc-html.html / li2025-pmc-html.txt for table cross-check; OpenAlex JSON Compositions, route, Table 1 heat treatments, Table 2 tensile numbers, precipitate observations (SEM/TEM prose), Hf₂Fe identification, CALPHAD restatement, authors' window claim
(meta) OpenAlex work W4408831588 openalex.json PMC id, OA status, locations

Weakness of the copy, stated plainly. No PDF was obtained (MDPI 403; Europe PMC PDF render 403; PMC OA package endpoint 404). The Europe PMC XML and PMC HTML agree on Tables 1–3 cell text. Table 1 names the alloy HF1-600-30 but lists its aging time as 60 min; the caption's naming rule says the trailing number is aging time in minutes, so the name and the cell disagree. Prose discusses that condition as a change of aging temperature to 600 °C. Mechanical numbers for HF1-600-30 are taken from Table 2; aging time for that one cell is not used as a graded claim. Figures are not read for numbers. Liu et al. 2022 (ref. [4]) was not opened.

What the sources do not report, stated plainly. No oxygen, nitrogen or carbon content; no measured Fe after melting (nominal compositions); no equiatomic HfNbTaTiZr companion; no tension after the intermediate-temperature bcc-split / hcp anneals of the equiatomic notes; no independent re-measure of HF1-ST / HF1-500-30 in this work.

Independence, stated plainly. L5 (Beijing Institute of Technology: Ke, Xue, Wang et al.) shares no author with C2 (Chen/Liaw), Y4/Y21 (Yasuda), P1/Z1 (Poulain/Laplanche), L2/J1 (Lei/Wu) or L3 (Larianovsky). HF1 baselines are from Liu, Wang, Wang & Xue 2022 (same group as L5), so the HF1-ST / HF1-500-30 numbers are not an independent lab.

1.2 Not opened (do not treat as read)

  • Liu et al. 2022 (J. Phys. Conf. Ser. 2383: 012141): opened 2026-11-06 as Ti–Zr–Hf–Nb–Ta–Fe baseline (Liu 2022): F2.5-ST ~971 MPa / ~17.5% and aged continuous GB Hf₂Fe (no longer "not opened"; kept here only as historical pointer from v0 filing night).
  • Stepanov et al. 2018 (Mater. Lett.): the named fallback if Li were blocked; not needed tonight (Li opened).
  • Yasuda et al. 2021 body, Zhao et al. 2025 body: still blocked; not retried. Not routed around.
  • Prior equiatomic captures (C2, Y4, P1, L3, …): re-used only for vocabulary and not-the-same-host contrast; no new claim from them tonight.

2. Sourced materials (L5)

2.1 Host, dopant and route

  • Design labels: HF1 = Ti₁₅Zr₁₀Hf₃₆.₅Nb₁₀Ta₂₅Fe₃.₅; HF2 = Ti₁₅Zr₁₀Hf₃₆.₆₅Nb₁₀Ta₂₅Fe₃.₃₅ ("reducing the Fe content by 0.15 at. % compared to HF1").
  • Vocabulary in the authors' words: "Fe micro-alloying"; formula written "(TiZrHfNbTa)₁₀₀₋ₓFeₓ".
  • Making: "arc melting Ti, Zr, Hf, Nb, Ta, and Fe metals with high purity (>99.9 wt.%) in an argon atmosphere"; "repeatedly melted five times"; "drop-casted into a crucible with a dimension of Φ50 × 60 mm³".
  • Solution treatment: "1300 °C for 2 h and then water quenched"; then aging "at different temperatures and holding times and then water quenched again".
  • Tension: dog-bone 1 × 3 × 10 mm; "1 × 10−3 s−1"; room temperature; "repeated at least three times".

2.2 Heat-treatment matrix (Table 1) and precipitates (prose)

  • HF1-ST / HF2-ST: "single-phase structure without precipitates" / "showed no precipitates".
  • HF1-500-30: "very fine precipitates at the grain boundaries"; TEM "discontinuously distributed, with a thickness of approximately 5 nm".
  • HF1-600-30: "completely continuous distribution at the grain boundaries, with a thickness of about 19 nm" (Table 1 time-cell conflict noted in §1.1; not graded).
  • HF2-525-30: "no grain boundary precipitates were observed by either SEM (Figure 1e) or TEM (Figure 2c)".
  • HF2-525-60: "discontinuous distribution and a thickness of approximately 9 nm".
  • HF2-525-24h (characterization only): continuous GB precipitates; HRTEM/FFT "matrix as BCCBody-centered cubic — Fe/steel common; plasticity more temperature-sensitive.", "precipitates at the grain boundaries were determined to be FCCFace-centered cubic — many slip systems; Al, Cu, Ni typically ductile., exhibiting a significant lattice mismatch with the matrix"; EDS "enriched in Fe and depleted in Ti"; "consistent with Liu’s characterization of the HF1 alloy [4], which identified the precipitates as Hf₂Fe with an FCC structure".

2.3 Tensile numbers (Table 2)

Alloy Yield strength (MPa) Elongation (%) Provenance in L5
HF1-ST 971 17.5 References [4]
HF1-500-30 1081 7.5 References [4]
HF1-600-30 271 ± 6 0.35 ± 0.15 This work
HF2-ST 955 ± 25 19 ± 2 This work
HF2-525-30 1037 ± 17 14 ± 1 This work
HF2-525-60 960 ± 50 2.65 ± 0.15 This work
  • Authors' window claim (abstract / conclusions): "elongation varying from 2.65% to 19% while maintaining alloy strength between 955 and 1081 MPa"; balanced point "strength of 1037 MPa and elongation of 14%" (HF2-525-30).
  • HF1-500-30 vs HF1-ST (restated): yield "increased from 971 MPa to 1081 MPa"; elongation "from 17.5% to 7.5%".
  • HF1-600-30: "A brittle fracture occurred before the yield point, with an average yield strength of about 271 MPa and no observable ductility" (Table 2 still lists 0.35 ± 0.15% elongation).
  • Authors' precipitate-amount order (least → most): "HF2-525-30 < HF1-500-30 < HF2-525-60 < HF1-600-30", said to align with ductility.
  • HF2-525-30 reading in the authors' words: "fine nano-sized precipitates below the observation limit of TEM had formed at this condition" (inference from the strength rise with no visible precipitate).

2.4 CALPHAD (authors' calculation)

  • Unrestricted databases (TCHEA6, TCTI4, TCNI12): "matrix identified as a HCPHexagonal close-packed — fewer primary slip systems; Mg, Ti, Zn often anisotropic. phase, and precipitates as μ phase and BCC phases" — "differ significantly from the experimental results".
  • Restricted to BCC, FCC and NiTi₂: "BCC_B2 phase is identified as the matrix phase, while the NiTi₂ phase is the Hf-Fe precipitate observed by experiments"; "equilibrium volume fraction of the NiTi2 phase calculated by all three databases is less than 0.1".
  • With rising temperature or falling Fe, "the equilibrium volume fraction of the Hf₂Fe phase decreases"; at fixed composition and time, higher aging temperature still gave more/larger precipitates in experiment — authors read kinetics dominating thermodynamics for that comparison.

3. Grades and analysis

Claim Grade Basis
Host is non-equiatomic Ti₁₅Zr₁₀Hf≈₃₆Nb₁₀Ta₂₅; Fe is a 3.35–3.5 at.% micro-addition STRONG as stated (nominal) L5
Solution-treated HF1/HF2: no GB precipitates STRONG as observed (SEM/TEM) L5
Aged HF1-500-30: discontinuous ~5 nm GB precipitates; HF1-600-30: continuous ~19 nm network; HF2-525-60: discontinuous ~9 nm STRONG as stated (TEM thicknesses) L5
GB precipitates are FCC Hf₂Fe WEAK→STRONG: Fe-rich / Ti-poor and FCC in L5 ( STRONG locally); the Hf₂Fe name rests on Liu et al. 2022 ( WEAK here, [4] unopened) L5, [4]
HF2-525-30 has precipitates below the TEM limit HYPOTHESIS (authors' inference from strength rise; SEM/TEM show none) L5
This-work tensile set (HF2-ST, HF2-525-30, HF2-525-60, HF1-600-30) STRONG as measured (means ± stated; ≥3 repeats) L5 Table 2
HF1-ST / HF1-500-30 tensile numbers WEAK here (restated from Liu et al. 2022; same group) L5 Table 2 → [4]
Ductility span ~2.65–19% at strength ~955–1081 MPa by Fe + ageing STRONG as a measured span in this host (mix of this-work and restated HF1 endpoints) L5
Same window in equiatomic HfNbTaTiZr NONE (different composition; not tested) —
Oxygen / N / C in L5's alloys NONE (not measured) —
Unrestricted CALPHAD matches experiment NONE (authors say it does not) L5
Restricted-phase CALPHAD useful for Hf–Fe precipitate trends WEAK (calculation; phase set chosen to match experiment) L5

Answer to OQ5 of the Nov 4 note (analysis). OQ5 asked for a real dopant window in this family: Fe micro-alloying of Ti-Zr-Hf-Nb-Ta with ductility against Fe level and ageing. Yes, in the host Li et al. actually made. Fe is a true minor addition (3.35–3.5 at.%), not a principal element and not an interstitial like the oxygen notes. A 0.15 at.% Fe cut plus short ageing (HF2-525-30) sits near 1037 MPa / 14% elongation ( STRONG as measured); leaner Fe + no age (HF2-ST) sits near 955 MPa / 19% ( STRONG); richer Fe + visible GB Hf₂Fe (HF1-500-30, restated) or longer age (HF2-525-60) cuts elongation to 7.5% ( WEAK) or 2.65% ( STRONG); a continuous GB network (HF1-600-30) collapses both strength and ductility ( STRONG). That is a sourced concentration + ageing ductility window on Bridge A's home ground ( STRONG as materials in this host). It is not a window for equiatomic HfNbTaTiZr ( NONE), and oxygen is still NONE, so it does not settle the equiatomic oxygen / unstable-band line.

Contrast with the oxygen-interstitial notes (analysis). Prior Path E notes (dose-window, ductility-ceiling, tensile-pair, ageing-stability) vary oxygen — an interstitial solute — in equiatomic or near-equiatomic refractory hosts. Tonight varies Fe — a substitutional micro-alloying addition — in a deliberately non-equiatomic, Hf- and Ta-rich Ti-Zr-Hf-Nb-Ta host. Same family name in the title; different host stoichiometry; different dopant class. Do not merge the windows.

Design-relevant reading (analysis). (1) In this HF1/HF2 chemistry, ductility is tunable over a wide span at nearly constant strength by small Fe and short ageing changes ( STRONG as observed span). (2) The useful balance point in the set is the one where precipitates are not yet seen in TEM (HF2-525-30); once discontinuous ~9 nm GB precipitates appear, elongation collapses ( STRONG as paired observations). (3) Continuous GB coverage is catastrophic here (HF1-600-30) ( STRONG). (4) Transfer to equiatomic HfNbTaTiZr needs its own Fe (or other micro-addition) ladder — not claimed.

Counting rule. Only contradicting data count. L5 does not contradict C2/Y4/P1/L3 on the equiatomic unstable band (different alloy). HF1 restated numbers are not counted as an independent confirmation of Liu. No source counted twice.


SPECULATIVE Cross-domain section. Open after the materials.

4. Bridge A — SPECULATIVE (after the materials)

Bridge A (locked): doping concentration windows and over-doping ↔ valencyArity: how many actants a predicate takes; formal vs semantic valency can diverge., argument saturation and over-arity. Shapes only:

  • A window with a true minor addition. Unlike the oxygen notes (interstitial solute in a principal-element host), Fe here is named and used as micro-alloying: a small extra part whose amount moves the outcome. Shape: the window is easier to read when the varied species is actually a minor addition, not one of the named principals. Shape only.
  • Concentration + ageing clock. The same nominal Fe can sit on different points of the ductility span as ageing time/temperature change (HF2-525-30 vs HF2-525-60; HF1-500-30 vs HF1-600-30). Shape: a dose window is also a clock window; over-ageing overfills the same way over-dosing does. Shape only.
  • Re-housing at the grain boundary. Fe leaves the solution and sits as Hf₂Fe on boundaries; ductility falls as that boundary population grows and then goes continuous. Shape: an argument that was inside the unit is re-housed at an edge, and too much at the edge breaks the combination. Shape only.
  • Still continuous. Fe at.%, ageing minutes, MPa and % elongation are continuous amounts; the lock "continuous wt% ≠ discrete arity" holds; nothing here counts slots.

Bridge A pressure: none that forces revision. Bridge A unrevised. No chemical stand-in for a theta role, slot or feature bundle; not a correlate; not a joint field. Merge/Agree not involved. No Navajo remark tonight. (Grant's dropped 2026-11-02 "roles not words" theory is not reported as open.)


5. Open questions

  1. Equiatomic transfer. Does a similar Fe (or other micro-addition) ladder exist in equiatomic HfNbTaTiZr, or does the non-equiatomic Hf/Ta-rich host do essential work? Side-light (not equiatomic) from Carbon micro-addition and grain-boundary oxide in a Hf-bearing host: a tensile threshold between 0.4 and 0.6 at.% C (Nb44Ta44Hf10W2) (2026-11-11 evening): a second sourced micro-addition tension window in a Hf-bearing refractory host — carbon 0–1 at.% in arc-melted Nb44Ta44Hf10W2 (Shen et al. 2025 preprint, CC BY): brittle at ≤ 0.4 at.% C, 11.4–13.3% at 0.6–1.0 at.% ( STRONG as tabulated), acting through grain boundaries (GB carbide replaces GB HfO₂); carbon and oxygen co-vary. Equiatomic HfNbTaTiZr ladder still NONE (no open source found again). Lead from Boron inside the grains vs on the boundaries: a dilute Re + B ladder in Nb45Ta27Ti13Hf15, beside a blocked equiatomic boron lead (2026-11-12 evening): first equiatomic micro-addition paper with an open licence — Wu et al. 2026 (Acta Mater. 311: 122210, CC BY), 30 appm B in equiatomic TiNbZrHfTa, B + Zr on GBs, YS 920.7 → 869.8 MPa — body blocked, abstract only ( WEAK), one step not a ladder; readable side-light in Zr-free Nb45Ta27Ti13Hf15 (An et al. 2026 PNAS, CC BY-NC-ND): Re 1.5 + B 0.3 at.% raise YS 722 → 968 MPa ( STRONG as tabulated) with B in the grains. Equiatomic ladder still NONE.
  2. HF2-525-30 precipitates. APT or higher-resolution work: are there really GB precipitates below the TEM limit, or is the strength rise from something else (clusters, residual dislocation structure, interstitial pickup)?
  3. Oxygen in the Fe-micro-alloyed host. Measure O/N/C before and after the 500–600 °C ages; the equiatomic line says vacuum/ageing can move interstitial content.
  4. Liu et al. 2022 primary. Answered in part by Ti–Zr–Hf–Nb–Ta–Fe baseline (Liu 2022): F2.5-ST ~971 MPa / ~17.5% and aged continuous GB Hf₂Fe (2026-11-06 evening): F2.5-ST ~971 MPa / ~17.5% and F2.5-500-30 ~1081 MPa with continuous ~25 nm GB Hf₂Fe are now STRONG as primary prose (YS and ST elongation match Li's HF1 restatement); aged elongation 7.5% stays WEAK (not in Liu prose); F2.5 at.% NONE in Liu; HF1≡F2.5 OPEN; Liu continuous ~25 nm vs Li discontinuous ~5 nm is a STRONG text conflict.
  5. Table 1 time for HF1-600-30. Name says 30 min; table cell says 60. Which did they run?
  6. Carried: OQ1–OQ4, OQ6 of HfNbTaTiZr between 550 and 1000 °C: where the unstable band ends (two edges, not one) (900 °C tension; phases at 900 °C; hcp edge primary; Y21 tension; carried stack); OQ1, OQ2, OQ4 of HfNbTaTiZr at 873 K: nanoscale hcp and a stress rise in one batch (compression only); OQ1, OQ2, OQ4 of HfNbTaTiZr after hot isostatic pressing: an HCP phase and no tensile stretch; OQ1–OQ3 of Oxygen in HfNbTaTiZr: measured 0.27 vs 3.24 at.%, stability on ageing; OQ2–OQ4 of Oxygen in a Ta-bearing five-element alloy: one measured tensile pair; OQ2 of Where added oxygen stops helping ductility: a tensile ladder in Ti–Zr–Nb; OQ1/OQ4 of Oxygen added on purpose: a dose window in refractory high-entropy alloys.

6. Separation

SOURCED (inside metallurgy)

L5: HF1 Ti₁₅Zr₁₀Hf₃₆.₅Nb₁₀Ta₂₅Fe₃.₅ and HF2 Ti₁₅Zr₁₀Hf₃₆.₆₅Nb₁₀Ta₂₅Fe₃.₃₅; arc-melted under Ar from >99.9 wt.% metals, drop-cast, ST 1300 °C / 2 h + WQ, then aged + WQ; ST states precipitate-free; HF1-500-30 discontinuous ~5 nm GB precipitates; HF1-600-30 continuous ~19 nm; HF2-525-30 none seen in SEM/TEM; HF2-525-60 discontinuous ~9 nm; HF2-525-24h continuous FCC Fe-rich / Ti-poor GB phase, called Hf₂Fe after Liu [4]; Table 2 tensile set as above (HF1-ST / HF1-500-30 from [4]; others this work); authors' elongation span 2.65–19% at 955–1081 MPa; unrestricted CALPHAD mismatches experiment; restricted BCC/FCC/NiTi₂ matches; no oxygen measured. Liu et al. 2022 not opened.

ANALYSIS (mine, beside the sources)

The grades; the OQ5 answer (yes in this non-equiatomic host; not transferred to equiatomic); the dopant-class contrast with the oxygen-interstitial notes; design readings; the Table 1 name/cell conflict; the counting.

SPECULATIVE

§4 (Bridge A shapes).

Not claimed

No chemical correlate. No chemical stand-in for a theta role, a feature bundle or a slot. Not a joint field. Bridge A unrevised. No number read off a figure. No oxygen level. No equiatomic Fe window. Nothing from Liu et al. 2022, Stepanov et al. 2018, Yasuda 2021 body or Zhao 2025 body directly. The dropped roles-not-words theory is not treated as open.


7. Verdict

Does an opened source give a real dopant window in the Ti-Zr-Hf-Nb-Ta family? Yes, for the host Li et al. 2025 actually made: Fe at 3.35–3.5 at.% is a true micro-alloying addition that seeds nano Hf₂Fe at grain boundaries, and Fe dose plus ageing move elongation from about 19% to about 2.65% while strength stays between about 955 and 1081 MPa ( STRONG as a measured span; HF1 endpoints WEAK as restated from Liu 2022). The balanced point is HF2-525-30 at 1037 ± 17 MPa / 14 ± 1% with no precipitate seen in SEM/TEM ( STRONG as measured; precipitate-below-TEM HYPOTHESIS). Is it the equiatomic HfNbTaTiZr window? No claim: different stoichiometry, oxygen NONE, equiatomic Fe ladder NONE. OQ5 of the Nov 4 note is answered for this Fe-micro-alloyed non-equiatomic host. Bridge A unrevised; shapes only, after the materials.


v0 — 2026-11-05 PT, evening. Pointers added: corpus-reading-order row; CONCLUSIONS-v1-addendum paragraph; site-content-map (inventory, slug, near-ready, Path E page row); back-pointer at hfnbtatizr-unstable-band-edges §5 OQ5 (+ footer). Quotes machine-checked against the captured text (lit/_pdfs/hea-fe-li2025/check_quotes_li2025.py). Speculation flagged. Bridge A lock unrevised. No joint field. Back-pointer 2026-11-06: §5 OQ4 answered in part by Ti–Zr–Hf–Nb–Ta–Fe baseline (Liu 2022): F2.5-ST ~971 MPa / ~17.5% and aged continuous GB Hf₂Fe. Back-pointer 2026-11-11: §5 OQ1 side-light from Carbon micro-addition and grain-boundary oxide in a Hf-bearing host: a tensile threshold between 0.4 and 0.6 at.% C (Nb44Ta44Hf10W2). Back-pointer 2026-11-12: §5 OQ1 in part (blocked equiatomic boron lead + Re/B side-light) from Boron inside the grains vs on the boundaries: a dilute Re + B ladder in Nb45Ta27Ti13Hf15, beside a blocked equiatomic boron lead.

Corpus note: tizrhfnbta-fe-ductility-window-v0.md. The metallurgy is same-domain description from the source the note lists as opened: Li, Ke, Wang, Wang & Xue 2025 (Materials 18: 1463, CC BY; PMC11989734), as the Europe PMC full-text XML read as text, with the PMC HTML page used to cross-check Tables 1–3; the MDPI PDF returned HTTP 403 and the Europe PMC PDF render also 403, and neither was routed around, so no PDF was obtained and no number is read off a figure. Quotes are verbatim and machine-checked. The host is non-equiatomic Ti₁₅Zr₁₀Hf≈₃₆Nb₁₀Ta₂₅ plus Fe at 3.35–3.5 at.%; it is not equiatomic HfNbTaTiZr, and no equiatomic transfer is claimed. Oxygen, nitrogen and carbon are not measured, so no oxygen level is given. HF1-ST and HF1-500-30 yield / ST-elongation numbers are restated from Liu et al. 2022; that primary is now opened in the companion note tizrhfnbta-fe-liu2022-baseline-v0.md (aged elongation 7.5% still not in Liu prose). The grades (STRONG / WEAK / NONE / HYPOTHESIS) and the comparisons between sources are analysis, not a declared correlate. The Bridge A section comes after the materials and is speculative. No chemical stand-in for a theta role or a slot. Bridge A unrevised. Not a joint field.